From d43b963b3d1172fbe7e3f57f88da11e4d7e54c95 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sat, 15 Aug 2020 17:21:35 +0200 Subject: bcm63xx: reorganize board patches This renames board patches to make finding devices easier and reorders them based on their board. The devices are grouped based on the board/cpu_id. New device patches should be numbered based on their group. Signed-off-by: Adrian Schmutzler --- .../523-board_bcm6328-d-link-dsl-274xb-f.patch | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch (limited to 'target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch') diff --git a/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch b/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch new file mode 100644 index 0000000000..97f71e115a --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch @@ -0,0 +1,79 @@ +From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Mon, 30 Apr 2012 09:10:51 +0200 +Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link + DSL-274xB rev F1 + +--- + arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++ + 1 files changed, 104 insertions(+), 0 deletions(-) + +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -381,6 +381,50 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_dsl_274xb_f1 = { ++ .name = "AW4339U", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_ATHEROS, ++ .caldata_offset = 0x7d1000, ++ .slot = 0, ++ .led_pin = -1, ++ .led_active_high = 1, ++ }, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 1", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6328 */ + + /* +@@ -736,6 +780,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, + &board_963281TAN, ++ &board_dsl_274xb_f1, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, +@@ -777,6 +822,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, ++ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, -- cgit v1.2.3