From da1bb88a2b900f0392b731ec47c5e1bff956fd8f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 26 Jun 2010 20:42:58 +0000 Subject: rename target/linux/generic-2.6 to generic SVN-Revision: 21952 --- .../generic/files/include/linux/glamo-engine.h | 27 ++++ target/linux/generic/files/include/linux/glamofb.h | 35 +++++ .../generic/files/include/linux/gpio_buttons.h | 33 ++++ .../linux/generic/files/include/linux/gpio_dev.h | 42 +++++ .../linux/generic/files/include/linux/myloader.h | 120 ++++++++++++++ target/linux/generic/files/include/linux/pwm/pwm.h | 165 ++++++++++++++++++++ .../linux/generic/files/include/linux/rtl8366rb.h | 21 +++ .../linux/generic/files/include/linux/rtl8366s.h | 21 +++ target/linux/generic/files/include/linux/switch.h | 172 +++++++++++++++++++++ 9 files changed, 636 insertions(+) create mode 100644 target/linux/generic/files/include/linux/glamo-engine.h create mode 100644 target/linux/generic/files/include/linux/glamofb.h create mode 100644 target/linux/generic/files/include/linux/gpio_buttons.h create mode 100644 target/linux/generic/files/include/linux/gpio_dev.h create mode 100644 target/linux/generic/files/include/linux/myloader.h create mode 100644 target/linux/generic/files/include/linux/pwm/pwm.h create mode 100644 target/linux/generic/files/include/linux/rtl8366rb.h create mode 100644 target/linux/generic/files/include/linux/rtl8366s.h create mode 100644 target/linux/generic/files/include/linux/switch.h (limited to 'target/linux/generic/files/include') diff --git a/target/linux/generic/files/include/linux/glamo-engine.h b/target/linux/generic/files/include/linux/glamo-engine.h new file mode 100644 index 0000000000..516d45fa6e --- /dev/null +++ b/target/linux/generic/files/include/linux/glamo-engine.h @@ -0,0 +1,27 @@ +#ifndef __GLAMO_ENGINE_H +#define __GLAMO_ENGINE_H + +enum glamo_engine { + GLAMO_ENGINE_CAPTURE = 0, + GLAMO_ENGINE_ISP = 1, + GLAMO_ENGINE_JPEG = 2, + GLAMO_ENGINE_MPEG_ENC = 3, + GLAMO_ENGINE_MPEG_DEC = 4, + GLAMO_ENGINE_LCD = 5, + GLAMO_ENGINE_CMDQ = 6, + GLAMO_ENGINE_2D = 7, + GLAMO_ENGINE_3D = 8, + GLAMO_ENGINE_MMC = 9, + GLAMO_ENGINE_MICROP0 = 10, + GLAMO_ENGINE_RISC = 11, + GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, + GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, +#if 0 + GLAMO_ENGINE_H264_DEC = 14, + GLAMO_ENGINE_RISC1 = 15, + GLAMO_ENGINE_SPI = 16, +#endif + __NUM_GLAMO_ENGINES +}; + +#endif diff --git a/target/linux/generic/files/include/linux/glamofb.h b/target/linux/generic/files/include/linux/glamofb.h new file mode 100644 index 0000000000..5f9fab5a48 --- /dev/null +++ b/target/linux/generic/files/include/linux/glamofb.h @@ -0,0 +1,35 @@ +#ifndef _LINUX_GLAMOFB_H +#define _LINUX_GLAMOFB_H + +#include + +#ifdef __KERNEL__ + +struct glamo_core; +struct glamofb_handle; + +struct glamo_fb_platform_data { + int width, height; + + int num_modes; + struct fb_videomode *modes; + + struct glamo_core *core; +}; + +int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); +int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val); + +#ifdef CONFIG_MFD_GLAMO +void glamo_lcm_reset(struct platform_device *pdev, int level); +#else +#define glamo_lcm_reset(...) do {} while (0) +#endif + +#endif + +#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32) +#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32) +#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32) + +#endif diff --git a/target/linux/generic/files/include/linux/gpio_buttons.h b/target/linux/generic/files/include/linux/gpio_buttons.h new file mode 100644 index 0000000000..f85b993ed2 --- /dev/null +++ b/target/linux/generic/files/include/linux/gpio_buttons.h @@ -0,0 +1,33 @@ +/* + * Definitions for the GPIO buttons interface driver + * + * Copyright (C) 2007-2010 Gabor Juhos + * + * This file was based on: /include/linux/gpio_keys.h + * The original gpio_keys.h seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _GPIO_BUTTONS_H_ +#define _GPIO_BUTTONS_H_ + +struct gpio_button { + int gpio; /* GPIO line number */ + int active_low; + char *desc; /* button description */ + int type; /* input event type (EV_KEY, EV_SW) */ + int code; /* input event code (KEY_*, SW_*) */ + int threshold; /* count threshold */ +}; + +struct gpio_buttons_platform_data { + struct gpio_button *buttons; + int nbuttons; /* number of buttons */ + int poll_interval; /* polling interval */ +}; + +#endif /* _GPIO_BUTTONS_H_ */ diff --git a/target/linux/generic/files/include/linux/gpio_dev.h b/target/linux/generic/files/include/linux/gpio_dev.h new file mode 100644 index 0000000000..a2a4b51c78 --- /dev/null +++ b/target/linux/generic/files/include/linux/gpio_dev.h @@ -0,0 +1,42 @@ +#ifndef _GPIO_DEV_H__ +#define _GPIO_DEV_H__ + +/********************************************************************* + * + * This Linux kernel header is expanded from the original driver + * (gpio_dev) by John Crispin. It provides an ioctl based interface to + * GPIO pins via the /dev/gpio char device and gpiolib within the kernel. + * The third argument to each ioctl is the GPIO pin number. + * + * This driver has been tested with lk 2.6.31 and works. The original + * driver fails quietly with this version. The protocol is now a bit + * different: the ioctl(fd, GPIO_REQUEST, ) should be called + * after the open("/dev/gpio", O_RDWR) to determine if the is + * already in use. If the ioctl is successful (i.e. returns 0 for not + * in use) then the is claimed by this driver and + * ioctl(fd, GPIO_FREE, ) should be called prior to close(fd) . + * + * See /Documentation/gpio.txt + * Note that kernel designers prefer the use of the sysfs gpio interface. + * This char driver is easier to use from code and faster. + ********************************************************************/ + +/* This header can be included in both the user and kernel spaces */ +/* The _IO macro is defined in sys/ioctl.h */ + +#define IOC_GPIODEV_MAGIC 'B' + +#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10) +#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11) +#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12) +#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13) +#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14) + /* Sets the direction out and clears the (low) */ + +#define GPIO_DIR_HIGH _IO(IOC_GPIODEV_MAGIC, 15) + /* Sets the direction out and sets the (high) */ +#define GPIO_REQUEST _IO(IOC_GPIODEV_MAGIC, 16) +#define GPIO_FREE _IO(IOC_GPIODEV_MAGIC, 17) +#define GPIO_CAN_SLEEP _IO(IOC_GPIODEV_MAGIC, 18) + +#endif diff --git a/target/linux/generic/files/include/linux/myloader.h b/target/linux/generic/files/include/linux/myloader.h new file mode 100644 index 0000000000..dcba6eb62a --- /dev/null +++ b/target/linux/generic/files/include/linux/myloader.h @@ -0,0 +1,120 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_SYS_PARAMS 0x20021107 +#define MYLO_MAGIC_PARTITIONS 0x20021103 +#define MYLO_MAGIC_BOARD_PARAMS 0x20021103 + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the Atheros AR2317 */ +#define DEVID_COMPEX_NP25G 0x05E6 +#define DEVID_COMPEX_WPE53G 0x05DC + +/* Devices based on the Atheros AR71xx */ +#define DEVID_COMPEX_WP543 0x0640 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_LZMA 0x0100 /* partition data compressed by LZMA */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* size of boot FLASH in bytes */ + uint32_t dram_size; /* size of onboard RAM in bytes */ +}; + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/generic/files/include/linux/pwm/pwm.h b/target/linux/generic/files/include/linux/pwm/pwm.h new file mode 100644 index 0000000000..e01cca9036 --- /dev/null +++ b/target/linux/generic/files/include/linux/pwm/pwm.h @@ -0,0 +1,165 @@ +/* + * include/linux/pwm.h + * + * Copyright (C) 2008 Bill Gatliff < bgat@billgatliff.com> + * + * This program is free software; you may redistribute and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ +#ifndef __LINUX_PWM_H +#define __LINUX_PWM_H + +enum { + PWM_CONFIG_DUTY_TICKS = BIT(0), + PWM_CONFIG_PERIOD_TICKS = BIT(1), + PWM_CONFIG_POLARITY = BIT(2), + PWM_CONFIG_START = BIT(3), + PWM_CONFIG_STOP = BIT(4), + + PWM_CONFIG_HANDLER = BIT(5), + + PWM_CONFIG_DUTY_NS = BIT(6), + PWM_CONFIG_DUTY_PERCENT = BIT(7), + PWM_CONFIG_PERIOD_NS = BIT(8), +}; + +struct pwm_channel; +struct work_struct; + +typedef int (*pwm_handler_t)(struct pwm_channel *p, void *data); +typedef void (*pwm_callback_t)(struct pwm_channel *p); + +struct pwm_channel_config { + int config_mask; + unsigned long duty_ticks; + unsigned long period_ticks; + int polarity; + + pwm_handler_t handler; + + unsigned long duty_ns; + unsigned long period_ns; + int duty_percent; +}; + +struct pwm_device { + struct list_head list; + spinlock_t list_lock; + struct device *dev; + struct module *owner; + struct pwm_channel *channels; + + const char *bus_id; + int nchan; + + int (*request) (struct pwm_channel *p); + void (*free) (struct pwm_channel *p); + int (*config) (struct pwm_channel *p, + struct pwm_channel_config *c); + int (*config_nosleep)(struct pwm_channel *p, + struct pwm_channel_config *c); + int (*synchronize) (struct pwm_channel *p, + struct pwm_channel *to_p); + int (*unsynchronize)(struct pwm_channel *p, + struct pwm_channel *from_p); + int (*set_callback) (struct pwm_channel *p, + pwm_callback_t callback); +}; + +int pwm_register(struct pwm_device *pwm); +int pwm_unregister(struct pwm_device *pwm); + +enum { + FLAG_REQUESTED = 0, + FLAG_STOP = 1, +}; + +struct pwm_channel { + struct list_head list; + struct pwm_device *pwm; + const char *requester; + pid_t pid; + int chan; + unsigned long flags; + unsigned long tick_hz; + + spinlock_t lock; + struct completion complete; + + pwm_callback_t callback; + + struct work_struct handler_work; + pwm_handler_t handler; + void *handler_data; + + int active_high; + unsigned long period_ticks; + unsigned long duty_ticks; +}; + +struct gpio_pwm_platform_data { + int gpio; +}; + +struct pwm_channel * +pwm_request(const char *bus_id, int chan, + const char *requester); + +void pwm_free(struct pwm_channel *pwm); + +int pwm_config_nosleep(struct pwm_channel *pwm, + struct pwm_channel_config *c); + +int pwm_config(struct pwm_channel *pwm, + struct pwm_channel_config *c); + +unsigned long pwm_ns_to_ticks(struct pwm_channel *pwm, + unsigned long nsecs); + +unsigned long pwm_ticks_to_ns(struct pwm_channel *pwm, + unsigned long ticks); + +int pwm_set_period_ns(struct pwm_channel *pwm, + unsigned long period_ns); + +unsigned long int pwm_get_period_ns(struct pwm_channel *pwm); + +int pwm_set_duty_ns(struct pwm_channel *pwm, + unsigned long duty_ns); + +int pwm_set_duty_percent(struct pwm_channel *pwm, + int percent); + +unsigned long pwm_get_duty_ns(struct pwm_channel *pwm); + +int pwm_set_polarity(struct pwm_channel *pwm, + int active_high); + +int pwm_start(struct pwm_channel *pwm); + +int pwm_stop(struct pwm_channel *pwm); + +int pwm_set_handler(struct pwm_channel *pwm, + pwm_handler_t handler, + void *data); + +int pwm_synchronize(struct pwm_channel *p, + struct pwm_channel *to_p); + + +int pwm_unsynchronize(struct pwm_channel *p, + struct pwm_channel *from_p); + + +#endif /* __LINUX_PWM_H */ diff --git a/target/linux/generic/files/include/linux/rtl8366rb.h b/target/linux/generic/files/include/linux/rtl8366rb.h new file mode 100644 index 0000000000..053e2ec04f --- /dev/null +++ b/target/linux/generic/files/include/linux/rtl8366rb.h @@ -0,0 +1,21 @@ +/* + * Platform data definition for the Realtek RTL8366S ethernet switch driver + * + * Copyright (C) 2009-2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8366RB_H +#define _RTL8366RB_H + +#define RTL8366RB_DRIVER_NAME "rtl8366rb" + +struct rtl8366rb_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; +}; + +#endif /* _RTL8366RB_SMI_H */ diff --git a/target/linux/generic/files/include/linux/rtl8366s.h b/target/linux/generic/files/include/linux/rtl8366s.h new file mode 100644 index 0000000000..09173ec200 --- /dev/null +++ b/target/linux/generic/files/include/linux/rtl8366s.h @@ -0,0 +1,21 @@ +/* + * Platform data definition for the Realtek RTL8366S ethernet switch driver + * + * Copyright (C) 2009-2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8366S_H +#define _RTL8366S_H + +#define RTL8366S_DRIVER_NAME "rtl8366s" + +struct rtl8366s_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; +}; + +#endif /* _RTL8366_SMI_H */ diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h new file mode 100644 index 0000000000..25aedb83b0 --- /dev/null +++ b/target/linux/generic/files/include/linux/switch.h @@ -0,0 +1,172 @@ +/* + * switch.h: Switch configuration API + * + * Copyright (C) 2008 Felix Fietkau + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_SWITCH_H +#define __LINUX_SWITCH_H + +#include +#include +#include +#include +#ifndef __KERNEL__ +#include +#include +#include +#else +#include +#endif + +/* main attributes */ +enum { + SWITCH_ATTR_UNSPEC, + /* global */ + SWITCH_ATTR_TYPE, + /* device */ + SWITCH_ATTR_ID, + SWITCH_ATTR_NAME, + SWITCH_ATTR_DEV_NAME, + SWITCH_ATTR_VLANS, + SWITCH_ATTR_PORTS, + SWITCH_ATTR_CPU_PORT, + /* attributes */ + SWITCH_ATTR_OP_ID, + SWITCH_ATTR_OP_TYPE, + SWITCH_ATTR_OP_NAME, + SWITCH_ATTR_OP_PORT, + SWITCH_ATTR_OP_VLAN, + SWITCH_ATTR_OP_VALUE_INT, + SWITCH_ATTR_OP_VALUE_STR, + SWITCH_ATTR_OP_VALUE_PORTS, + SWITCH_ATTR_OP_DESCRIPTION, + /* port lists */ + SWITCH_ATTR_PORT, + SWITCH_ATTR_MAX +}; + +/* commands */ +enum { + SWITCH_CMD_UNSPEC, + SWITCH_CMD_GET_SWITCH, + SWITCH_CMD_NEW_ATTR, + SWITCH_CMD_LIST_GLOBAL, + SWITCH_CMD_GET_GLOBAL, + SWITCH_CMD_SET_GLOBAL, + SWITCH_CMD_LIST_PORT, + SWITCH_CMD_GET_PORT, + SWITCH_CMD_SET_PORT, + SWITCH_CMD_LIST_VLAN, + SWITCH_CMD_GET_VLAN, + SWITCH_CMD_SET_VLAN +}; + +/* data types */ +enum switch_val_type { + SWITCH_TYPE_UNSPEC, + SWITCH_TYPE_INT, + SWITCH_TYPE_STRING, + SWITCH_TYPE_PORTS, + SWITCH_TYPE_NOVAL, +}; + +/* port nested attributes */ +enum { + SWITCH_PORT_UNSPEC, + SWITCH_PORT_ID, + SWITCH_PORT_FLAG_TAGGED, + SWITCH_PORT_ATTR_MAX +}; + +#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000 + +#ifdef __KERNEL__ + +struct switch_dev; +struct switch_op; +struct switch_val; +struct switch_attr; +struct switch_attrlist; + +int register_switch(struct switch_dev *dev, struct net_device *netdev); +void unregister_switch(struct switch_dev *dev); + +struct switch_attrlist { + /* filled in by the driver */ + int n_attr; + const struct switch_attr *attr; +}; + + +struct switch_dev { + int id; + void *priv; + const char *name; + + /* NB: either devname or netdev must be set */ + const char *devname; + struct net_device *netdev; + + int ports; + int vlans; + int cpu_port; + struct switch_attrlist attr_global, attr_port, attr_vlan; + + spinlock_t lock; + struct switch_port *portbuf; + struct list_head dev_list; + unsigned long def_global, def_port, def_vlan; + + int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + int (*get_port_pvid)(struct switch_dev *dev, int port, int *val); + int (*set_port_pvid)(struct switch_dev *dev, int port, int val); + int (*apply_config)(struct switch_dev *dev); + int (*reset_switch)(struct switch_dev *dev); +}; + +struct switch_port { + u32 id; + u32 flags; +}; + +struct switch_val { + const struct switch_attr *attr; + int port_vlan; + int len; + union { + const char *s; + u32 i; + struct switch_port *ports; + } value; +}; + +struct switch_attr { + int disabled; + int type; + const char *name; + const char *description; + + int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + + /* for driver internal use */ + int id; + int ofs; + int max; +}; + +#endif + +#endif -- cgit v1.2.3