From e4bad5f0ac9b8e6602181a51b1f97e39bef0595b Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Wed, 15 Aug 2018 19:47:56 +0200 Subject: kernel: bump kernel 4.14 to version 4.14.63 The following patches were integrated upstream: * target/linux/ipq40xx/patches-4.14/050-0006-mtd-nand-qcom-Add-a-NULL-check-for-devm_kasprintf.patch * target/linux/mediatek/patches-4.14/0177-phy-phy-mtk-tphy-use-auto-instead-of-force-to-bypass.patch This fixes tries to work around the following security problems: * CVE-2018-3620 L1 Terminal Fault OS, SMM related aspects * CVE-2018-3646 L1 Terminal Fault Virtualization related aspects Signed-off-by: Hauke Mehrtens --- ...25-phy-phy-mtk-tphy-add-set_mode-callback.patch | 6 +- ...-tphy-use-auto-instead-of-force-to-bypass.patch | 75 ---------------------- 2 files changed, 3 insertions(+), 78 deletions(-) delete mode 100644 target/linux/mediatek/patches-4.14/0177-phy-phy-mtk-tphy-use-auto-instead-of-force-to-bypass.patch (limited to 'target/linux/mediatek/patches-4.14') diff --git a/target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch b/target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch index a9481f3d6f..9b651925c9 100644 --- a/target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch +++ b/target/linux/mediatek/patches-4.14/0125-phy-phy-mtk-tphy-add-set_mode-callback.patch @@ -26,7 +26,7 @@ Signed-off-by: Kishon Vijay Abraham I #define U3P_U3_CHIP_GPIO_CTLD 0x0c #define P3C_REG_IP_SW_RST BIT(31) -@@ -585,6 +587,31 @@ static void u2_phy_instance_exit(struct +@@ -580,6 +582,31 @@ static void u2_phy_instance_exit(struct } } @@ -58,7 +58,7 @@ Signed-off-by: Kishon Vijay Abraham I static void pcie_phy_instance_init(struct mtk_tphy *tphy, struct mtk_phy_instance *instance) { -@@ -881,6 +908,17 @@ static int mtk_phy_exit(struct phy *phy) +@@ -876,6 +903,17 @@ static int mtk_phy_exit(struct phy *phy) return 0; } @@ -76,7 +76,7 @@ Signed-off-by: Kishon Vijay Abraham I static struct phy *mtk_phy_xlate(struct device *dev, struct of_phandle_args *args) { -@@ -931,6 +969,7 @@ static const struct phy_ops mtk_tphy_ops +@@ -926,6 +964,7 @@ static const struct phy_ops mtk_tphy_ops .exit = mtk_phy_exit, .power_on = mtk_phy_power_on, .power_off = mtk_phy_power_off, diff --git a/target/linux/mediatek/patches-4.14/0177-phy-phy-mtk-tphy-use-auto-instead-of-force-to-bypass.patch b/target/linux/mediatek/patches-4.14/0177-phy-phy-mtk-tphy-use-auto-instead-of-force-to-bypass.patch deleted file mode 100644 index fc993c3266..0000000000 --- a/target/linux/mediatek/patches-4.14/0177-phy-phy-mtk-tphy-use-auto-instead-of-force-to-bypass.patch +++ /dev/null @@ -1,75 +0,0 @@ -From dacdae142ffd909ed6718adb05af74ff800da668 Mon Sep 17 00:00:00 2001 -From: Chunfeng Yun -Date: Thu, 7 Dec 2017 19:53:34 +0800 -Subject: [PATCH 177/224] phy: phy-mtk-tphy: use auto instead of force to - bypass utmi signals - -When system is running, if usb2 phy is forced to bypass utmi signals, -all PLL will be turned off, and it can't detect device connection -anymore, so replace force mode with auto mode which can bypass utmi -signals automatically if no device attached for normal flow. -But keep the force mode to fix RX sensitivity degradation issue. - -Signed-off-by: Chunfeng Yun -Signed-off-by: Kishon Vijay Abraham I ---- - drivers/phy/mediatek/phy-mtk-tphy.c | 19 +++++++------------ - 1 file changed, 7 insertions(+), 12 deletions(-) - ---- a/drivers/phy/mediatek/phy-mtk-tphy.c -+++ b/drivers/phy/mediatek/phy-mtk-tphy.c -@@ -440,9 +440,9 @@ static void u2_phy_instance_init(struct - u32 index = instance->index; - u32 tmp; - -- /* switch to USB function. (system register, force ip into usb mode) */ -+ /* switch to USB function, and enable usb pll */ - tmp = readl(com + U3P_U2PHYDTM0); -- tmp &= ~P2C_FORCE_UART_EN; -+ tmp &= ~(P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM); - tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0); - writel(tmp, com + U3P_U2PHYDTM0); - -@@ -502,10 +502,8 @@ static void u2_phy_instance_power_on(str - u32 index = instance->index; - u32 tmp; - -- /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */ - tmp = readl(com + U3P_U2PHYDTM0); -- tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL); -- tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK); -+ tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK); - writel(tmp, com + U3P_U2PHYDTM0); - - /* OTG Enable */ -@@ -540,7 +538,6 @@ static void u2_phy_instance_power_off(st - - tmp = readl(com + U3P_U2PHYDTM0); - tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN); -- tmp |= P2C_FORCE_SUSPENDM; - writel(tmp, com + U3P_U2PHYDTM0); - - /* OTG Disable */ -@@ -548,18 +545,16 @@ static void u2_phy_instance_power_off(st - tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN; - writel(tmp, com + U3P_USBPHYACR6); - -- /* let suspendm=0, set utmi into analog power down */ -- tmp = readl(com + U3P_U2PHYDTM0); -- tmp &= ~P2C_RG_SUSPENDM; -- writel(tmp, com + U3P_U2PHYDTM0); -- udelay(1); -- - tmp = readl(com + U3P_U2PHYDTM1); - tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID); - tmp |= P2C_RG_SESSEND; - writel(tmp, com + U3P_U2PHYDTM1); - - if (tphy->pdata->avoid_rx_sen_degradation && index) { -+ tmp = readl(com + U3P_U2PHYDTM0); -+ tmp &= ~(P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM); -+ writel(tmp, com + U3P_U2PHYDTM0); -+ - tmp = readl(com + U3D_U2PHYDCR0); - tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; - writel(tmp, com + U3D_U2PHYDCR0); -- cgit v1.2.3