From 21be2c26d555b33e9faf85be3e980876810b29d3 Mon Sep 17 00:00:00 2001
From: Chukun Pan <amadeus@jmu.edu.cn>
Date: Fri, 10 Feb 2023 23:08:25 +0800
Subject: mediatek: add support for TP-Link TL-XDR4288/608x
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: ESMT M15T4G16256A 512MB
Ethernet (Max Speed):
XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan
XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
WiFi:
XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R)
XDR6086/XDR6088:
WiFi1: MT7976GN 2.4GHz 4T4R
WiFi2: MT7976AN 5GHz 4T4R
Button: Reset, WPS, Turbo
USB: 1 x USB 3.0
Power: DC 12V 4A
Flash instructions:
1. Execute the following operation to open nc shell:
https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
2. Replace the stock bootloader to OpenWrt's:
dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
3. Connect to your PC via the Gigabit port of the router,
set a static ip on the ethernet interface of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
4. Download the initramfs image, and restart the router,
waiting for tftp recovery to complete.
5. After openwrt boots up, perform sysupgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
[Add uboot build, fit and sysupgrade support, fix RealTek PHYs]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
target/linux/mediatek/image/filogic.mk | 44 ++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
(limited to 'target/linux/mediatek/image/filogic.mk')
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 3538ec1b86..1259d08152 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -141,6 +141,50 @@ define Device/mediatek_mt7986b-rfb
endef
TARGET_DEVICES += mediatek_mt7986b-rfb
+define Device/tplink_tl-xdr-common
+ DEVICE_VENDOR := TP-Link
+ DEVICE_DTS_DIR := ../dts
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBOOTENV_IN_UBI := 1
+ IMAGES := sysupgrade.itb
+ KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+ KERNEL := kernel-bin | gzip
+ KERNEL_INITRAMFS := kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+ IMAGE/sysupgrade.itb := append-kernel | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
+ ARTIFACTS := preloader.bin bl31-uboot.fip
+ ARTIFACT/preloader.bin := bl2 spim-nand-ddr3
+endef
+
+define Device/tplink_tl-xdr4288
+ DEVICE_MODEL := TL-XDR4288
+ DEVICE_DTS := mt7986a-tplink-tl-xdr4288
+ ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr4288
+ $(call Device/tplink_tl-xdr-common)
+endef
+TARGET_DEVICES += tplink_tl-xdr4288
+
+define Device/tplink_tl-xdr6086
+ DEVICE_MODEL := TL-XDR6086
+ DEVICE_DTS := mt7986a-tplink-tl-xdr6086
+ ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr6086
+ $(call Device/tplink_tl-xdr-common)
+endef
+TARGET_DEVICES += tplink_tl-xdr6086
+
+define Device/tplink_tl-xdr6088
+ DEVICE_MODEL := TL-XDR6088
+ DEVICE_DTS := mt7986a-tplink-tl-xdr6088
+ ARTIFACT/bl31-uboot.fip := bl31-uboot tplink_tl-xdr6088
+ $(call Device/tplink_tl-xdr-common)
+endef
+TARGET_DEVICES += tplink_tl-xdr6088
+
define Device/xiaomi_redmi-router-ax6000-stock
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
--
cgit v1.2.3