From e7bfda2c243e66a75ff966ba04c28b1590b5d24c Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Sat, 8 Feb 2020 20:33:30 +0100
Subject: brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 .../bcm63xx/dts/bcm6345-dynalink-rta770bw.dts      | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts

(limited to 'target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts')

diff --git a/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts
new file mode 100644
index 0000000000..f678762c86
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "bcm6345.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Siemens Gigaset SE515";
+	compatible = "dynalink,rta770bw", "brcm,bcm6345";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "RTA770BW:green:usb";
+			gpios = <&gpio0 7 1>;
+		};
+
+		adsl {
+			label = "RTA770BW:green:adsl";
+			gpios = <&gpio0 8 0>;
+		};
+
+		diag {
+			label = "RTA770BW:green:diag";
+			gpios = <&gpio0 10 1>;
+		};
+
+		wlan {
+			label = "RTA770BW:green:wlan";
+			gpios = <&gpio0 11 1>;
+		};
+	};
+};
+
+&pflash {
+	status = "ok";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			label = "CFE";
+			reg = <0x000000 0x010000>;
+			read-only;
+		};
+
+		linux@10000 {
+			label = "linux";
+			reg = <0x010000 0x3e0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		nvram@3f0000 {
+			label = "nvram";
+			reg = <0x3f0000 0x010000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};
-- 
cgit v1.2.3