From 0834f9f07631a8857a96614e37cb21e1dc84ffb4 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 25 Feb 2016 10:14:05 +0000 Subject: brcm2708: remove linux 4.1 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas SVN-Revision: 48766 --- ...BCM270X_DT-Add-pwm-and-pwm-2chan-overlays.patch | 250 --------------------- 1 file changed, 250 deletions(-) delete mode 100644 target/linux/brcm2708/patches-4.1/0154-BCM270X_DT-Add-pwm-and-pwm-2chan-overlays.patch (limited to 'target/linux/brcm2708/patches-4.1/0154-BCM270X_DT-Add-pwm-and-pwm-2chan-overlays.patch') diff --git a/target/linux/brcm2708/patches-4.1/0154-BCM270X_DT-Add-pwm-and-pwm-2chan-overlays.patch b/target/linux/brcm2708/patches-4.1/0154-BCM270X_DT-Add-pwm-and-pwm-2chan-overlays.patch deleted file mode 100644 index 28fe2688e6..0000000000 --- a/target/linux/brcm2708/patches-4.1/0154-BCM270X_DT-Add-pwm-and-pwm-2chan-overlays.patch +++ /dev/null @@ -1,250 +0,0 @@ -From 4eac708a344a2fc86a1cacebedc7cd5650d83231 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 17 Aug 2015 10:49:44 +0100 -Subject: [PATCH 154/222] BCM270X_DT: Add pwm and pwm-2chan overlays - -From the README entries: - Legal pin,function combinations for each channel: - PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) - PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) - N.B.: - 1) Pin 18 is the only one available on all platforms, and - it is the one used by the I2S audio interface. - Pins 12 and 13 might be better choices on an A+, B+ or Pi2. - 2) The onboard analogue audio output uses both PWM channels. - 3) So be careful mixing audio and PWM. - 4) Currently the clock must have been enabled and configured - by other means. - -See: https://github.com/raspberrypi/linux/issues/756 ---- - arch/arm/boot/dts/bcm2708_common.dtsi | 16 +++++++++ - arch/arm/boot/dts/overlays/Makefile | 2 ++ - arch/arm/boot/dts/overlays/README | 41 +++++++++++++++++++++ - arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts | 46 ++++++++++++++++++++++++ - arch/arm/boot/dts/overlays/pwm-overlay.dts | 42 ++++++++++++++++++++++ - arch/arm/configs/bcm2709_defconfig | 1 + - arch/arm/configs/bcmrpi_defconfig | 1 + - drivers/pwm/Kconfig | 2 +- - 8 files changed, 150 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts - ---- a/arch/arm/boot/dts/bcm2708_common.dtsi -+++ b/arch/arm/boot/dts/bcm2708_common.dtsi -@@ -154,6 +154,14 @@ - status = "disabled"; - }; - -+ pwm: pwm@7e20c000 { -+ compatible = "brcm,bcm2835-pwm"; -+ reg = <0x7e20c000 0x28>; -+ clocks = <&clk_pwm>; -+ #pwm-cells = <2>; -+ status = "disabled"; -+ }; -+ - uart1: uart@7e215040 { - compatible = "brcm,bcm2835-aux-uart", "ns16550"; - reg = <0x7e215040 0x40>; -@@ -279,6 +287,14 @@ - clock-output-names = "apb_pclk"; - clock-frequency = <126000000>; - }; -+ -+ clk_pwm: clock@5 { -+ compatible = "fixed-clock"; -+ reg = <3>; -+ #clock-cells = <0>; -+ clock-output-names = "pwm"; -+ clock-frequency = <100000000>; -+ }; - }; - - __overrides__ { ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -35,6 +35,8 @@ dtb-$(RPI_DT_OVERLAYS) += mz61581-overla - dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb - dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb - dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb -+dtb-$(RPI_DT_OVERLAYS) += pwm-overlay.dtb -+dtb-$(RPI_DT_OVERLAYS) += pwm-2chan-overlay.dtb - dtb-$(RPI_DT_OVERLAYS) += rpi-dac-overlay.dtb - dtb-$(RPI_DT_OVERLAYS) += rpi-display-overlay.dtb - dtb-$(RPI_DT_OVERLAYS) += rpi-ft5406-overlay.dtb ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -410,6 +410,47 @@ Load: dtoverlay=pps-gpio,= - Params: gpiopin Input GPIO (default "18") - - -+Name: pwm -+Info: Configures a single PWM channel -+ Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+ 4) Currently the clock must have been enabled and configured -+ by other means. -+Load: dtoverlay=pwm-2chan,= -+Load: dtoverlay=pwm,= -+Params: pin Output pin (default 18) - see table -+ func Pin function (default 2 = Alt5) - see above -+ clock PWM clock frequency (informational) -+ -+ -+Name: pwm-2chan -+Info: Configures both PWM channels -+ Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+ 4) Currently the clock must have been enabled and configured -+ by other means. -+Load: dtoverlay=pwm-2chan,= -+Params: pin Output pin (default 18) - see table -+ pin2 Output pin for other channel (default 19) -+ func Pin function (default 2 = Alt5) - see above -+ func2 Function for pin2 (default 2 = Alt5) -+ clock PWM clock frequency (informational) -+ -+ - Name: rpi-dac - Info: Configures the RPi DAC audio card - Load: dtoverlay=rpi-dac ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts -@@ -0,0 +1,46 @@ -+/dts-v1/; -+/plugin/; -+ -+/* -+This is the 2-channel overlay - only use it if you need both channels. -+ -+Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ -+N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+*/ -+ -+/ { -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ pwm_pins: pwm_pins { -+ brcm,pins = <18 19>; -+ brcm,function = <2 2>; /* Alt5 */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&pwm>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ pin = <&pwm_pins>,"brcm,pins:0"; -+ pin2 = <&pwm_pins>,"brcm,pins:4"; -+ func = <&pwm_pins>,"brcm,function:0"; -+ func2 = <&pwm_pins>,"brcm,function:4"; -+ clock = <&clk_pwm>,"clock-frequency:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts -@@ -0,0 +1,42 @@ -+/dts-v1/; -+/plugin/; -+ -+/* -+Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ -+N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+*/ -+ -+/ { -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ pwm_pins: pwm_pins { -+ brcm,pins = <18>; -+ brcm,function = <2>; /* Alt5 */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&pwm>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ pin = <&pwm_pins>,"brcm,pins:0"; -+ func = <&pwm_pins>,"brcm,function:0"; -+ clock = <&clk_pwm>,"clock-frequency:0"; -+ }; -+}; ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -1089,6 +1089,7 @@ CONFIG_IIO_BUFFER=y - CONFIG_IIO_BUFFER_CB=y - CONFIG_IIO_KFIFO_BUF=m - CONFIG_DHT11=m -+CONFIG_PWM_BCM2835=m - CONFIG_RASPBERRYPI_FIRMWARE=y - CONFIG_EXT4_FS=y - CONFIG_EXT4_FS_POSIX_ACL=y ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -1082,6 +1082,7 @@ CONFIG_IIO_BUFFER=y - CONFIG_IIO_BUFFER_CB=y - CONFIG_IIO_KFIFO_BUF=m - CONFIG_DHT11=m -+CONFIG_PWM_BCM2835=m - CONFIG_RASPBERRYPI_FIRMWARE=y - CONFIG_EXT4_FS=y - CONFIG_EXT4_FS_POSIX_ACL=y ---- a/drivers/pwm/Kconfig -+++ b/drivers/pwm/Kconfig -@@ -85,7 +85,7 @@ config PWM_BCM_KONA - - config PWM_BCM2835 - tristate "BCM2835 PWM support" -- depends on ARCH_BCM2835 -+ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 - help - PWM framework driver for BCM2835 controller (Raspberry Pi) - -- cgit v1.2.3