From 9b02e73188158829d48835906edbb8702fd95e28 Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Thu, 3 Dec 2015 17:30:24 +0000 Subject: board.d: merge ucidef_add_switch() and ucidef_add_switch_ports() This changes uci-defaults-new.sh, config_generate and all relevant board.d files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into a single function. Also removes now superfluous enable and reset arguments. Signed-off-by: Jo-Philipp Wich SVN-Revision: 47721 --- .../linux/ar71xx/base-files/etc/board.d/02_network | 131 +++++++-------------- .../bcm53xx/base-files/etc/board.d/02_network | 11 +- .../mpc85xx/base-files/etc/board.d/02_network | 3 +- .../linux/mvebu/base-files/etc/board.d/02_network | 3 +- .../linux/ramips/base-files/etc/board.d/02_network | 60 ++++------ 5 files changed, 71 insertions(+), 137 deletions(-) (limited to 'target/linux') diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 707f7d6798..b88b6bb046 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -25,24 +25,21 @@ ubnt-unifi-outdoor) ap132 |\ wlr8100) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" ;; esr1750 |\ epg5000) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; ap136-010 |\ ap147-010) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" ;; @@ -51,8 +48,7 @@ ap135-020 |\ tl-wr1043nd-v2 |\ wzr-450hp2) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0" ;; @@ -60,30 +56,26 @@ archer-c5 |\ archer-c7 |\ tl-wdr4900-v2) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" ;; bsb) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "3:lan" # XXX: confirm cpu port! ucidef_set_interface_wlan ;; cpe510) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "5:lan" "4:wan" ;; airgatewaypro) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "4:lan" "5:wan" ;; @@ -94,52 +86,46 @@ rb-2011uias |\ rb-2011uas-2hnd|\ rb-2011uias-2hnd) ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" case "$board" in rb-2011uas* | rb-2011uias | rb-2011uias-2hnd) - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp" ;; *) - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" ;; esac - ucidef_add_switch "switch1" "1" "1" - ucidef_add_switch_ports "switch1" \ + ucidef_add_switch "switch1" \ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" ;; dir-825-b1|\ tew-673gru) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" ;; f9k1115v2) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" \ "0@eth0" "1:wan" # XXX: confirm cpu ports! ;; nbg460n_550n_550nh) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" ;; nbg6616 |\ nbg6716) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" \ "5:wan" "6@eth1" ;; @@ -148,30 +134,26 @@ ap143 |\ rb-433 |\ rb-433u) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "5@eth1" ;; rb-435g) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "2:lan" # XXX: confirm! ;; rb-450) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth1" ;; rb-450g |\ routerstation-pro) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1" ;; @@ -181,8 +163,7 @@ rb-751g |\ rb-951g-2hnd |\ wzr-hp-g450h) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" ;; @@ -192,11 +173,9 @@ rb-951ui-2hnd) rb-493g) ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" - ucidef_add_switch "switch1" "1" "1" - ucidef_add_switch_ports "switch1" \ + ucidef_add_switch "switch1" \ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" ;; @@ -204,37 +183,32 @@ wzr-hp-g300nh2 |\ pb92 |\ ap113) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan" ;; el-m150) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "3@eth1" # XXX: confirm! ;; tl-wdr4300|\ tl-wr1041n-v2) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; tl-wr1043nd) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" ;; tl-wr2543n) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" ;; @@ -259,36 +233,31 @@ wnr2200 |\ wnr612-v2 |\ wnr1000-v2) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1" # XXX: confirm! ;; uap-pro) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:wan" ;; nanostation-m-xw) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "5:lan" "1:wan" ;; wrt160nl) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0" ;; wzr-hp-g300nh) ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" ;; @@ -296,8 +265,7 @@ dgl-5500-a1 |\ dir-825-c1) local mac ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" mac=$(mtd_get_mac_ascii nvram "wan_mac") [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac" @@ -306,8 +274,7 @@ dir-825-c1) mynet-n750) local mac ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" mac=$(mtd_get_mac_ascii devdata "wanmac") [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac" @@ -322,8 +289,7 @@ dir-835-a1 |\ wndr3700v4 | \ wndr4300) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" mac_lan=$(mtd_get_mac_binary caldata 0) [ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan" @@ -334,8 +300,7 @@ wndr4300) esr900) local mac ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac" @@ -425,15 +390,13 @@ wpe72) gl-ar300) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" ;; wpj344) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "3:lan" "2:wan" ;; @@ -443,8 +406,7 @@ wpj531) wpj558) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "5:lan" "1:wan" "6@eth0" ;; @@ -482,35 +444,30 @@ whr-hp-g300n |\ whr-hp-gn |\ wzr-hp-ag300h) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" ;; wzr-hp-g450h) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan" ;; ew-dorin) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:wan" ;; ew-dorin-router) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" "0@eth0" "2:lan" "3:lan" + ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:lan" ;; wndr3700) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index 338e71134c..5abb0610df 100755 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -29,12 +29,11 @@ esac ucidef_set_interface_loopback ucidef_set_interfaces_lan_wan "$ifname.1" "$ifname.2" -ucidef_add_switch "switch0" "1" "1" # Workaround for devices using CPU port 8 (connected to eth2) case "$board" in netgear,r8000) - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname" board_config_flush exit 0 @@ -50,18 +49,18 @@ vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))" vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))" if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \ echo "$vlan2ports" | egrep -q "^0 5"; then - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5t@$ifname" elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \ echo "$vlan2ports" | egrep -q "^0 7"; then - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "7t@$ifname" elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \ echo "$vlan2ports" | egrep -q "^4 8"; then - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5:lan" "7:lan" "4:wan" "8t@$ifname" else - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname" fi diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network index af2c1e05b2..5aab17c0a2 100755 --- a/target/linux/mpc85xx/base-files/etc/board.d/02_network +++ b/target/linux/mpc85xx/base-files/etc/board.d/02_network @@ -15,8 +15,7 @@ board=$(mpc85xx_board_name) case "$board" in tl-wdr4900-v1) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" ;; *) diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network index b07091d74f..20cc3f5ccf 100755 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/base-files/etc/board.d/02_network @@ -24,8 +24,7 @@ armada-385-linksys-shelby) ;; armada-xp-linksys-mamba) ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1" ;; armada-385-db-ap) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index c8bdc77a69..3cfb6bac66 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -25,8 +25,7 @@ ramips_setup_rt3x5x_vlans() fi done ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "rt305x" "1" "1" - ucidef_add_switch_ports "rt305x" $lanports $wanports "6@eth0" + ucidef_add_switch "rt305x" $lanports $wanports "6@eth0" } ramips_setup_interfaces() @@ -88,14 +87,12 @@ ramips_setup_interfaces() zbt-wg2626|\ youku-yk1) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; a5-v11) ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "6t@eth0" ;; ar670w|\ @@ -103,16 +100,14 @@ ramips_setup_interfaces() rt-n15|\ wl-351) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" ;; asl26555|\ re6500|\ rp-n53) ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" ;; atp-52b|\ @@ -129,14 +124,12 @@ ramips_setup_interfaces() wt3020|\ zbt-wa05) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" ;; awapn2403) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:wan" "6@eth0" ;; b2c|\ @@ -150,20 +143,17 @@ ramips_setup_interfaces() ;; br-6475nd) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" ;; cf-wr800n) ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "4:lan" "6t@eth0" ;; cy-swr1100) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0" ;; d105|\ @@ -175,15 +165,13 @@ ramips_setup_interfaces() e1700|\ mt7620a_mt7530) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch1" "1" "1" - ucidef_add_switch_ports "switch1" \ + ucidef_add_switch "switch1" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; hc5*61|\ y1s) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0" ;; m2m) @@ -200,52 +188,44 @@ ramips_setup_interfaces() mzk-dp150n|\ vocore) ucidef_set_interface_lan "eth0.1" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "4:lan" "6t@eth0" ;; rt-n56u) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" ;; tew-691gr|\ tew-692gr) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; v11st-fe|\ wzr-agl300nh) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" ;; wcr-150gn) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "6t@eth0" ;; whr-1166d) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0" ;; wizfi630a) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "1:lan" "2:lan" "0:wan" "6@eth0" ;; zbt-wr8305rt) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_ports "switch0" \ + ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; *) -- cgit v1.2.3