From 1d3e71bd9710593cc0d7216b0ce9898b8e89aeef Mon Sep 17 00:00:00 2001 From: Nick Hainke Date: Thu, 4 May 2023 21:13:33 +0200 Subject: treewide: remove files for building 5.10 kernel All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke --- .../801-DT-Add-documentation-for-gpio-ralink.patch | 59 ---------------------- 1 file changed, 59 deletions(-) delete mode 100644 target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch (limited to 'target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch') diff --git a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch deleted file mode 100644 index 93dabf8776..0000000000 --- a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch +++ /dev/null @@ -1,59 +0,0 @@ -From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 28 Jul 2013 19:45:30 +0200 -Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink - -Describe gpio-ralink binding. - -Signed-off-by: John Crispin -Cc: linux-mips@linux-mips.org -Cc: devicetree@vger.kernel.org -Cc: linux-gpio@vger.kernel.org ---- - .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++ - 1 file changed, 40 insertions(+) - create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -@@ -0,0 +1,40 @@ -+Ralink SoC GPIO controller bindings -+ -+Required properties: -+- compatible: -+ - "ralink,rt2880-gpio" for Ralink controllers -+- #gpio-cells : Should be two. -+ - first cell is the pin number -+ - second cell is used to specify optional parameters (unused) -+- gpio-controller : Marks the device node as a GPIO controller -+- reg : Physical base address and length of the controller's registers -+- interrupt-parent: phandle to the INTC device node -+- interrupts : Specify the INTC interrupt number -+- ngpios : Specify the number of GPIOs -+- ralink,register-map : The register layout depends on the GPIO bank and actual -+ SoC type. Register offsets need to be in this order. -+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ] -+ -+Optional properties: -+- ralink,gpio-base : Specify the GPIO chips base number -+ -+Example: -+ -+ gpio0: gpio@600 { -+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; -+ -+ #gpio-cells = <2>; -+ gpio-controller; -+ -+ reg = <0x600 0x34>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <6>; -+ -+ ngpios = <24>; -+ ralink,gpio-base = <0>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ -+ }; -- cgit v1.2.3