From af56075a8ff760832df27546325428f2497a0121 Mon Sep 17 00:00:00 2001 From: Roberto Valentini Date: Thu, 1 Jul 2021 11:56:30 +0200 Subject: ath79: add support for TP-Link RE455 v1 TP-Link RE455 v1 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v3 Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB[1] Flash instruction: Apply factory image in OEM firmware web-gui. [1] Didn't work, probably need to short unpopulated resistor R64 and R69 as RE450v3 Signed-off-by: Roberto Valentini --- target/linux/ath79/image/generic-tp-link.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 9c4920b4e6..16494b111f 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -486,6 +486,18 @@ define Device/tplink_re450-v3 endef TARGET_DEVICES += tplink_re450-v3 +define Device/tplink_re455-v1 + $(Device/tplink-safeloader) + SOC := qca9563 + IMAGE_SIZE := 7808k + DEVICE_MODEL := RE455 + DEVICE_VARIANT := v1 + DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct + TPLINK_BOARD_ID := RE455-V1 + LOADER_TYPE := elf +endef +TARGET_DEVICES += tplink_re455-v1 + define Device/tplink_tl-mr6400-v1 $(Device/tplink-8mlzma) SOC := qca9531 -- cgit v1.2.3