From 337e942290fa6a18e0289ae32420c5c402aead1a Mon Sep 17 00:00:00 2001
From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Sat, 5 Feb 2022 19:09:11 +0900
Subject: ramips: add support for ELECOM WRC-2533GS2
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

ELECOM WRC-2533GS2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.

Specification:

- SoC		: MediaTek MT7621A
- RAM		: DDR3 128 MiB (NT5CC64M16GP-DI)
- Flash		: SPI-NOR 16 MiB (MX25L12835FM2I-10G)
- WLAN		: 2.4/5GHz 4T4R (2x MediaTek MT7615)
- Ethernet	: 10/100/1000 Mbps x5
  - Switch	: MediaTek MT7530 (SoC)
- LEDs/Keys	: 4x/6x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J4: 3.3V, GND, TX, RX from ethernet port side
  - 57600n8
- Power		: 12 VDC, 1.5 A

Flash instruction using factory image:

1. Boot WRC-2533GS2 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

MAC Addresses:

LAN	: 04:AB:18:xx:xx:FB (Factory, 0xFFF4 (hex))
WAN	: 04:AB:18:xx:xx:FC (Factory, 0xFFFA (hex))
2.4 GHz	: 04:AB:18:xx:xx:FD (Factory, 0x4    (hex))
5 GHz	: 04:AB:18:xx:xx:FE (Factory, 0x8004 (hex))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
---
 .../linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts | 64 ++++++++++++++++++++++
 target/linux/ramips/image/mt7621.mk                |  8 +++
 2 files changed, 72 insertions(+)
 create mode 100644 target/linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts

(limited to 'target/linux')

diff --git a/target/linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts b/target/linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts
new file mode 100644
index 0000000000..0036b52032
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_elecom_wrc-gs-2pci.dtsi"
+
+/ {
+	compatible = "elecom,wrc-2533gs2", "mediatek,mt7621-soc";
+	model = "ELECOM WRC-2533GS2";
+};
+
+&partitions {
+	partition@50000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0x50000 0xb00000>;
+	};
+
+	partition@b50000 {
+		label = "tm_pattern";
+		reg = <0xb50000 0x380000>;
+		read-only;
+	};
+
+	partition@ed0000 {
+		label = "tm_key";
+		reg = <0xed0000 0x80000>;
+		read-only;
+	};
+
+	partition@f50000 {
+		label = "nvram";
+		reg = <0xf50000 0x30000>;
+		read-only;
+	};
+
+	partition@f80000 {
+		label = "user_data";
+		reg = <0xf80000 0x80000>;
+		read-only;
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_factory_fff4>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wan {
+	nvmem-cells = <&macaddr_factory_fffa>;
+	nvmem-cell-names = "mac-address";
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_fff4: macaddr@fff4 {
+		reg = <0xfff4 0x6>;
+	};
+
+	macaddr_factory_fffa: macaddr@fffa {
+		reg = <0xfffa 0x6>;
+	};
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 105f1f5b18..8e13920672 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -549,6 +549,14 @@ define Device/elecom_wrc-2533ghbk-i
 endef
 TARGET_DEVICES += elecom_wrc-2533ghbk-i
 
+define Device/elecom_wrc-2533gs2
+  $(Device/elecom_wrc-gs)
+  IMAGE_SIZE := 11264k
+  DEVICE_MODEL := WRC-2533GS2
+  ELECOM_HWNAME := WRC-2533GS2
+endef
+TARGET_DEVICES += elecom_wrc-2533gs2
+
 define Device/elecom_wrc-2533gst
   $(Device/elecom_wrc-gs)
   IMAGE_SIZE := 11264k
-- 
cgit v1.2.3