From a0ef42e77c367312df7edc78dbd0d18a3faf9808 Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Fri, 24 Apr 2020 02:22:44 +0200 Subject: ath79: add support for Ubiquiti PowerBeam 5AC 500 The Ubiquiti PowerBeam 5AC 500 (PBE-5AC-500) is an outdoor 802.11ac 5 GHz bridge with a radio feed and a dish antenna. Specifications: - SoC: Qualcomm Atheros QCA9558 - RAM: 128 MB DDR2 - Flash: 16 MB SPI NOR (mx25l12805d) - Ethernet: 1x 10/100/1000 Mbps Atheros 8031, 24 Vdc PoE-in - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff - Buttons: 1x (reset) - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue - UART: not tested Not supported: - RSSI LEDs (probably through 74HC595 chip) Installation from stock airOS firmware: - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at https://openwrt.org/toh/ubiquiti/common Signed-off-by: Roger Pueyo Centelles --- target/linux/ath79/image/generic-ubnt.mk | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index d056ab6783..577ae98624 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -69,6 +69,15 @@ define Device/ubnt-wa UBNT_VERSION := 8.5.0 endef +define Device/ubnt-xc + $(Device/ubnt) + IMAGE_SIZE := 15744k + UBNT_BOARD := XC + UBNT_CHIP := qca955x + UBNT_TYPE := XC + UBNT_VERSION := 8.5.0 +endef + define Device/ubnt-xm $(Device/ubnt) DEVICE_VARIANT := XM @@ -243,6 +252,15 @@ define Device/ubnt_picostation-m endef TARGET_DEVICES += ubnt_picostation-m +define Device/ubnt_powerbeam-5ac-500 + $(Device/ubnt-xc) + SOC := qca9558 + DEVICE_MODEL := PowerBeam 5AC + DEVICE_VARIANT := 500 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct +endef +TARGET_DEVICES += ubnt_powerbeam-5ac-500 + define Device/ubnt_powerbeam-5ac-gen2 $(Device/ubnt-wa) DEVICE_MODEL := PowerBeam 5AC -- cgit v1.2.3