From 045fe28d4ee5d9f580add6c0669d612f7c2a6339 Mon Sep 17 00:00:00 2001 From: Stijn Tintel Date: Tue, 17 May 2022 17:57:07 +0300 Subject: ramips: use hotplug script for EAP615-Wall MACs Using nvmem-cells to set the MAC address for a DBDC device results in both PHY devices using the same MAC address. This in turn will result in multiple BSSes using the same BSSID, which can cause various problems. Use the hotplug script for the EAP615-Wall instead to avoid this. Fixes: a1b8a4d7b3ff ("ramips: support TP-Link EAP615-Wall") Signed-off-by: Stijn Tintel Tested-by: Stijn Segers Tested-By: Andrew Powers-Holmes (cherry picked from commit ce90ba1f3168e3f4581fd8581e2c0cd31efa14cf) --- target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts | 2 -- .../ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 ++++ 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'target/linux/ramips') diff --git a/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts b/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts index a0c3912d8e..0be4af39e8 100644 --- a/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts +++ b/target/linux/ramips/dts/mt7621_tplink_eap615-wall-v1.dts @@ -144,8 +144,6 @@ compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&radio 0x0>; - nvmem-cells = <&macaddr_info_8>; - nvmem-cell-names = "mac-address"; }; }; diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index fae181cfed..627869b8db 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -83,6 +83,10 @@ case "$board" in hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress ;; + tplink,eap615-wall-v1) + hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)" + macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress" + ;; yuncore,ax820) [ "$PHYNBR" = "1" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress -- cgit v1.2.3