From e6d9f6fdffc6730cfa2019788afa411828eac816 Mon Sep 17 00:00:00 2001 From: Jayantajit Gogoi Date: Mon, 12 Oct 2020 18:51:34 +0000 Subject: sunxi: add support for FriendlyARM NanoPi R1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Specification: - CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz - DDR3 RAM: 512MB/1GB - Network: 10/100/1000M Ethernet x 1， 10/100M Ethernet x 1 - WiFi: 802.11b/g/n, with SMA antenna interface - USB Host: Type-A x2 - MicroSD Slot x 1 - MicroUSB: for OTG and power input - Debug Serial Port: 3Pin 2.54mm pitch pin-header - LED: nanopi:red:status nanopi:green:wan nanopi:green:lan - KEY: reset - Power Supply: DC 5V/2A Installation: - Write the image to SD Card with dd - Boot NanoPi from the SD Card Signed-off-by: Jayantajit Gogoi --- target/linux/sunxi/base-files/etc/board.d/01_leds | 20 ++++++++++++++++++++ target/linux/sunxi/base-files/etc/board.d/02_network | 3 +++ 2 files changed, 23 insertions(+) create mode 100644 target/linux/sunxi/base-files/etc/board.d/01_leds (limited to 'target/linux/sunxi/base-files') diff --git a/target/linux/sunxi/base-files/etc/board.d/01_leds b/target/linux/sunxi/base-files/etc/board.d/01_leds new file mode 100644 index 0000000000..514b8d1796 --- /dev/null +++ b/target/linux/sunxi/base-files/etc/board.d/01_leds @@ -0,0 +1,20 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +case $board in +friendlyarm,nanopi-r1) + ucidef_set_led_netdev "wan" "WAN" "nanopi:green:wan" "eth0" + ucidef_set_led_netdev "lan" "LAN" "nanopi:green:lan" "eth1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/sunxi/base-files/etc/board.d/02_network b/target/linux/sunxi/base-files/etc/board.d/02_network index 5cf000cccf..08d31caadc 100755 --- a/target/linux/sunxi/base-files/etc/board.d/02_network +++ b/target/linux/sunxi/base-files/etc/board.d/02_network @@ -8,6 +8,9 @@ board_config_update case $(board_name) in +friendlyarm,nanopi-r1) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + ;; lamobo,lamobo-r1) ucidef_add_switch "switch0" \ "4:lan:1" "0:lan:2" "1:lan:3" "2:lan:4" "3:wan" "8@eth0" -- cgit v1.2.3