From 78bebe680f67e8967c2baad8a5c07035d431f9d5 Mon Sep 17 00:00:00 2001 From: Yushi Nishida Date: Fri, 3 Apr 2020 19:21:06 +0200 Subject: lantiq/xrx200: add support for the Fritzbox 7360v2 This commit adds support for the Fritzbox 7360v2 CPU: VR9 500MHz Cores: 2 RAM: 128 MB NOR-Flash: 32 MB WLAN: AR9287-BL1A DECT is not working. Thanks Sebastian Ortwein for adding 7360SL. The dts file is derived from avm_fritz7360sl.dts. Firmware can be flashed with this method: 1.) Set your client IP to 192.168.178.2 2.) Power on your your Fritzbox and connect to 192.168.178.1 via ftp in the first 5 seconds. 3.) login with adam2/adam2 4.) type into the ftp prompt: passive binary debug 1 quote MEDIA FLSH // (not FLASH) put openwrt-lantiq-xrx200-avm_fritz7360v2-squashfs-sysupgrade.bin mtd1 // using the correct location for the squashfs-sysupgrade-firmware.bin 5.) wait till red light flashing turns off. 6.) type: exit Run tested with kernel 4.19 and 5.4 on Fritzbox 7360 V2. Issue: Ethernet speed is slow, (iperf between a Xiaomi mir3g and this router results in <80Mbits throughput with a wired cable when using the gbit ports.) Signed-off-by: Yushi Nishida --- .../mips/boot/dts/lantiq/vr9_avm_fritz7360v2.dts | 81 ++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360v2.dts (limited to 'target/linux/lantiq/files-4.19') diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360v2.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360v2.dts new file mode 100644 index 0000000000..215a07e597 --- /dev/null +++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360v2.dts @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "vr9_avm_fritz736x.dtsi" + +#include +#include + +/ { + compatible = "avm,fritz7360v2", "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 7360 V2"; +}; + +&power_green { + label = "fritz7360v2:green:power"; +}; + +&power_red { + label = "fritz7360v2:red:power"; +}; + +&info_green { + label = "fritz7360v2:green:info"; +}; + +&wifi { + label = "fritz7360v2:green:wlan"; +}; + +&info_red { + label = "fritz7360v2:red:info"; +}; + +&dect { + label = "fritz7360v2:green:dect"; +}; + +&state_default { + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; +}; + +&localbus { + flash@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + + partitions { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fixed-partitions"; + + urlader: partition@0 { + label = "urlader"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x1f60000>; + }; + + partition@1f80000 { + label = "tffs (1)"; + reg = <0x1f80000 0x40000>; + read-only; + }; + + partition@1fc0000 { + label = "tffs (2)"; + reg = <0x1fc0000 0x40000>; + read-only; + }; + }; + }; +}; -- cgit v1.2.3