From b1e8a390ea7bde59eb47bdd729228cb377aa6f6f Mon Sep 17 00:00:00 2001 From: Lech Perczak Date: Sun, 8 Dec 2019 15:23:54 +0100 Subject: ath79: restore gpio-export on TL-WDR3600/4300 This partially reverts commit 32144ba275d163ce6e7d93546ab4414f03f508fb. This commit replaced gpio-exports in favor of gpio-hogs for enabling USB power at boot, but this rids the user of control of the USB port power present on this device for a long time. It was agreed on a mailing list [1] that this is not the way to go, and this patch breaks a very common use-case of WWAN modem reset by power cycle, used on a lot USB equipped routers, hence revert this change until a better solution can be found. [1] http://lists.infradead.org/pipermail/openwrt-devel/2019-November/020151.html Tested-by: Sungbo Eo Signed-off-by: Lech Perczak [adjusted commit title] Signed-off-by: Adrian Schmutzler --- .../linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi | 58 +++++++++++----------- 1 file changed, 28 insertions(+), 30 deletions(-) (limited to 'target/linux') diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi index 9ca96cc7cd..7071d35e24 100644 --- a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi +++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi @@ -6,6 +6,34 @@ aliases { label-mac-device = &ath9k; }; + + gpio-export { + compatible = "gpio-export"; + + gpio_usb1_power { + gpio-export,name = "tp-link:power:usb1"; + gpio-export,output = <1>; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + + gpio_usb2_power { + gpio-export,name = "tp-link:power:usb2"; + gpio-export,output = <1>; + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + + gpio_ext_lna0 { + gpio-export,name = "tp-link:ext:lna0"; + gpio-export,output = <1>; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + }; + + gpio_ext_lna1 { + gpio-export,name = "tp-link:ext:lna1"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; }; &leds { @@ -24,36 +52,6 @@ }; }; -&gpio { - lna0 { - gpio-hog; - gpios = <18 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "tp-link:ext:lna0"; - }; - - lna1 { - gpio-hog; - gpios = <19 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "tp-link:ext:lna1"; - }; - - usb1_power { - gpio-hog; - gpios = <22 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "tp-link:power:usb1"; - }; - - usb2_power { - gpio-hog; - gpios = <21 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "tp-link:power:usb2"; - }; -}; - &usb { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3