From 786bf7fdaca4c75e7eba6e9aa3a8b5775fd21186 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Mon, 21 Mar 2022 01:16:48 +0000 Subject: kernel: delete Linux 5.4 config and patches As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle (cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606) --- ...net-avoid-tx-fault-with-Nokia-GPON-module.patch | 108 --------------------- 1 file changed, 108 deletions(-) delete mode 100644 target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch (limited to 'target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch') diff --git a/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch b/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch deleted file mode 100644 index 6648d10c81..0000000000 --- a/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 283b211aa01bdae94dffb3121655dbb20bf237f4 Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Tue, 3 Dec 2019 15:22:05 +0000 -Subject: net: sfp: avoid tx-fault with Nokia GPON module - -The Nokia GPON module can hold tx-fault active while it is initialising -which can take up to 60s. Avoid this causing the module to be declared -faulty after the SFP MSA defined non-cooled module timeout. - -Signed-off-by: Russell King ---- - drivers/net/phy/sfp.c | 42 ++++++++++++++++++++++++++++++------------ - 1 file changed, 30 insertions(+), 12 deletions(-) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -155,10 +155,20 @@ static const enum gpiod_flags gpio_flags - GPIOD_ASIS, - }; - --#define T_WAIT msecs_to_jiffies(50) --#define T_INIT_JIFFIES msecs_to_jiffies(300) --#define T_RESET_US 10 --#define T_FAULT_RECOVER msecs_to_jiffies(1000) -+/* t_start_up (SFF-8431) or t_init (SFF-8472) is the time required for a -+ * non-cooled module to initialise its laser safety circuitry. We wait -+ * an initial T_WAIT period before we check the tx fault to give any PHY -+ * on board (for a copper SFP) time to initialise. -+ */ -+#define T_WAIT msecs_to_jiffies(50) -+#define T_START_UP msecs_to_jiffies(300) -+#define T_START_UP_BAD_GPON msecs_to_jiffies(60000) -+ -+/* t_reset is the time required to assert the TX_DISABLE signal to reset -+ * an indicated TX_FAULT. -+ */ -+#define T_RESET_US 10 -+#define T_FAULT_RECOVER msecs_to_jiffies(1000) - - /* SFP module presence detection is poor: the three MOD DEF signals are - * the same length on the PCB, which means it's possible for MOD DEF 0 to -@@ -219,6 +229,7 @@ struct sfp { - - struct sfp_eeprom_id id; - unsigned int module_power_mW; -+ unsigned int module_t_start_up; - - #if IS_ENABLED(CONFIG_HWMON) - struct sfp_diag diag; -@@ -1742,6 +1753,12 @@ static int sfp_sm_mod_probe(struct sfp * - if (ret < 0) - return ret; - -+ if (!memcmp(id.base.vendor_name, "ALCATELLUCENT ", 16) && -+ !memcmp(id.base.vendor_pn, "3FE46541AA ", 16)) -+ sfp->module_t_start_up = T_START_UP_BAD_GPON; -+ else -+ sfp->module_t_start_up = T_START_UP; -+ - return 0; - } - -@@ -1947,11 +1964,12 @@ static void sfp_sm_main(struct sfp *sfp, - break; - - if (sfp->state & SFP_F_TX_FAULT) { -- /* Wait t_init before indicating that the link is up, -- * provided the current state indicates no TX_FAULT. If -- * TX_FAULT clears before this time, that's fine too. -+ /* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431) -+ * from the TX_DISABLE deassertion for the module to -+ * initialise, which is indicated by TX_FAULT -+ * deasserting. - */ -- timeout = T_INIT_JIFFIES; -+ timeout = sfp->module_t_start_up; - if (timeout > T_WAIT) - timeout -= T_WAIT; - else -@@ -1968,8 +1986,8 @@ static void sfp_sm_main(struct sfp *sfp, - - case SFP_S_INIT: - if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { -- /* TX_FAULT is still asserted after t_init, so assume -- * there is a fault. -+ /* TX_FAULT is still asserted after t_init or -+ * or t_start_up, so assume there is a fault. - */ - sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, - sfp->sm_retries == 5); -@@ -1988,7 +2006,7 @@ static void sfp_sm_main(struct sfp *sfp, - case SFP_S_INIT_TX_FAULT: - if (event == SFP_E_TIMEOUT) { - sfp_module_tx_fault_reset(sfp); -- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); -+ sfp_sm_next(sfp, SFP_S_INIT, sfp->module_t_start_up); - } - break; - -@@ -2012,7 +2030,7 @@ static void sfp_sm_main(struct sfp *sfp, - case SFP_S_TX_FAULT: - if (event == SFP_E_TIMEOUT) { - sfp_module_tx_fault_reset(sfp); -- sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES); -+ sfp_sm_next(sfp, SFP_S_REINIT, sfp->module_t_start_up); - } - break; - -- cgit v1.2.3