From 1fa04b5d9fb1cba56a8597d6da9e1d52b8030f6b Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sat, 18 Jan 2020 02:21:13 +0100 Subject: mvebu: split base-files across subtargets For the mvebu target in particular, there is a lot of files in base-files that are only relevant for one subtarget. Improve overview and reduce size per subtarget by moving/splitting base-files depending on the subtarget they belong to. While at it, consolidate 01_leds by using the model part of the board name as variable. Signed-off-by: Adrian Schmutzler Acked-by: Tomasz Maciej Nowak --- target/linux/mvebu/base-files/etc/board.d/01_leds | 55 -------- .../linux/mvebu/base-files/etc/board.d/02_network | 78 ----------- target/linux/mvebu/base-files/etc/init.d/bootcount | 16 --- .../mvebu/base-files/etc/uci-defaults/03_wireless | 56 -------- .../mvebu/base-files/etc/uci-defaults/04_mambafan | 23 --- .../mvebu/base-files/lib/preinit/06_set_iface_mac | 46 ------ .../mvebu/base-files/lib/preinit/81_linksys_syscfg | 37 ----- target/linux/mvebu/base-files/lib/preinit/82_uDPU | 48 ------- .../linux/mvebu/base-files/lib/upgrade/linksys.sh | 98 ------------- .../linux/mvebu/base-files/lib/upgrade/platform.sh | 52 ------- target/linux/mvebu/base-files/lib/upgrade/uDPU.sh | 156 --------------------- .../cortexa53/base-files/etc/board.d/02_network | 31 ++++ .../mvebu/cortexa53/base-files/lib/preinit/82_uDPU | 48 +++++++ .../cortexa53/base-files/lib/upgrade/platform.sh | 52 +++++++ .../mvebu/cortexa53/base-files/lib/upgrade/uDPU.sh | 156 +++++++++++++++++++++ .../cortexa72/base-files/etc/board.d/02_network | 30 ++++ .../cortexa72/base-files/lib/upgrade/platform.sh | 37 +++++ .../mvebu/cortexa9/base-files/etc/board.d/01_leds | 40 ++++++ .../cortexa9/base-files/etc/board.d/02_network | 58 ++++++++ .../mvebu/cortexa9/base-files/etc/init.d/bootcount | 16 +++ .../base-files/etc/uci-defaults/03_wireless | 56 ++++++++ .../base-files/etc/uci-defaults/04_mambafan | 23 +++ .../base-files/lib/preinit/06_set_iface_mac | 46 ++++++ .../base-files/lib/preinit/81_linksys_syscfg | 37 +++++ .../cortexa9/base-files/lib/upgrade/linksys.sh | 98 +++++++++++++ .../cortexa9/base-files/lib/upgrade/platform.sh | 59 ++++++++ 26 files changed, 787 insertions(+), 665 deletions(-) delete mode 100755 target/linux/mvebu/base-files/etc/board.d/01_leds delete mode 100755 target/linux/mvebu/base-files/etc/board.d/02_network delete mode 100755 target/linux/mvebu/base-files/etc/init.d/bootcount delete mode 100644 target/linux/mvebu/base-files/etc/uci-defaults/03_wireless delete mode 100644 target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan delete mode 100644 target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac delete mode 100644 target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg delete mode 100644 target/linux/mvebu/base-files/lib/preinit/82_uDPU delete mode 100644 target/linux/mvebu/base-files/lib/upgrade/linksys.sh delete mode 100755 target/linux/mvebu/base-files/lib/upgrade/platform.sh delete mode 100644 target/linux/mvebu/base-files/lib/upgrade/uDPU.sh create mode 100755 target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network create mode 100644 target/linux/mvebu/cortexa53/base-files/lib/preinit/82_uDPU create mode 100755 target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh create mode 100644 target/linux/mvebu/cortexa53/base-files/lib/upgrade/uDPU.sh create mode 100755 target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network create mode 100755 target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh create mode 100755 target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds create mode 100755 target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network create mode 100755 target/linux/mvebu/cortexa9/base-files/etc/init.d/bootcount create mode 100644 target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/03_wireless create mode 100644 target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/04_mambafan create mode 100644 target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac create mode 100644 target/linux/mvebu/cortexa9/base-files/lib/preinit/81_linksys_syscfg create mode 100644 target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh create mode 100755 target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh (limited to 'target') diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds deleted file mode 100755 index 14313ee664..0000000000 --- a/target/linux/mvebu/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2014-2016 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -linksys,caiman) - ucidef_set_led_netdev "wan" "WAN" "pca963x:caiman:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:caiman:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:caiman:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:caiman:white:usb3_2" "usb3-port1" - ;; -linksys,cobra) - ucidef_set_led_netdev "wan" "WAN" "pca963x:cobra:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:cobra:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:cobra:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:cobra:white:usb3_2" "usb3-port1" - ;; -linksys,mamba) - ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "mamba:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "mamba:white:usb3_2" "usb3-port2" - ;; -linksys,rango) - ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:rango:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:rango:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:rango:white:usb3_2" "usb3-port1" - ;; -linksys,shelby) - ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:shelby:white:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:shelby:white:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:shelby:white:usb3_2" "usb3-port1" - ;; -linksys,venom) - ucidef_set_led_netdev "wan" "WAN" "pca963x:venom:blue:wan" "eth1" - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:venom:blue:usb2" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:venom:blue:usb3_1" "usb2-port1" "usb3-port1" - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:venom:blue:usb3_2" "usb3-port1" - ;; - -esac - -board_config_flush - -exit 0 diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network deleted file mode 100755 index 283a856258..0000000000 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ /dev/null @@ -1,78 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2014-2016 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -cznic,turris-omnia) - ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4" - ucidef_set_interface_wan "eth2" - ;; -globalscale,espressobin|\ -globalscale,espressobin-emmc|\ -globalscale,espressobin-v7|\ -globalscale,espressobin-v7-emmc) - ucidef_set_interfaces_lan_wan "lan0 lan1" "wan" - ;; -linksys,caiman|\ -linksys,cobra|\ -linksys,mamba|\ -linksys,rango|\ -linksys,shelby|\ -linksys,venom) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1" - ;; -marvell,a385-db-ap) - ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2" - ;; -marvell,armada8040-mcbin) - ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2" - ;; -marvell,armada8040-db) - ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1" - ;; -marvell,armada7040-db) - ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1" - ;; -marvell,armada-3720-db) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; -marvell,axp-gp) - ucidef_set_interface_lan "eth0 eth1 eth2 eth3" - ;; -methode,udpu) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; -solidrun,clearfog-a1|solidrun,clearfog-pro-a1) - # eth0 is standalone ethernet - # eth1 is switch - # eth2 is SFP - ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" - - # switch port 5 is connected to eth1 - ucidef_add_switch "switch0" \ - "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6" - ;; -solidrun,clearfog-base-a1) - # eth0 is standalone ethernet - # eth1 is standalone ethernet - # eth2 is SFP - ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" - ;; -*) - ucidef_set_interface_lan "eth0" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/mvebu/base-files/etc/init.d/bootcount b/target/linux/mvebu/base-files/etc/init.d/bootcount deleted file mode 100755 index dd2266bdc8..0000000000 --- a/target/linux/mvebu/base-files/etc/init.d/bootcount +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh /etc/rc.common - -START=99 - -boot() { - case $(board_name) in - linksys,caiman |\ - linksys,cobra |\ - linksys,mamba |\ - linksys,rango |\ - linksys,shelby |\ - linksys,venom) - mtd resetbc s_env || true - ;; - esac -} diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless deleted file mode 100644 index 3c345ff148..0000000000 --- a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless +++ /dev/null @@ -1,56 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2015 OpenWrt.org -# - -[ ! -e /etc/config/wireless ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -board=$(board_name) - -case "$board" in -linksys,caiman|linksys,cobra|linksys,mamba|linksys,shelby|linksys,venom) - SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p') - WIFIMAC2G=$(macaddr_add $(cat /sys/class/net/eth0/address) +1) - WIFIMAC5G=$(macaddr_add $WIFIMAC2G +1) - case "$SKU" in - AP) - REGD=CN - ;; - AU) - REGD=AU - ;; - CA) - REGD=CA - ;; - EU) - REGD=DE - ;; - US) - REGD=US - ;; - esac - - case "$board" in - linksys,mamba) - WIFIMAC0=$WIFIMAC2G - WIFIMAC1=$WIFIMAC5G - ;; - *) - WIFIMAC0=$WIFIMAC5G - WIFIMAC1=$WIFIMAC2G - ;; - esac - - uci get wireless.radio0.country || uci set wireless.radio0.country=$REGD - uci get wireless.@wifi-iface[0].macaddr || uci set wireless.@wifi-iface[0].macaddr=$WIFIMAC0 - uci get wireless.radio1.country || uci set wireless.radio1.country=$REGD - uci get wireless.@wifi-iface[1].macaddr || uci set wireless.@wifi-iface[1].macaddr=$WIFIMAC1 - ;; -esac - -uci commit wireless - -exit 0 diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan b/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan deleted file mode 100644 index ec25aedad6..0000000000 --- a/target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2017 LEDE-Project.org -# - -. /lib/functions.sh - -board=$(board_name) - -case "$board" in -linksys,mamba) - # Set fan script execution in crontab - grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0 - - echo "# mamba fan script runs every 5 minutes" >> /etc/crontabs/root - echo "*/5 * * * * /sbin/fan_ctrl.sh" >> /etc/crontabs/root - - # Execute one time after initial flash (instead of waiting 5 min for cron) - /sbin/fan_ctrl.sh - ;; -esac - -exit 0 diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac deleted file mode 100644 index fd41836c8d..0000000000 --- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac +++ /dev/null @@ -1,46 +0,0 @@ -# -# Copyright (C) 2014-2015 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -preinit_set_mac_address() { - local mac - - . /lib/functions.sh - - case $(board_name) in - linksys,caiman|linksys,cobra|linksys,rango|linksys,shelby|linksys,venom) - # rename interfaces back to the way they were with 4.4 - case "$(readlink /sys/class/net/eth0)" in - *f1070000*) - ip link set eth0 name tmp0 - ip link set eth1 name eth0 - ip link set tmp0 name eth1 - ;; - esac - - mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) - mac_wan=$(macaddr_setbit_la "$mac") - ip link set dev eth0 address $mac 2>/dev/null - ip link set dev eth1 address $mac_wan 2>/dev/null - ;; - linksys,mamba) - mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) - ip link set dev eth0 address $mac 2>/dev/null - ip link set dev eth1 address $mac 2>/dev/null - ;; - marvell,a385-db-ap|solidrun,clearfog*a1) - # rename interfaces back to the way they were with 4.4 - case "$(readlink /sys/class/net/eth0)" in - *f1070000*) - ip link set eth0 name tmp0 - ip link set eth1 name eth0 - ip link set eth2 name eth1 - ip link set tmp0 name eth2 - ;; - esac - ;; - esac -} - -boot_hook_add preinit_main preinit_set_mac_address diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg deleted file mode 100644 index 83448e5ace..0000000000 --- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg +++ /dev/null @@ -1,37 +0,0 @@ -# -# Copyright (C) 2014-2016 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -preinit_mount_syscfg() { - . /lib/functions.sh - . /lib/upgrade/common.sh - - case $(board_name) in - linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom) - needs_recovery=0 - syscfg_part=$(grep syscfg /proc/mtd |cut -c4) - ubiattach -m $syscfg_part || needs_recovery=1 - if [ $needs_recovery -eq 1 ] - then - echo "ubifs syscfg partition is damaged, reformatting" - ubidetach -m $syscfg_part - ubiformat -y -O 2048 -q /dev/mtd$syscfg_part - ubiattach -m $syscfg_part - ubimkvol /dev/ubi1 -n 0 -N syscfg -t dynamic --maxavsize - fi - mkdir /tmp/syscfg - mount -t ubifs ubi1:syscfg /tmp/syscfg - [ -f "/tmp/syscfg/$BACKUP_FILE" ] && { - echo "- config restore -" - cd / - mv "/tmp/syscfg/$BACKUP_FILE" /tmp - tar xzf "/tmp/$BACKUP_FILE" - rm -f "/tmp/$BACKUP_FILE" - sync - } - ;; - esac -} - -boot_hook_add preinit_main preinit_mount_syscfg diff --git a/target/linux/mvebu/base-files/lib/preinit/82_uDPU b/target/linux/mvebu/base-files/lib/preinit/82_uDPU deleted file mode 100644 index 12bbfc3725..0000000000 --- a/target/linux/mvebu/base-files/lib/preinit/82_uDPU +++ /dev/null @@ -1,48 +0,0 @@ -# -# Copyright (C) 2014-2019 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -preinit_mount_udpu() { - . /lib/functions.sh - . /lib/upgrade/common.sh - - case $(board_name) in - methode,udpu) - # Check which device is detected - [ -b "/dev/mmcblk0" ] && mmcdev="/dev/mmcblk0" || mmcdev="/dev/mmcblk1" - - if [ -b "${mmcdev}p4" ]; then - mkdir /misc - mount -t f2fs ${mmcdev}p4 /misc - [ -f "/misc/$BACKUP_FILE" ] && { - echo "- Restoring configuration files -" - tar xzf "/misc/$BACKUP_FILE" -C / - rm -f "/misc/$BACKUP_FILE" - sync - } - [ -f "/misc/firmware/recovery.itb" ] && { - echo "- Updating /recovery partition -" - mkfs.ext4 -q ${mmcdev}p2 | echo y &> /dev/null - mkdir -p /tmp/recovery - mount ${mmcdev}p2 /tmp/recovery - cp /misc/firmware/recovery.itb /tmp/recovery - [ -f "/misc/firmware/boot.scr" ] && \ - cp /misc/firmware/boot.scr /tmp/recovery - sync - umount /tmp/recovery - rm -rf /tmp/recovery - - # Replace previous backup with the new one - [ -d "/misc/firmware_old" ] && rm -rf /misc/firmware_old - [ -d "/misc/firmware" ] && mv /misc/firmware /misc/firmware_old - } - fi - - # Legacy support - if rootfs was booted, instruct u-boot to keep the current root dev - [ "$(df | grep /dev/root)" ] && fw_setenv root_ok '2' - ;; - esac -} - -boot_hook_add preinit_main preinit_mount_udpu diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh deleted file mode 100644 index 6ccfdd0768..0000000000 --- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh +++ /dev/null @@ -1,98 +0,0 @@ -# -# Copyright (C) 2014-2015 OpenWrt.org -# - -linksys_get_target_firmware() { - - local cur_boot_part mtd_ubi0 - - cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part) - if [ -z "${cur_boot_part}" ] ; then - mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num) - case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in - kernel1|rootfs1) - cur_boot_part=1 - ;; - kernel2|rootfs2) - cur_boot_part=2 - ;; - esac - >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \ - "${cur_boot_part}" "${mtd_ubi0}" - fi - - case $cur_boot_part in - 1) - fw_setenv -s - <<-EOF - boot_part 2 - bootcmd "run altnandboot" - EOF - printf "kernel2" - return - ;; - 2) - fw_setenv -s - <<-EOF - boot_part 1 - bootcmd "run nandboot" - EOF - printf "kernel1" - return - ;; - *) - return - ;; - esac -} - -linksys_get_root_magic() { - (get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null -} - -platform_do_upgrade_linksys() { - local magic_long="$(get_magic_long "$1")" - - mkdir -p /var/lock - local part_label="$(linksys_get_target_firmware)" - touch /var/lock/fw_printenv.lock - - if [ ! -n "$part_label" ] - then - echo "cannot find target partition" - exit 1 - fi - - local target_mtd=$(find_mtd_part $part_label) - - [ "$magic_long" = "73797375" ] && { - CI_KERNPART="$part_label" - if [ "$part_label" = "kernel1" ] - then - CI_UBIPART="rootfs1" - else - CI_UBIPART="rootfs2" - fi - - nand_upgrade_tar "$1" - } - [ "$magic_long" = "27051956" -o "$magic_long" = "0000a0e1" ] && { - # check firmwares' rootfs types - local target_mtd=$(find_mtd_part $part_label) - local oldroot="$(linksys_get_root_magic $target_mtd)" - local newroot="$(linksys_get_root_magic "$1")" - - if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ] - # we're upgrading from a firmware with UBI to one with UBI - then - # erase everything to be safe - mtd erase $part_label - get_image "$1" | mtd -n write - $part_label - else - get_image "$1" | mtd write - $part_label - fi - } -} - -platform_copy_config_linksys() { - cp -f "$UPGRADE_BACKUP" "/tmp/syscfg/$BACKUP_FILE" - sync -} diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh deleted file mode 100755 index 0223b72d71..0000000000 --- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,52 +0,0 @@ -# -# Copyright (C) 2014-2016 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org -# - -RAMFS_COPY_BIN='fw_printenv fw_setenv' -RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' -REQUIRE_IMAGE_METADATA=1 - -platform_check_image() { - case "$(board_name)" in - cznic,turris-omnia|globalscale,espressobin|globalscale,espressobin-emmc|globalscale,espressobin-v7|globalscale,espressobin-v7-emmc|\ - marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1) - platform_check_image_sdcard "$1" - ;; - *) - return 0 - ;; - esac -} - -platform_do_upgrade() { - case "$(board_name)" in - linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom) - platform_do_upgrade_linksys "$1" - ;; - cznic,turris-omnia|globalscale,espressobin|globalscale,espressobin-emmc|globalscale,espressobin-v7|globalscale,espressobin-v7-emmc|\ - marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1) - platform_do_upgrade_sdcard "$1" - ;; - methode,udpu) - platform_do_upgrade_uDPU "$1" - ;; - *) - default_do_upgrade "$1" - ;; - esac -} -platform_copy_config() { - case "$(board_name)" in - linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom) - platform_copy_config_linksys - ;; - cznic,turris-omnia|globalscale,espressobin|globalscale,espressobin-emmc|globalscale,espressobin-v7|globalscale,espressobin-v7-emmc|\ - marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1) - platform_copy_config_sdcard - ;; - methode,udpu) - platform_copy_config_uDPU - ;; - esac -} diff --git a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh b/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh deleted file mode 100644 index 032c706605..0000000000 --- a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh +++ /dev/null @@ -1,156 +0,0 @@ -udpu_check_emmc() { -# uDPU uses combined ext4 and f2fs partitions. -# partition layout: -# 1. boot (ext4) -# 2. recovery (ext4) -# 3. rootfs (f2fs) -# 4. misc (f2fs) - - # Check which device is available, depending on the board revision - if [ -b "/dev/mmcblk1" ]; then - emmc_dev=/dev/mmcblk1 - elif [ -b "/dev/mmcblk0" ]; then - emmc_dev=/dev/mmcblk0 - else - echo "Cannot detect eMMC flash, aborting.." - exit 1 - fi -} - -udpu_part_prep() { - if [ "$(grep $1 /proc/mounts)" ]; then - mounted_part="$(grep $1 /proc/mounts | awk '{print $2}' | head -1)" - umount $mounted_part - [ "$(grep -wo $mounted_part /proc/mounts)" ] && umount -l $mounted_part - fi -} - -udpu_do_part_check() { - local emmc_parts="1 2 3 4" - local part_valid="1" - - # Check if the block devices exist - for num in ${emmc_parts}; do - [[ ! -b ${emmc_dev}p${num} ]] && part_valid="0" - done - - # If partitions are missing create a new partition table - if [ "$part_valid" != "1" ]; then - printf "Invalid partition table, creating a new one\n" - printf "o\nn\np\n1\n\n+256M\nn\np\n2\n\n+256M\nn\np\n3\n\n+1536M\nn\np\n\n\nw\n" | fdisk -W always $emmc_dev > /dev/null 2>&1 - - # Format the /misc part right away as we will need it for the firmware - printf "Formating /misc partition, this make take a while..\n" - udpu_part_prep ${emmc_dev}p4 - mkfs.f2fs -q -l misc ${emmc_dev}p4 - [ $? -eq 0 ] && printf "/misc partition formated successfully\n" || printf "/misc partition formatting failed\n" - - udpu_do_initial_setup - else - printf "Partition table looks ok\n" - fi -} - -udpu_do_misc_prep() { - if [ ! "$(grep -wo /misc /proc/mounts)" ]; then - mkdir -p /misc - mount ${emmc_dev}p4 /misc - - # If the mount fails, try to reformat partition - # Leaving possiblity for multiple iterations - if [ $? -ne 0 ]; then - printf "Error while mounting /misc, trying to reformat..\n" - - format_count=0 - while [ "$format_count" -lt "1" ]; do - udpu_part_prep ${emmc_dev}p4 - mkfs.f2fs -q -l misc ${emmc_dev}p4 - mount ${emmc_dev}p4 /misc - if [ $? -ne 0 ]; then - umount -l /misc - printf "Failed while mounting /misc\n" - format_count=$((format_count +1)) - else - printf "Mounted /misc successfully\n" - break - fi - done - fi - fi -} - -udpu_do_initial_setup() { - # Prepare /recovery parition - udpu_part_prep ${emmc_dev}p2 - mkfs.ext4 -q ${emmc_dev}p2 | echo y &> /dev/null - - # Prepare /boot partition - udpu_part_prep ${emmc_dev}p1 - mkfs.ext4 -q ${emmc_dev}p1 | echo y &> /dev/null - - # Prepare /root partition - printf "Formating /root partition, this may take a while..\n" - udpu_part_prep ${emmc_dev}p3 - mkfs.f2fs -q -l rootfs ${emmc_dev}p3 - [ $? -eq 0 ] && printf "/root partition reformated\n" -} - -udpu_do_regular_upgrade() { - # Clean /boot partition - mfks.ext4 is not available in chroot - [ "$(grep -wo /boot /proc/mounts)" ] && umount /boot - mkdir -p /tmp/boot - mount ${emmc_dev}p1 /tmp/boot - rm -rf /tmp/boot/* - - # Clean /root partition - mkfs.f2fs is not available in chroot - [ "$(grep -wo /dev/root /proc/mounts)" ] && umount / - mkdir -p /tmp/rootpart - mount ${emmc_dev}p3 /tmp/rootpart - rm -rf /tmp/rootpart/* -} - -platform_do_upgrade_uDPU() { - udpu_check_emmc - - # Prepare and extract firmware on /misc partition - udpu_do_misc_prep - - [ -f "/misc/firmware" ] && rm -r /misc/firmware - mkdir -p /misc/firmware - tar xzf "$1" -C /misc/firmware/ - - udpu_do_regular_upgrade - - printf "Updating /boot partition\n" - tar xzf /misc/firmware/boot.tgz -C /tmp/boot - [ $? -eq 0 ] && printf "/boot partition updated successfully\n" || printf "/boot partition update failed\n" - sync - - printf "Updating /root partition\n" - tar xzf /misc/firmware/rootfs.tgz -C /tmp/rootpart - [ $? -eq 0 ] && printf "/root partition updated successfully\n" || printf "/root partition update failed\n" - sync - - # Saving configuration files over sysupgrade - platform_copy_config_uDPU - - # Remove tmp mounts - tmp_parts=$(grep "${emmc_dev}" /proc/mounts | awk '{print $2}') - for part in ${tmp_parts}; do - umount $part - # Force umount is necessary - [ "$(grep "${part}" /proc/mounts)" ] && umount -l $part - done - - # Sysupgrade complains about /tmp and /dev, so we can detach them here - umount -l /tmp - umount -l /dev -} - -platform_copy_config_uDPU() { - # Config is saved on the /misc partition and copied on the rootfs after the reboot - if [ -f "$UPGRADE_BACKUP" ]; then - cp -f "$UPGRADE_BACKUP" "/misc/$BACKUP_FILE" - sync - fi -} diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..ba4b930426 --- /dev/null +++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network @@ -0,0 +1,31 @@ +#!/bin/sh +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +globalscale,espressobin|\ +globalscale,espressobin-emmc|\ +globalscale,espressobin-v7|\ +globalscale,espressobin-v7-emmc) + ucidef_set_interfaces_lan_wan "lan0 lan1" "wan" + ;; +marvell,armada-3720-db|\ +methode,udpu) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + ;; +*) + ucidef_set_interface_lan "eth0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/mvebu/cortexa53/base-files/lib/preinit/82_uDPU b/target/linux/mvebu/cortexa53/base-files/lib/preinit/82_uDPU new file mode 100644 index 0000000000..12bbfc3725 --- /dev/null +++ b/target/linux/mvebu/cortexa53/base-files/lib/preinit/82_uDPU @@ -0,0 +1,48 @@ +# +# Copyright (C) 2014-2019 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +preinit_mount_udpu() { + . /lib/functions.sh + . /lib/upgrade/common.sh + + case $(board_name) in + methode,udpu) + # Check which device is detected + [ -b "/dev/mmcblk0" ] && mmcdev="/dev/mmcblk0" || mmcdev="/dev/mmcblk1" + + if [ -b "${mmcdev}p4" ]; then + mkdir /misc + mount -t f2fs ${mmcdev}p4 /misc + [ -f "/misc/$BACKUP_FILE" ] && { + echo "- Restoring configuration files -" + tar xzf "/misc/$BACKUP_FILE" -C / + rm -f "/misc/$BACKUP_FILE" + sync + } + [ -f "/misc/firmware/recovery.itb" ] && { + echo "- Updating /recovery partition -" + mkfs.ext4 -q ${mmcdev}p2 | echo y &> /dev/null + mkdir -p /tmp/recovery + mount ${mmcdev}p2 /tmp/recovery + cp /misc/firmware/recovery.itb /tmp/recovery + [ -f "/misc/firmware/boot.scr" ] && \ + cp /misc/firmware/boot.scr /tmp/recovery + sync + umount /tmp/recovery + rm -rf /tmp/recovery + + # Replace previous backup with the new one + [ -d "/misc/firmware_old" ] && rm -rf /misc/firmware_old + [ -d "/misc/firmware" ] && mv /misc/firmware /misc/firmware_old + } + fi + + # Legacy support - if rootfs was booted, instruct u-boot to keep the current root dev + [ "$(df | grep /dev/root)" ] && fw_setenv root_ok '2' + ;; + esac +} + +boot_hook_add preinit_main preinit_mount_udpu diff --git a/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..cdf5933272 --- /dev/null +++ b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh @@ -0,0 +1,52 @@ +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + case "$(board_name)" in + globalscale,espressobin|\ + globalscale,espressobin-emmc|\ + globalscale,espressobin-v7|\ + globalscale,espressobin-v7-emmc) + platform_check_image_sdcard "$1" + ;; + *) + return 0 + ;; + esac +} + +platform_do_upgrade() { + case "$(board_name)" in + globalscale,espressobin|\ + globalscale,espressobin-emmc|\ + globalscale,espressobin-v7|\ + globalscale,espressobin-v7-emmc) + platform_do_upgrade_sdcard "$1" + ;; + methode,udpu) + platform_do_upgrade_uDPU "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} +platform_copy_config() { + case "$(board_name)" in + globalscale,espressobin|\ + globalscale,espressobin-emmc|\ + globalscale,espressobin-v7|\ + globalscale,espressobin-v7-emmc) + platform_copy_config_sdcard + ;; + methode,udpu) + platform_copy_config_uDPU + ;; + esac +} diff --git a/target/linux/mvebu/cortexa53/base-files/lib/upgrade/uDPU.sh b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/uDPU.sh new file mode 100644 index 0000000000..032c706605 --- /dev/null +++ b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/uDPU.sh @@ -0,0 +1,156 @@ +udpu_check_emmc() { +# uDPU uses combined ext4 and f2fs partitions. +# partition layout: +# 1. boot (ext4) +# 2. recovery (ext4) +# 3. rootfs (f2fs) +# 4. misc (f2fs) + + # Check which device is available, depending on the board revision + if [ -b "/dev/mmcblk1" ]; then + emmc_dev=/dev/mmcblk1 + elif [ -b "/dev/mmcblk0" ]; then + emmc_dev=/dev/mmcblk0 + else + echo "Cannot detect eMMC flash, aborting.." + exit 1 + fi +} + +udpu_part_prep() { + if [ "$(grep $1 /proc/mounts)" ]; then + mounted_part="$(grep $1 /proc/mounts | awk '{print $2}' | head -1)" + umount $mounted_part + [ "$(grep -wo $mounted_part /proc/mounts)" ] && umount -l $mounted_part + fi +} + +udpu_do_part_check() { + local emmc_parts="1 2 3 4" + local part_valid="1" + + # Check if the block devices exist + for num in ${emmc_parts}; do + [[ ! -b ${emmc_dev}p${num} ]] && part_valid="0" + done + + # If partitions are missing create a new partition table + if [ "$part_valid" != "1" ]; then + printf "Invalid partition table, creating a new one\n" + printf "o\nn\np\n1\n\n+256M\nn\np\n2\n\n+256M\nn\np\n3\n\n+1536M\nn\np\n\n\nw\n" | fdisk -W always $emmc_dev > /dev/null 2>&1 + + # Format the /misc part right away as we will need it for the firmware + printf "Formating /misc partition, this make take a while..\n" + udpu_part_prep ${emmc_dev}p4 + mkfs.f2fs -q -l misc ${emmc_dev}p4 + [ $? -eq 0 ] && printf "/misc partition formated successfully\n" || printf "/misc partition formatting failed\n" + + udpu_do_initial_setup + else + printf "Partition table looks ok\n" + fi +} + +udpu_do_misc_prep() { + if [ ! "$(grep -wo /misc /proc/mounts)" ]; then + mkdir -p /misc + mount ${emmc_dev}p4 /misc + + # If the mount fails, try to reformat partition + # Leaving possiblity for multiple iterations + if [ $? -ne 0 ]; then + printf "Error while mounting /misc, trying to reformat..\n" + + format_count=0 + while [ "$format_count" -lt "1" ]; do + udpu_part_prep ${emmc_dev}p4 + mkfs.f2fs -q -l misc ${emmc_dev}p4 + mount ${emmc_dev}p4 /misc + if [ $? -ne 0 ]; then + umount -l /misc + printf "Failed while mounting /misc\n" + format_count=$((format_count +1)) + else + printf "Mounted /misc successfully\n" + break + fi + done + fi + fi +} + +udpu_do_initial_setup() { + # Prepare /recovery parition + udpu_part_prep ${emmc_dev}p2 + mkfs.ext4 -q ${emmc_dev}p2 | echo y &> /dev/null + + # Prepare /boot partition + udpu_part_prep ${emmc_dev}p1 + mkfs.ext4 -q ${emmc_dev}p1 | echo y &> /dev/null + + # Prepare /root partition + printf "Formating /root partition, this may take a while..\n" + udpu_part_prep ${emmc_dev}p3 + mkfs.f2fs -q -l rootfs ${emmc_dev}p3 + [ $? -eq 0 ] && printf "/root partition reformated\n" +} + +udpu_do_regular_upgrade() { + # Clean /boot partition - mfks.ext4 is not available in chroot + [ "$(grep -wo /boot /proc/mounts)" ] && umount /boot + mkdir -p /tmp/boot + mount ${emmc_dev}p1 /tmp/boot + rm -rf /tmp/boot/* + + # Clean /root partition - mkfs.f2fs is not available in chroot + [ "$(grep -wo /dev/root /proc/mounts)" ] && umount / + mkdir -p /tmp/rootpart + mount ${emmc_dev}p3 /tmp/rootpart + rm -rf /tmp/rootpart/* +} + +platform_do_upgrade_uDPU() { + udpu_check_emmc + + # Prepare and extract firmware on /misc partition + udpu_do_misc_prep + + [ -f "/misc/firmware" ] && rm -r /misc/firmware + mkdir -p /misc/firmware + tar xzf "$1" -C /misc/firmware/ + + udpu_do_regular_upgrade + + printf "Updating /boot partition\n" + tar xzf /misc/firmware/boot.tgz -C /tmp/boot + [ $? -eq 0 ] && printf "/boot partition updated successfully\n" || printf "/boot partition update failed\n" + sync + + printf "Updating /root partition\n" + tar xzf /misc/firmware/rootfs.tgz -C /tmp/rootpart + [ $? -eq 0 ] && printf "/root partition updated successfully\n" || printf "/root partition update failed\n" + sync + + # Saving configuration files over sysupgrade + platform_copy_config_uDPU + + # Remove tmp mounts + tmp_parts=$(grep "${emmc_dev}" /proc/mounts | awk '{print $2}') + for part in ${tmp_parts}; do + umount $part + # Force umount is necessary + [ "$(grep "${part}" /proc/mounts)" ] && umount -l $part + done + + # Sysupgrade complains about /tmp and /dev, so we can detach them here + umount -l /tmp + umount -l /dev +} + +platform_copy_config_uDPU() { + # Config is saved on the /misc partition and copied on the rootfs after the reboot + if [ -f "$UPGRADE_BACKUP" ]; then + cp -f "$UPGRADE_BACKUP" "/misc/$BACKUP_FILE" + sync + fi +} diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..080e32ada3 --- /dev/null +++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network @@ -0,0 +1,30 @@ +#!/bin/sh +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +marvell,armada8040-mcbin) + ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2" + ;; +marvell,armada8040-db) + ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1" + ;; +marvell,armada7040-db) + ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1" + ;; +*) + ucidef_set_interface_lan "eth0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..2428de08c4 --- /dev/null +++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh @@ -0,0 +1,37 @@ +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + case "$(board_name)" in + marvell,armada8040-mcbin) + platform_check_image_sdcard "$1" + ;; + *) + return 0 + ;; + esac +} + +platform_do_upgrade() { + case "$(board_name)" in + marvell,armada8040-mcbin) + platform_do_upgrade_sdcard "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} +platform_copy_config() { + case "$(board_name)" in + marvell,armada8040-mcbin) + platform_copy_config_sdcard + ;; + esac +} diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..a7762f0080 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds @@ -0,0 +1,40 @@ +#!/bin/sh +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) +boardname="${board##*,}" + +case "$board" in +linksys,caiman|\ +linksys,cobra|\ +linksys,rango|\ +linksys,shelby) + ucidef_set_led_netdev "wan" "WAN" "pca963x:$boardname:white:wan" "eth1" + ucidef_set_led_usbport "usb1" "USB 1" "pca963x:$boardname:white:usb2" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB 2" "pca963x:$boardname:white:usb3_1" "usb2-port1" "usb3-port1" + ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:$boardname:white:usb3_2" "usb3-port1" + ;; +linksys,mamba) + ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1" + ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB 2" "mamba:white:usb3_1" "usb2-port1" "usb3-port1" + ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "mamba:white:usb3_2" "usb3-port2" + ;; +linksys,venom) + ucidef_set_led_netdev "wan" "WAN" "pca963x:venom:blue:wan" "eth1" + ucidef_set_led_usbport "usb1" "USB 1" "pca963x:venom:blue:usb2" "usb1-port1" + ucidef_set_led_usbport "usb2" "USB 2" "pca963x:venom:blue:usb3_1" "usb2-port1" "usb3-port1" + ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:venom:blue:usb3_2" "usb3-port1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..b10e1419b5 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network @@ -0,0 +1,58 @@ +#!/bin/sh +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +cznic,turris-omnia) + ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4" + ucidef_set_interface_wan "eth2" + ;; +linksys,caiman|\ +linksys,cobra|\ +linksys,mamba|\ +linksys,rango|\ +linksys,shelby|\ +linksys,venom) + ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1" + ;; +marvell,a385-db-ap) + ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2" + ;; +marvell,axp-gp) + ucidef_set_interface_lan "eth0 eth1 eth2 eth3" + ;; +solidrun,clearfog-a1|\ +solidrun,clearfog-pro-a1) + # eth0 is standalone ethernet + # eth1 is switch + # eth2 is SFP + ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" + + # switch port 5 is connected to eth1 + ucidef_add_switch "switch0" \ + "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6" + ;; +solidrun,clearfog-base-a1) + # eth0 is standalone ethernet + # eth1 is standalone ethernet + # eth2 is SFP + ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" + ;; +*) + ucidef_set_interface_lan "eth0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/mvebu/cortexa9/base-files/etc/init.d/bootcount b/target/linux/mvebu/cortexa9/base-files/etc/init.d/bootcount new file mode 100755 index 0000000000..dd2266bdc8 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/etc/init.d/bootcount @@ -0,0 +1,16 @@ +#!/bin/sh /etc/rc.common + +START=99 + +boot() { + case $(board_name) in + linksys,caiman |\ + linksys,cobra |\ + linksys,mamba |\ + linksys,rango |\ + linksys,shelby |\ + linksys,venom) + mtd resetbc s_env || true + ;; + esac +} diff --git a/target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/03_wireless new file mode 100644 index 0000000000..3c345ff148 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/03_wireless @@ -0,0 +1,56 @@ +#!/bin/sh +# +# Copyright (C) 2015 OpenWrt.org +# + +[ ! -e /etc/config/wireless ] && exit 0 + +. /lib/functions.sh +. /lib/functions/system.sh + +board=$(board_name) + +case "$board" in +linksys,caiman|linksys,cobra|linksys,mamba|linksys,shelby|linksys,venom) + SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p') + WIFIMAC2G=$(macaddr_add $(cat /sys/class/net/eth0/address) +1) + WIFIMAC5G=$(macaddr_add $WIFIMAC2G +1) + case "$SKU" in + AP) + REGD=CN + ;; + AU) + REGD=AU + ;; + CA) + REGD=CA + ;; + EU) + REGD=DE + ;; + US) + REGD=US + ;; + esac + + case "$board" in + linksys,mamba) + WIFIMAC0=$WIFIMAC2G + WIFIMAC1=$WIFIMAC5G + ;; + *) + WIFIMAC0=$WIFIMAC5G + WIFIMAC1=$WIFIMAC2G + ;; + esac + + uci get wireless.radio0.country || uci set wireless.radio0.country=$REGD + uci get wireless.@wifi-iface[0].macaddr || uci set wireless.@wifi-iface[0].macaddr=$WIFIMAC0 + uci get wireless.radio1.country || uci set wireless.radio1.country=$REGD + uci get wireless.@wifi-iface[1].macaddr || uci set wireless.@wifi-iface[1].macaddr=$WIFIMAC1 + ;; +esac + +uci commit wireless + +exit 0 diff --git a/target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/04_mambafan b/target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/04_mambafan new file mode 100644 index 0000000000..ec25aedad6 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/etc/uci-defaults/04_mambafan @@ -0,0 +1,23 @@ +#!/bin/sh +# +# Copyright (C) 2017 LEDE-Project.org +# + +. /lib/functions.sh + +board=$(board_name) + +case "$board" in +linksys,mamba) + # Set fan script execution in crontab + grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0 + + echo "# mamba fan script runs every 5 minutes" >> /etc/crontabs/root + echo "*/5 * * * * /sbin/fan_ctrl.sh" >> /etc/crontabs/root + + # Execute one time after initial flash (instead of waiting 5 min for cron) + /sbin/fan_ctrl.sh + ;; +esac + +exit 0 diff --git a/target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac new file mode 100644 index 0000000000..fd41836c8d --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/lib/preinit/06_set_iface_mac @@ -0,0 +1,46 @@ +# +# Copyright (C) 2014-2015 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +preinit_set_mac_address() { + local mac + + . /lib/functions.sh + + case $(board_name) in + linksys,caiman|linksys,cobra|linksys,rango|linksys,shelby|linksys,venom) + # rename interfaces back to the way they were with 4.4 + case "$(readlink /sys/class/net/eth0)" in + *f1070000*) + ip link set eth0 name tmp0 + ip link set eth1 name eth0 + ip link set tmp0 name eth1 + ;; + esac + + mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) + mac_wan=$(macaddr_setbit_la "$mac") + ip link set dev eth0 address $mac 2>/dev/null + ip link set dev eth1 address $mac_wan 2>/dev/null + ;; + linksys,mamba) + mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ip link set dev eth0 address $mac 2>/dev/null + ip link set dev eth1 address $mac 2>/dev/null + ;; + marvell,a385-db-ap|solidrun,clearfog*a1) + # rename interfaces back to the way they were with 4.4 + case "$(readlink /sys/class/net/eth0)" in + *f1070000*) + ip link set eth0 name tmp0 + ip link set eth1 name eth0 + ip link set eth2 name eth1 + ip link set tmp0 name eth2 + ;; + esac + ;; + esac +} + +boot_hook_add preinit_main preinit_set_mac_address diff --git a/target/linux/mvebu/cortexa9/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/cortexa9/base-files/lib/preinit/81_linksys_syscfg new file mode 100644 index 0000000000..83448e5ace --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/lib/preinit/81_linksys_syscfg @@ -0,0 +1,37 @@ +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +preinit_mount_syscfg() { + . /lib/functions.sh + . /lib/upgrade/common.sh + + case $(board_name) in + linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom) + needs_recovery=0 + syscfg_part=$(grep syscfg /proc/mtd |cut -c4) + ubiattach -m $syscfg_part || needs_recovery=1 + if [ $needs_recovery -eq 1 ] + then + echo "ubifs syscfg partition is damaged, reformatting" + ubidetach -m $syscfg_part + ubiformat -y -O 2048 -q /dev/mtd$syscfg_part + ubiattach -m $syscfg_part + ubimkvol /dev/ubi1 -n 0 -N syscfg -t dynamic --maxavsize + fi + mkdir /tmp/syscfg + mount -t ubifs ubi1:syscfg /tmp/syscfg + [ -f "/tmp/syscfg/$BACKUP_FILE" ] && { + echo "- config restore -" + cd / + mv "/tmp/syscfg/$BACKUP_FILE" /tmp + tar xzf "/tmp/$BACKUP_FILE" + rm -f "/tmp/$BACKUP_FILE" + sync + } + ;; + esac +} + +boot_hook_add preinit_main preinit_mount_syscfg diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh new file mode 100644 index 0000000000..6ccfdd0768 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh @@ -0,0 +1,98 @@ +# +# Copyright (C) 2014-2015 OpenWrt.org +# + +linksys_get_target_firmware() { + + local cur_boot_part mtd_ubi0 + + cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part) + if [ -z "${cur_boot_part}" ] ; then + mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num) + case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in + kernel1|rootfs1) + cur_boot_part=1 + ;; + kernel2|rootfs2) + cur_boot_part=2 + ;; + esac + >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \ + "${cur_boot_part}" "${mtd_ubi0}" + fi + + case $cur_boot_part in + 1) + fw_setenv -s - <<-EOF + boot_part 2 + bootcmd "run altnandboot" + EOF + printf "kernel2" + return + ;; + 2) + fw_setenv -s - <<-EOF + boot_part 1 + bootcmd "run nandboot" + EOF + printf "kernel1" + return + ;; + *) + return + ;; + esac +} + +linksys_get_root_magic() { + (get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null +} + +platform_do_upgrade_linksys() { + local magic_long="$(get_magic_long "$1")" + + mkdir -p /var/lock + local part_label="$(linksys_get_target_firmware)" + touch /var/lock/fw_printenv.lock + + if [ ! -n "$part_label" ] + then + echo "cannot find target partition" + exit 1 + fi + + local target_mtd=$(find_mtd_part $part_label) + + [ "$magic_long" = "73797375" ] && { + CI_KERNPART="$part_label" + if [ "$part_label" = "kernel1" ] + then + CI_UBIPART="rootfs1" + else + CI_UBIPART="rootfs2" + fi + + nand_upgrade_tar "$1" + } + [ "$magic_long" = "27051956" -o "$magic_long" = "0000a0e1" ] && { + # check firmwares' rootfs types + local target_mtd=$(find_mtd_part $part_label) + local oldroot="$(linksys_get_root_magic $target_mtd)" + local newroot="$(linksys_get_root_magic "$1")" + + if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ] + # we're upgrading from a firmware with UBI to one with UBI + then + # erase everything to be safe + mtd erase $part_label + get_image "$1" | mtd -n write - $part_label + else + get_image "$1" | mtd write - $part_label + fi + } +} + +platform_copy_config_linksys() { + cp -f "$UPGRADE_BACKUP" "/tmp/syscfg/$BACKUP_FILE" + sync +} diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..8baed969a3 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh @@ -0,0 +1,59 @@ +# +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org +# + +RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + case "$(board_name)" in + cznic,turris-omnia|\ + solidrun,clearfog-base-a1|\ + solidrun,clearfog-pro-a1) + platform_check_image_sdcard "$1" + ;; + *) + return 0 + ;; + esac +} + +platform_do_upgrade() { + case "$(board_name)" in + cznic,turris-omnia|\ + solidrun,clearfog-base-a1|\ + solidrun,clearfog-pro-a1) + platform_do_upgrade_sdcard "$1" + ;; + linksys,caiman|\ + linksys,cobra|\ + linksys,mamba|\ + linksys,rango|\ + linksys,shelby|\ + linksys,venom) + platform_do_upgrade_linksys "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} +platform_copy_config() { + case "$(board_name)" in + cznic,turris-omnia|\ + solidrun,clearfog-base-a1|\ + solidrun,clearfog-pro-a1) + platform_copy_config_sdcard + ;; + linksys,caiman|\ + linksys,cobra|\ + linksys,mamba|\ + linksys,rango|\ + linksys,shelby|\ + linksys,venom) + platform_copy_config_linksys + ;; + esac +} -- cgit v1.2.3