From 786bf7fdaca4c75e7eba6e9aa3a8b5775fd21186 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Mon, 21 Mar 2022 01:16:48 +0000 Subject: kernel: delete Linux 5.4 config and patches As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle (cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606) --- .../730-net-phy-at803x-fix-feature-detection.patch | 66 ---------------------- 1 file changed, 66 deletions(-) delete mode 100644 target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch (limited to 'target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch') diff --git a/target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch b/target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch deleted file mode 100644 index f25952a2cc..0000000000 --- a/target/linux/generic/pending-5.4/730-net-phy-at803x-fix-feature-detection.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 97ca310aa18a93329ef5cd68c20de89761962f45 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sun, 13 Jun 2021 12:19:36 +0200 -Subject: [PATCH] net: phy: at803x: fix feature detection - -AR8031/AR8033 have different status registers for copper -and fiber operation. However, the extended status register -is the same for both operation modes. - -As a result of that, ESTATUS_1000_XFULL is set to 1 even when -operating in copper TP mode. - -Remove this mode from the supported link modes, as this driver -currently only supports copper operation. - -Signed-off-by: David Bauer ---- - drivers/net/phy/at803x.c | 30 +++++++++++++++++++++++++++++- - 1 file changed, 29 insertions(+), 1 deletion(-) - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -411,6 +411,34 @@ static int at803x_aneg_done(struct phy_d - return aneg_done; - } - -+static int at803x_get_features(struct phy_device *phydev) -+{ -+ int err; -+ -+ err = genphy_read_abilities(phydev); -+ if (err) -+ return err; -+ -+ if (!(phydev->phy_id & phydev->drv->phy_id_mask) == (ATH8031_PHY_ID & phydev->drv->phy_id_mask)) -+ return 0; -+ -+ /* AR8031/AR8033 have different status registers -+ * for copper and fiber operation. However, the -+ * extended status register is the same for both -+ * operation modes. -+ * -+ * As a result of that, ESTATUS_1000_XFULL is set -+ * to 1 even when operating in copper TP mode. -+ * -+ * Remove this mode from the supported link modes, -+ * as this driver currently only supports copper -+ * operation. -+ */ -+ linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, -+ phydev->supported); -+ return 0; -+} -+ - static int at803x_read_status(struct phy_device *phydev) - { - int ss, err, old_link = phydev->link; -@@ -513,7 +541,7 @@ static struct phy_driver at803x_driver[] - .resume = at803x_resume, - .read_page = at803x_read_page, - .write_page = at803x_write_page, -- /* PHY_GBIT_FEATURES */ -+ .get_features = at803x_get_features, - .read_status = at803x_read_status, - .aneg_done = at803x_aneg_done, - .ack_interrupt = &at803x_ack_interrupt, -- cgit v1.2.3