From eb531337a779a48a2d17bc66f0d222325d6c1563 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Tue, 18 Aug 2020 13:49:15 +0200 Subject: ath79: add support for TP-Link TL-WR710N v2.1 This adds support for the TP-Link TL-WR710N v2.1. It is basically a re-issue of the v1.2. Specifications: SoC: Atheros AR9331 CPU: 400 MHz Flash: 8 MiB RAM: 32 MiB WiFi: 2.4 GHz b/g/n Ethernet: 2x 100M ports USB: 1x 2.0 The only difference from the v1 is the TP-Link hardware ID/revision. Attention: The TL-WR710N v2.0 (!) has only 4 MB flash and cannot be flashed with this image. It has a different TPLINK_HWREV, so accidental flashing of the factory image should be impossible without additional measures. Unfortunately, the v2.0 in ar71xx has the same board name, so sysupgrade from ar71xx v2.0 into ath79 v1/v2.1 will not be prevented, but will brick the device. Flashing instruction: Upload the factory image via the OEM firmware GUI upgrade mechanism. Further notes: To make implementation easier if somebody desires to port the 4M v2.0, this already creates two DTSI files. Signed-off-by: Adrian Schmutzler Tested-by: Fabian Eppig --- target/linux/ath79/image/generic-tp-link.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index fdc94b738a..7128d853f8 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -625,6 +625,18 @@ define Device/tplink_tl-wr710n-v1 endef TARGET_DEVICES += tplink_tl-wr710n-v1 +define Device/tplink_tl-wr710n-v2.1 + $(Device/tplink-8mlzma) + SOC := ar9331 + DEVICE_MODEL := TL-WR710N + DEVICE_VARIANT := v2.1 + DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-usb-ledtrig-usbport + TPLINK_HWID := 0x07100002 + TPLINK_HWREV := 0x2 + SUPPORTED_DEVICES += tl-wr710n +endef +TARGET_DEVICES += tplink_tl-wr710n-v2.1 + define Device/tplink_tl-wr810n-v1 $(Device/tplink-8mlzma) SOC := qca9531 -- cgit v1.2.3