From d8dd207ea6f299cfcaef4899f1cade375e694dd5 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Mon, 7 Nov 2016 22:02:20 +0100 Subject: ramips: use the ralink,mtd-eeprom device tree property Use the ralink,mtd-eeprom instead of invoking the userspace firmware loader. Set the label and compatible string according to the the PCI binding documentation. Use the wifi@0,0 label and the pci0,0 compatible string in case the PCI vendor and device id is unknown. It should work anyway since the compatible string isn't evaluated (yet). This commit might fixes the PCIe wireless for the Buffalo WHR-600D. This board was mentioned in the board 10-rt2x00-eeprom firmware hotplug script but never had the correct eeprom name set to trigger the firmware from flash extraction. Use the usual eeprom for the soc wmac of the Dovado Tiny AC. Signed-off-by: Mathias Kresin --- .../base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) (limited to 'target/linux/ramips/base-files/etc') diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 4c8beac066..b44bae90bb 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -43,25 +43,14 @@ board=$(ramips_board_name) case "$FIRMWARE" in "soc_wmac.eeprom") case $board in - *) - rt2x00_eeprom_die "Please define mtd-eeprom in $board DTS file!" - ;; - esac - ;; - -"rt2x00pci_1_0.eeprom") - case $board in - cy-swr1100) - rt2x00_eeprom_extract "factory" 8192 512 - ;; - br-6475nd | rt-n56u | whr-600d | whr-1166d) - rt2x00_eeprom_extract "factory" 32768 512 - ;; tiny-ac) wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR) rt2x00_eeprom_extract "factory" 0 512 rt2x00_eeprom_set_macaddr $wifi_mac ;; + *) + rt2x00_eeprom_die "Please define mtd-eeprom in $board DTS file!" + ;; esac ;; esac -- cgit v1.2.3