From bb83c9dcca9d7080a704e8a04a58ef37e11681fd Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 16 Sep 2017 16:41:48 -0700 Subject: kernel: update to 3.18.71 Delete a bunch of fixes that are already included. Refresh patches. Compile-tested on malta/mipsel Runtime-tested on malta/mipsel Signed-off-by: Florian Fainelli Acked-by: Hauke Mehrtens --- .../pending-3.18/002-phy_drivers_backport.patch | 56 +++++++++++----------- 1 file changed, 28 insertions(+), 28 deletions(-) (limited to 'target/linux/generic/pending-3.18/002-phy_drivers_backport.patch') diff --git a/target/linux/generic/pending-3.18/002-phy_drivers_backport.patch b/target/linux/generic/pending-3.18/002-phy_drivers_backport.patch index c97c759e7e..63071c9997 100644 --- a/target/linux/generic/pending-3.18/002-phy_drivers_backport.patch +++ b/target/linux/generic/pending-3.18/002-phy_drivers_backport.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/adm6996.c +++ b/drivers/net/phy/adm6996.c -@@ -287,7 +287,7 @@ static u16 +@@ -289,7 +289,7 @@ static u16 adm6996_read_mii_reg(struct adm6996_priv *priv, enum admreg reg) { struct phy_device *phydev = priv->priv; @@ -9,7 +9,7 @@ return bus->read(bus, PHYADDR(reg)); } -@@ -296,7 +296,7 @@ static void +@@ -298,7 +298,7 @@ static void adm6996_write_mii_reg(struct adm6996_priv *priv, enum admreg reg, u16 val) { struct phy_device *phydev = priv->priv; @@ -18,7 +18,7 @@ bus->write(bus, PHYADDR(reg), val); } -@@ -1019,13 +1019,13 @@ static int adm6996_config_init(struct ph +@@ -1050,13 +1050,13 @@ static int adm6996_config_init(struct ph pdev->supported = ADVERTISED_100baseT_Full; pdev->advertising = ADVERTISED_100baseT_Full; @@ -35,7 +35,7 @@ if (!priv) return -ENOMEM; -@@ -1045,7 +1045,7 @@ static int adm6996_config_init(struct ph +@@ -1076,7 +1076,7 @@ static int adm6996_config_init(struct ph } /* @@ -44,7 +44,7 @@ */ static int adm6996_read_status(struct phy_device *phydev) { -@@ -1061,7 +1061,7 @@ static int adm6996_read_status(struct ph +@@ -1092,7 +1092,7 @@ static int adm6996_read_status(struct ph } /* @@ -53,7 +53,7 @@ */ static int adm6996_config_aneg(struct phy_device *phydev) { -@@ -1070,11 +1070,11 @@ static int adm6996_config_aneg(struct ph +@@ -1101,11 +1101,11 @@ static int adm6996_config_aneg(struct ph static int adm6996_fixup(struct phy_device *dev) { @@ -67,7 +67,7 @@ return 0; /* look for the switch on the bus */ -@@ -1121,6 +1121,7 @@ static struct phy_driver adm6996_phy_dri +@@ -1152,6 +1152,7 @@ static struct phy_driver adm6996_phy_dri .config_aneg = &adm6996_config_aneg, .read_status = &adm6996_read_status, .soft_reset = adm6996_soft_reset, @@ -75,7 +75,7 @@ }; static int adm6996_gpio_probe(struct platform_device *pdev) -@@ -1193,7 +1194,7 @@ static int __init adm6996_init(void) +@@ -1220,7 +1221,7 @@ static int __init adm6996_init(void) int err; phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup); @@ -95,7 +95,7 @@ ret |= BMCR_ANENABLE | BMCR_ANRESTART; return phy_write(phydev, MII_BMCR, ret); } -@@ -1996,7 +1996,7 @@ ar8xxx_phy_config_init(struct phy_device +@@ -2007,7 +2007,7 @@ ar8xxx_phy_config_init(struct phy_device priv->phy = phydev; @@ -104,7 +104,7 @@ if (chip_is_ar8316(priv)) { /* switch device has been initialized, reinit */ priv->dev.ports = (AR8216_NUM_PORTS - 1); -@@ -2044,7 +2044,7 @@ ar8xxx_check_link_states(struct ar8xxx_p +@@ -2055,7 +2055,7 @@ ar8xxx_check_link_states(struct ar8xxx_p /* flush ARL entries for this port if it went down*/ if (!link_new) priv->chip->atu_flush_port(priv, i); @@ -113,7 +113,7 @@ i, link_new ? "up" : "down"); } -@@ -2063,10 +2063,10 @@ ar8xxx_phy_read_status(struct phy_device +@@ -2074,10 +2074,10 @@ ar8xxx_phy_read_status(struct phy_device if (phydev->state == PHY_CHANGELINK) ar8xxx_check_link_states(priv); @@ -126,7 +126,7 @@ phydev->link = !!link.link; if (!phydev->link) return 0; -@@ -2096,7 +2096,7 @@ ar8xxx_phy_read_status(struct phy_device +@@ -2107,7 +2107,7 @@ ar8xxx_phy_read_status(struct phy_device static int ar8xxx_phy_config_aneg(struct phy_device *phydev) { @@ -135,7 +135,7 @@ return 0; return genphy_config_aneg(phydev); -@@ -2151,15 +2151,15 @@ ar8xxx_phy_probe(struct phy_device *phyd +@@ -2162,15 +2162,15 @@ ar8xxx_phy_probe(struct phy_device *phyd int ret; /* skip PHYs at unused adresses */ @@ -154,7 +154,7 @@ goto found; priv = ar8xxx_create(); -@@ -2168,7 +2168,7 @@ ar8xxx_phy_probe(struct phy_device *phyd +@@ -2179,7 +2179,7 @@ ar8xxx_phy_probe(struct phy_device *phyd goto unlock; } @@ -163,7 +163,7 @@ ret = ar8xxx_probe_switch(priv); if (ret) -@@ -2189,7 +2189,7 @@ ar8xxx_phy_probe(struct phy_device *phyd +@@ -2200,7 +2200,7 @@ ar8xxx_phy_probe(struct phy_device *phyd found: priv->use_count++; @@ -172,7 +172,7 @@ if (ar8xxx_has_gige(priv)) { phydev->supported = SUPPORTED_1000baseT_Full; phydev->advertising = ADVERTISED_1000baseT_Full; -@@ -2277,21 +2277,33 @@ ar8xxx_phy_soft_reset(struct phy_device +@@ -2288,21 +2288,33 @@ ar8xxx_phy_soft_reset(struct phy_device return 0; } @@ -223,7 +223,7 @@ MODULE_LICENSE("GPL"); --- a/drivers/net/phy/ar8327.c +++ b/drivers/net/phy/ar8327.c -@@ -619,11 +619,11 @@ ar8327_hw_init(struct ar8xxx_priv *priv) +@@ -627,11 +627,11 @@ ar8327_hw_init(struct ar8xxx_priv *priv) if (!priv->chip_data) return -ENOMEM; @@ -363,7 +363,7 @@ } -@@ -392,13 +388,12 @@ mvswitch_probe(struct phy_device *pdev) +@@ -398,13 +394,12 @@ mvswitch_probe(struct phy_device *pdev) static int mvswitch_fixup(struct phy_device *dev) { @@ -379,9 +379,9 @@ if (reg != MV_IDENT_VALUE) return 0; -@@ -418,13 +413,14 @@ static struct phy_driver mvswitch_driver - .config_init = &mvswitch_config_init, +@@ -425,13 +420,14 @@ static struct phy_driver mvswitch_driver .config_aneg = &mvswitch_config_aneg, + .aneg_done = &mvswitch_aneg_done, .read_status = &mvswitch_read_status, + .driver = { .owner = THIS_MODULE,}, }; @@ -464,7 +464,7 @@ module_init(psb6970_init); --- a/drivers/net/phy/rtl8306.c +++ b/drivers/net/phy/rtl8306.c -@@ -872,7 +872,7 @@ rtl8306_config_init(struct phy_device *p +@@ -876,7 +876,7 @@ rtl8306_config_init(struct phy_device *p int err; /* Only init the switch for the primary PHY */ @@ -473,7 +473,7 @@ return 0; val.value.i = 1; -@@ -882,7 +882,7 @@ rtl8306_config_init(struct phy_device *p +@@ -886,7 +886,7 @@ rtl8306_config_init(struct phy_device *p priv->dev.ops = &rtl8306_ops; priv->do_cpu = 0; priv->page = -1; @@ -482,7 +482,7 @@ chipid = rtl_get(dev, RTL_REG_CHIPID); chipver = rtl_get(dev, RTL_REG_CHIPVER); -@@ -928,13 +928,13 @@ rtl8306_fixup(struct phy_device *pdev) +@@ -932,13 +932,13 @@ rtl8306_fixup(struct phy_device *pdev) u16 chipid; /* Attach to primary LAN port and WAN port */ @@ -498,7 +498,7 @@ chipid = rtl_get(&priv.dev, RTL_REG_CHIPID); if (chipid == 0x5988) pdev->phy_id = RTL8306_MAGIC; -@@ -952,14 +952,14 @@ rtl8306_probe(struct phy_device *pdev) +@@ -956,14 +956,14 @@ rtl8306_probe(struct phy_device *pdev) * share one rtl_priv instance between virtual phy * devices on the same bus */ @@ -515,7 +515,7 @@ found: pdev->priv = priv; -@@ -980,7 +980,7 @@ rtl8306_config_aneg(struct phy_device *p +@@ -984,7 +984,7 @@ rtl8306_config_aneg(struct phy_device *p struct rtl_priv *priv = pdev->priv; /* Only for WAN */ @@ -524,7 +524,7 @@ return 0; /* Restart autonegotiation */ -@@ -996,7 +996,7 @@ rtl8306_read_status(struct phy_device *p +@@ -1000,7 +1000,7 @@ rtl8306_read_status(struct phy_device *p struct rtl_priv *priv = pdev->priv; struct switch_dev *dev = &priv->dev; @@ -533,7 +533,7 @@ /* WAN */ pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10; pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF; -@@ -1037,6 +1037,7 @@ static struct phy_driver rtl8306_driver +@@ -1041,6 +1041,7 @@ static struct phy_driver rtl8306_driver .config_init = &rtl8306_config_init, .config_aneg = &rtl8306_config_aneg, .read_status = &rtl8306_read_status, @@ -541,7 +541,7 @@ }; -@@ -1044,7 +1045,7 @@ static int __init +@@ -1048,7 +1049,7 @@ static int __init rtl_init(void) { phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup); -- cgit v1.2.3