From 8f6334eb947a2594da8a2b58cf7afdabb83fb5a0 Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Fri, 10 Apr 2020 12:32:42 +0800 Subject: ramips: explicitly disable built-in switch when needed previously we rely on the failsafe setup in preinit scripts to disable built-in switch implicitly for single-port devices. This doesn't work anymore due to preinit script removal. this patch explicitly disable built-in switch for needed devices. Fixes: a8d62a4eb1 ("ramips: remove set_preinit_iface script") Signed-off-by: Chuanhong Guo --- .../ramips/mt76x8/base-files/etc/board.d/02_network | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) (limited to 'target/linux/ramips/mt76x8') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 5230717506..a6543fd38f 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -11,11 +11,19 @@ ramips_setup_interfaces() case $board in alfa-network,awusfree1|\ d-team,pbr-d1|\ + mediatek,linkit-smart-7688|\ + onion,omega2p|\ + onion,omega2|\ tama,w06|\ tplink,re200-v2|\ tplink,re305-v1|\ tplink,tl-mr3020-v3|\ - tplink,tl-wr802n-v4) + tplink,tl-wr802n-v4|\ + tplink,tl-wa801nd-v5|\ + widora,neo-16m|\ + widora,neo-32m) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" ucidef_set_interface_lan "eth0" ;; buffalo,wcr-1166ds) @@ -81,16 +89,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; - mediatek,linkit-smart-7688|\ - onion,omega2p|\ - onion,omega2|\ - tplink,tl-wa801nd-v5|\ - widora,neo-16m|\ - widora,neo-32m) - ucidef_add_switch "switch0" - ucidef_add_switch_attr "switch0" "enable" "false" - ucidef_set_interface_lan "eth0" - ;; netgear,r6120) ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" -- cgit v1.2.3