From 967b6be118e3217e8d6a28df9c615d3255e7b1ae Mon Sep 17 00:00:00 2001 From: Vittorio Gambaletta Date: Sun, 26 Mar 2017 10:08:20 +0200 Subject: ar8327: Add workarounds for AR8337 switch. RGMII RX delay setting needs to be always specified for AR8337 to avoid port 5 RX hang on high traffic / flood conditions. Also, the HOL registers that set per-port and per-packet-priority buffer sizes are updated with the reduced values suggested by the QCA switch team. Finally, AR8327 reserved register fixups are disabled for the AR8337. This patch is adapted from the Code Aurora QSDK, but with magic values mapped to proper defines. Signed-off-by: Vittorio Gambaletta --- .../linux/generic/files/drivers/net/phy/ar8327.c | 42 +++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) (limited to 'target/linux/generic/files/drivers/net/phy/ar8327.c') diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c index 8e67f4b17d..24a13c6418 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8327.c +++ b/target/linux/generic/files/drivers/net/phy/ar8327.c @@ -506,6 +506,14 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv, ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t); t = ar8327_get_pad_cfg(pdata->pad5_cfg); + if (chip_is_ar8337(priv)) { + /* + * Workaround: RGMII RX delay setting needs to be + * always specified for AR8337 to avoid port 5 + * RX hang on high traffic / flood conditions + */ + t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN; + } ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t); t = ar8327_get_pad_cfg(pdata->pad6_cfg); ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t); @@ -670,6 +678,39 @@ ar8327_init_globals(struct ar8xxx_priv *priv) /* Disable EEE on all phy's due to stability issues */ for (i = 0; i < AR8XXX_NUM_PHYS; i++) data->eee[i] = false; + + if (chip_is_ar8337(priv)) { + /* Update HOL registers with values suggested by QCA switch team */ + for (i = 0; i < AR8327_NUM_PORTS; i++) { + if (i == AR8216_PORT_CPU || i == 5 || i == 6) { + t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S; + t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S; + t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S; + t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S; + t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S; + t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S; + t |= 0x1e << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S; + } else { + t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S; + t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S; + t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S; + t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S; + t |= 0x19 << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S; + } + ar8xxx_write(priv, AR8327_REG_PORT_HOL_CTRL0(i), t); + + t = 0x6 << AR8327_PORT_HOL_CTRL1_ING_BUF_S; + t |= AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN; + t |= AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN; + t |= AR8327_PORT_HOL_CTRL1_WRED_EN; + ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(i), + AR8327_PORT_HOL_CTRL1_ING_BUF | + AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN | + AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN | + AR8327_PORT_HOL_CTRL1_WRED_EN, + t); + } + } } static void @@ -1397,7 +1438,6 @@ const struct ar8xxx_chip ar8327_chip = { .atu_flush_port = ar8327_atu_flush_port, .vtu_flush = ar8327_vtu_flush, .vtu_load_vlan = ar8327_vtu_load_vlan, - .phy_fixup = ar8327_phy_fixup, .set_mirror_regs = ar8327_set_mirror_regs, .get_arl_entry = ar8327_get_arl_entry, .sw_hw_apply = ar8327_sw_hw_apply, -- cgit v1.2.3