From dbdc26ba33c19274e54b92e273073117b9e89ccb Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Thu, 8 Mar 2018 15:49:00 +0900 Subject: ramips: fix switch for Nexx devices There are 2 ethernet ports on Nexx WT1520 and WT3020. These ethernet ports are assigned as follows, and other ports cannot be used. - WT1520: - port0 -> lan - port4 -> wan - WT3020: - port0 -> wan - port4 -> lan I dropped ports that cannot be used. Signed-off-by: INAGAKI Hiroshi --- target/linux/ramips/base-files/etc/board.d/02_network | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'target/linux/ramips/base-files/etc') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f95f24c6c2..20ecf1ab76 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -112,8 +112,6 @@ ramips_setup_interfaces() witi|\ wl-wn575a3|\ wndr3700v5|\ - wt1520-4M|\ - wt1520-8M|\ youku-yk1|\ zbt-ape522ii|\ zbt-we1326|\ @@ -209,8 +207,6 @@ ramips_setup_interfaces() wrtnode|\ wrtnode2p | \ wrtnode2r | \ - wt3020-4M|\ - wt3020-8M|\ zbt-wa05) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" @@ -323,7 +319,9 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; - vonets,var11n-300) + vonets,var11n-300|\ + wt1520-4M|\ + wt1520-8M) ucidef_add_switch "switch0" \ "0:lan" "4:wan" "6@eth0" ;; @@ -356,6 +354,11 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "0:wan" "6@eth0" ;; + wt3020-4M|\ + wt3020-8M) + ucidef_add_switch "switch0" \ + "4:lan" "0:wan" "6@eth0" + ;; zbtlink,zbt-we1226|\ y1) ucidef_add_switch "switch0" \ -- cgit v1.2.3