From f70e11cd974effdea1ed2ae0ded3033984ba3dad Mon Sep 17 00:00:00 2001 From: Stefan Lippers-Hollmann Date: Fri, 7 May 2021 01:00:58 +0200 Subject: ipq806x: g10: case-insensitive qcom-smem partitions The out-of-tree qcom-smem patches traditionally displayed mtd partition names in upper case, starting with the new mainline qcom-smem support in kernel v5.10, it switches to normalizing the partition names to lower case. Signed-off-by: Stefan Lippers-Hollmann --- .../base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'target/linux/ipq806x/base-files/etc/hotplug.d') diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a05bd99bc7..3dd7a51d5d 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -10,7 +10,12 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in asrock,g10) - caldata_extract "0:ART" 0x1000 0x2f20 + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x1000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x1000 0x2f20 + fi ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x1000 0x2f20 @@ -59,7 +64,12 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in asrock,g10) - caldata_extract "0:ART" 0x5000 0x2f20 + if [ -b "$(find_mtd_part 0:art)" ]; then + caldata_extract "0:art" 0x5000 0x2f20 + else + # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) + caldata_extract "0:ART" 0x5000 0x2f20 + fi ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x5000 0x2f20 -- cgit v1.2.3