From ba220ad2fd915aaed2e9c850a84078c5c5977d3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 11 Mar 2021 13:35:38 +0100 Subject: realtek: drop ethtool log noise MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Demote a number of debugging printk's to pr_debug to avoid log nosie. Several of these functions are called as a result of userspace activity. This can cause a lot of log noise when userspace does periodic polling. Most of this could probably be removed completely, but let's keep it for now since these drivers are still in development. Signed-off-by: Bjørn Mork Tested-by: Stijn Tintel --- .../files-5.4/drivers/net/dsa/rtl83xx/dsa.c | 2 +- .../files-5.4/drivers/net/ethernet/rtl838x_eth.c | 28 +++++++++++----------- 2 files changed, 15 insertions(+), 15 deletions(-) (limited to 'target') diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c index e0832c42b8..af6d92cbc2 100644 --- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c @@ -310,7 +310,7 @@ static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port, link = priv->r->get_port_reg_le(priv->r->mac_link_sts); if (link & BIT_ULL(port)) state->link = 1; - pr_info("%s: link state: %llx\n", __func__, link & BIT_ULL(port)); + pr_debug("%s: link state: %llx\n", __func__, link & BIT_ULL(port)); state->duplex = 0; if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port)) diff --git a/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c index 7931daff07..2f678b7384 100644 --- a/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c @@ -855,7 +855,7 @@ static int rtl838x_eth_open(struct net_device *ndev) struct ring_b *ring = priv->membase; int i, err; - pr_info("%s called: RX rings %d(length %d), TX rings %d(length %d)\n", + pr_debug("%s called: RX rings %d(length %d), TX rings %d(length %d)\n", __func__, priv->rxrings, priv->rxringlen, TXRINGS, TXRINGLEN); spin_lock_irqsave(&priv->lock, flags); @@ -1342,7 +1342,7 @@ static void rtl838x_validate(struct phylink_config *config, { __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - pr_info("In %s\n", __func__); + pr_debug("In %s\n", __func__); if (!phy_interface_mode_is_rgmii(state->interface) && state->interface != PHY_INTERFACE_MODE_1000BASEX && @@ -1404,7 +1404,7 @@ static void rtl838x_mac_an_restart(struct phylink_config *config) if (priv->family_id != RTL8380_FAMILY_ID) return; - pr_info("In %s\n", __func__); + pr_debug("In %s\n", __func__); /* Restart by disabling and re-enabling link */ sw_w32(0x6192D, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); mdelay(20); @@ -1419,7 +1419,7 @@ static int rtl838x_mac_pcs_get_state(struct phylink_config *config, struct rtl838x_eth_priv *priv = netdev_priv(dev); int port = priv->cpu_port; - pr_info("In %s\n", __func__); + pr_debug("In %s\n", __func__); state->link = priv->r->get_mac_link_sts(port) ? 1 : 0; state->duplex = priv->r->get_mac_link_dup_sts(port) ? 1 : 0; @@ -1456,7 +1456,7 @@ static void rtl838x_mac_link_down(struct phylink_config *config, struct net_device *dev = container_of(config->dev, struct net_device, dev); struct rtl838x_eth_priv *priv = netdev_priv(dev); - pr_info("In %s\n", __func__); + pr_debug("In %s\n", __func__); /* Stop TX/RX to port */ sw_w32_mask(0x03, 0, priv->r->mac_port_ctrl(priv->cpu_port)); } @@ -1468,7 +1468,7 @@ static void rtl838x_mac_link_up(struct phylink_config *config, unsigned int mode struct net_device *dev = container_of(config->dev, struct net_device, dev); struct rtl838x_eth_priv *priv = netdev_priv(dev); - pr_info("In %s\n", __func__); + pr_debug("In %s\n", __func__); /* Restart TX/RX to port */ sw_w32_mask(0, 0x03, priv->r->mac_port_ctrl(priv->cpu_port)); } @@ -1479,7 +1479,7 @@ static void rtl838x_set_mac_hw(struct net_device *dev, u8 *mac) unsigned long flags; spin_lock_irqsave(&priv->lock, flags); - pr_info("In %s\n", __func__); + pr_debug("In %s\n", __func__); sw_w32((mac[0] << 8) | mac[1], priv->r->mac); sw_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], priv->r->mac + 4); @@ -1547,7 +1547,7 @@ static int rtl838x_get_link_ksettings(struct net_device *ndev, { struct rtl838x_eth_priv *priv = netdev_priv(ndev); - pr_info("%s called\n", __func__); + pr_debug("%s called\n", __func__); return phylink_ethtool_ksettings_get(priv->phylink, cmd); } @@ -1556,7 +1556,7 @@ static int rtl838x_set_link_ksettings(struct net_device *ndev, { struct rtl838x_eth_priv *priv = netdev_priv(ndev); - pr_info("%s called\n", __func__); + pr_debug("%s called\n", __func__); return phylink_ethtool_ksettings_set(priv->phylink, cmd); } @@ -1678,7 +1678,7 @@ static int rtl931x_mdio_write(struct mii_bus *bus, int mii_id, static int rtl838x_mdio_reset(struct mii_bus *bus) { - pr_info("%s called\n", __func__); + pr_debug("%s called\n", __func__); /* Disable MAC polling the PHY so that we can start configuration */ sw_w32(0x00000000, RTL838X_SMI_POLL_CTRL); @@ -1693,7 +1693,7 @@ static int rtl839x_mdio_reset(struct mii_bus *bus) { return 0; - pr_info("%s called\n", __func__); + pr_debug("%s called\n", __func__); /* BUG: The following does not work, but should! */ /* Disable MAC polling the PHY so that we can start configuration */ sw_w32(0x00000000, RTL839X_SMI_PORT_POLLING_CTRL); @@ -1710,7 +1710,7 @@ static int rtl931x_mdio_reset(struct mii_bus *bus) sw_w32(0x00000000, RTL931X_SMI_PORT_POLLING_CTRL); sw_w32(0x00000000, RTL931X_SMI_PORT_POLLING_CTRL + 4); - pr_info("%s called\n", __func__); + pr_debug("%s called\n", __func__); return 0; } @@ -1767,7 +1767,7 @@ static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv) struct device_node *mii_np; int ret; - pr_info("%s called\n", __func__); + pr_debug("%s called\n", __func__); mii_np = of_get_child_by_name(priv->pdev->dev.of_node, "mdio-bus"); if (!mii_np) { @@ -1827,7 +1827,7 @@ err_put_node: static int rtl838x_mdio_remove(struct rtl838x_eth_priv *priv) { - pr_info("%s called\n", __func__); + pr_debug("%s called\n", __func__); if (!priv->mii_bus) return 0; -- cgit v1.2.3