From 6d4382711a65b5606cc9b815e6590b0e36ebf5b5 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Tue, 8 Dec 2020 15:05:47 +0100 Subject: ramips: use full names for Xiaomi Mi Router devices This aligns the device/image names of the older Xiaomi Mi Router devices with their "friendly" model and DEVICE_MODEL properties. This also reintroduces consistency with the newer devices already following that scheme. Signed-off-by: Adrian Schmutzler --- .../dts/mt7628an_xiaomi_mi-router-4a-100m.dts | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m.dts (limited to 'target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m.dts') diff --git a/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m.dts b/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m.dts new file mode 100644 index 0000000000..37797fc368 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4a-100m.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_xiaomi_mi-router-4.dtsi" + +/ { + compatible = "xiaomi,mi-router-4a-100m", "mediatek,mt7628an-soc"; + model = "Xiaomi Mi Router 4A (100M Edition)"; +}; + +&partitions { + partition@60000 { + label = "overlay"; + reg = <0x60000 0x100000>; + read-only; + }; + + partition@160000 { + label = "firmware"; + reg = <0x160000 0xea0000>; + compatible = "denx,uimage"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mtd-mac-address-increment = <(-1)>; +}; + +&esw { + mediatek,portmap = <0x3e>; + mediatek,portdisable = <0x2a>; +}; -- cgit v1.2.3