From b7ec6659a14d1a11e52b56235274b3e46d22e331 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Sun, 18 Aug 2019 14:50:20 +0900 Subject: ramips: add support for ipTIME A3 ipTIME A3 is a 2.4/5GHz band AC1200 router, based on MediaTek MT7628AN. Specifications: - SoC: MT7628AN - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7612EN - Ethernet: 3x 10/100Mbps - Switch: SoC internal - UART: - J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo --- target/linux/ramips/base-files/etc/board.d/02_network | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'target/linux/ramips/base-files/etc/board.d') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 8af534dbc2..49284f562d 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -376,6 +376,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch1" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; + iptime,a3) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "0:wan" "6@eth0" + ;; lava,lr-25g001|\ sitecom,wlr-6000|\ trendnet,tew-691gr|\ @@ -666,6 +670,7 @@ ramips_setup_macs() trendnet,tew-692gr) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) ;; + iptime,a3|\ iptime,a604m) wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) ;; -- cgit v1.2.3