From 8f27ac5ec066e6cc85013eb49150aa5d7144de33 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 13 Sep 2021 14:08:35 +0200 Subject: ipq40xx: 5.10: copy patches Copy over the 5.4 kernel patches to 5.10 folder. Signed-off-by: Robert Marko --- ...ts-qcom-ipq4019-Add-SDHCI-controller-node.patch | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch (limited to 'target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch') diff --git a/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch new file mode 100644 index 0000000000..25fce8daf0 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch @@ -0,0 +1,36 @@ +From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Thu, 15 Aug 2019 19:28:23 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node + +IPQ4019 has a built in SD/eMMC controller which is supported by the +SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding. +So lets add the appropriate node for it. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -206,6 +206,18 @@ + interrupts = ; + }; + ++ sdhci: sdhci@7824900 { ++ compatible = "qcom,sdhci-msm-v4"; ++ reg = <0x7824900 0x11c>, <0x7824000 0x800>; ++ interrupts = , ; ++ interrupt-names = "hc_irq", "pwr_irq"; ++ bus-width = <8>; ++ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, ++ <&gcc GCC_DCD_XO_CLK>; ++ clock-names = "core", "iface", "xo"; ++ status = "disabled"; ++ }; ++ + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; -- cgit v1.2.3