From f10f009609aac0941d750ae3a1106675e6d6656a Mon Sep 17 00:00:00 2001 From: Zoltan Herpai Date: Wed, 27 Aug 2014 12:09:46 +0000 Subject: sunxi: initial 3.14 patchset Signed-off-by: Zoltan HERPAI SVN-Revision: 42313 --- .../126-dt-sun7i-add-eth-alias-for-gmac.patch | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch (limited to 'target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch') diff --git a/target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch b/target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch new file mode 100644 index 0000000000..0fe2087ebc --- /dev/null +++ b/target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch @@ -0,0 +1,31 @@ +From 614b4b996be81daca9d8333e1ac163d23e1701c4 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Mon, 10 Feb 2014 18:35:54 +0800 +Subject: [PATCH] ARM: dts: sun7i: Add ethernet alias for GMAC + +All Allwinner A20 boards we support can only use either EMAC or GMAC, +as they share the same pins. As we have switched all supported to +GMAC, we should alias GMAC (the active controller) as ethernet0, +so u-boot will insert the MAC address for the correct controller. + +Signed-off-by: Chen-Yu Tsai +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 679dc50..bfc3a95 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -17,7 +17,7 @@ + interrupt-parent = <&gic>; + + aliases { +- ethernet0 = &emac; ++ ethernet0 = &gmac; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; +-- +2.0.3 + -- cgit v1.2.3