From b97a99256fe54e81c8fc6c60183f46fbf731bbf8 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 3 Jul 2019 23:22:31 +0200 Subject: ramips/mt76x8: Name DTS files based on scheme Signed-off-by: Adrian Schmutzler --- .../dts/mt7628an_zyxel_keenetic-extra-ii.dts | 216 +++++++++++++++++++++ 1 file changed, 216 insertions(+) create mode 100644 target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts (limited to 'target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts') diff --git a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts new file mode 100644 index 0000000000..56912a786e --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts @@ -0,0 +1,216 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc"; + model = "ZyXEL Keenetic Extra II"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600n8"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + fn { + label = "fn"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "keenetic-extra-ii:green:power"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + internet { + label = "keenetic-extra-ii:green:internet"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "keenetic-extra-ii:green:wifi"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "keenetic-extra-ii:green:usb"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "rf-eeprom"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xe90000>; + }; + + partition@ee0000 { + label = "config_1"; + reg = <0xee0000 0x10000>; + read-only; + }; + + partition@ef0000 { + label = "storage"; + reg = <0xef0000 0x100000>; + read-only; + }; + + partition@ff0000 { + label = "dump"; + reg = <0xff0000 0x10000>; + read-only; + }; + + partition@1000000 { + label = "u-state"; + reg = <0x1000000 0x30000>; + read-only; + }; + + partition@1030000 { + label = "u-config_res"; + reg = <0x1030000 0x10000>; + read-only; + }; + + partition@1040000 { + label = "rf-eeprom_res"; + reg = <0x1040000 0x10000>; + read-only; + }; + + partition@1050000 { + label = "firmware_2"; + reg = <0x1050000 0xe90000>; + read-only; + }; + + partition@1ee0000 { + label = "config_2"; + reg = <0x1ee0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + status = "okay"; + mediatek,mtd-eeprom = <&factory 0x0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&factory 0x8004>; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; -- cgit v1.2.3