From 48047b3a5c6aa9fff89a7a9c7ec76d8335b1a8e7 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 3 Jul 2019 23:22:25 +0200 Subject: ramips/mt7620: Name DTS files based on scheme As introduced with ath79, DTS files for ramips will now be labelled soc_vendor_device.dts(i). With this change, DTS files can be selected automatically without further manual links. Signed-off-by: Adrian Schmutzler --- target/linux/ramips/dts/PSG1218B.dts | 50 ------------------------------------ 1 file changed, 50 deletions(-) delete mode 100644 target/linux/ramips/dts/PSG1218B.dts (limited to 'target/linux/ramips/dts/PSG1218B.dts') diff --git a/target/linux/ramips/dts/PSG1218B.dts b/target/linux/ramips/dts/PSG1218B.dts deleted file mode 100644 index f6445e8c44..0000000000 --- a/target/linux/ramips/dts/PSG1218B.dts +++ /dev/null @@ -1,50 +0,0 @@ -/dts-v1/; - -#include "PSG1218.dtsi" - -/ { - compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc"; - model = "Phicomm PSG1218 rev.B"; - - aliases { - led-boot = &led_blue; - led-failsafe = &led_blue; - led-running = &led_blue; - led-upgrade = &led_blue; - }; - - leds { - compatible = "gpio-leds"; - led_blue: blue { - label = "psg1218b:blue:status"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - yellow { - label = "psg1218b:yellow:status"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - red { - label = "psg1218b:red:status"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; -}; -- cgit v1.2.3