From 7e9e6fdac7d05281656e103d6ffa211131fdc943 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 9 Sep 2020 23:10:11 +0200 Subject: gemini: Bring up DSA switches First group the interfaces on the DSA switch into the right LAN/WAN groups. Tested successfully on the D-Link DIR-685 with the RTL8366RB DSA switch. The RTL8366RB is DSA custom tagged and now handled by the kernel tag parser. (Backported.) The Vitesse switches are not capable of supporting DSA per-port tagging. We suspect they must be handled using some custom VLAN set-up. Cc: Pawel Dembicki Signed-off-by: Linus Walleij [sorted devices alphabetically] Signed-off-by: Christian Lamparter --- .../linux/gemini/base-files/etc/board.d/02_network | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100755 target/linux/gemini/base-files/etc/board.d/02_network (limited to 'target/linux/gemini/base-files') diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..f371956a66 --- /dev/null +++ b/target/linux/gemini/base-files/etc/board.d/02_network @@ -0,0 +1,27 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in +dlink,dir-685) + # These are all connected to eth0 thru RTL8366RB + ucidef_set_interface "eth" ifname "eth0" protocol "none" + ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" + ;; +itian,sq201) + # These are all connected to eth1 thru VSC7395 + ucidef_set_interface "eth" ifname "eth1" protocol "none" + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" + ;; +storlink,gemini324) + # These are all connected to eth1 thru VSC7385 + ucidef_set_interface "eth" ifname "eth1" protocol "none" + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" + ;; +esac + +board_config_flush + +exit 0 -- cgit v1.2.3