From 48047b3a5c6aa9fff89a7a9c7ec76d8335b1a8e7 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 3 Jul 2019 23:22:25 +0200 Subject: ramips/mt7620: Name DTS files based on scheme As introduced with ath79, DTS files for ramips will now be labelled soc_vendor_device.dts(i). With this change, DTS files can be selected automatically without further manual links. Signed-off-by: Adrian Schmutzler --- .../linux/ramips/dts/mt7620a_phicomm_psg1218b.dts | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts (limited to 'target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts') diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts b/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts new file mode 100644 index 0000000000..0f38b4fc57 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts @@ -0,0 +1,50 @@ +/dts-v1/; + +#include "mt7620a_phicomm_psg1218.dtsi" + +/ { + compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc"; + model = "Phicomm PSG1218 rev.B"; + + aliases { + led-boot = &led_blue; + led-failsafe = &led_blue; + led-running = &led_blue; + led-upgrade = &led_blue; + }; + + leds { + compatible = "gpio-leds"; + led_blue: blue { + label = "psg1218b:blue:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + yellow { + label = "psg1218b:yellow:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + red { + label = "psg1218b:red:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; +}; -- cgit v1.2.3