From 3501db9b9b4a71ae52c539b46af817783c327866 Mon Sep 17 00:00:00 2001 From: "Leon M. George" Date: Thu, 24 Dec 2020 11:32:47 +0100 Subject: ramips: add support for cudy WR2100 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Specifications SoC: MT7621 CPU: 880 MHz Flash: 16 MiB RAM: 128 MiB WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac MT7603E / MT7615E Ethernet: 5x Gbit ports Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. R4 & R5 need to be shorted (0-100Ω) for the UART to work. Signed-off-by: Leon M. George [remove non-required switch-port node - remove trgmii phy-mode] Signed-off-by: David Bauer --- target/linux/ramips/image/mt7621.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'target/linux/ramips/image/mt7621.mk') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 9ff066c8c3..1ae49cb96e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -240,6 +240,16 @@ define Device/cudy_wr1300 endef TARGET_DEVICES += cudy_wr1300 +define Device/cudy_wr2100 + $(Device/dsa-migration) + DEVICE_VENDOR := Cudy + DEVICE_MODEL := WR2100 + IMAGE_SIZE := 15872k + UIMAGE_NAME := R11 + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware +endef +TARGET_DEVICES += cudy_wr2100 + define Device/dlink_dir-8xx-a1 $(Device/dsa-migration) IMAGE_SIZE := 16000k -- cgit v1.2.3