/*
 * Misc useful os-independent macros and functions.
 *
 * Copyright 2006, Broadcom Corporation
 * All Rights Reserved.
 * 
 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
 */

#ifndef	_bcmutils_h_
#define	_bcmutils_h_

/* ** driver/apps-shared section ** */

#define BCME_STRLEN 		64	/* Max string length for BCM errors */
#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))


/*
 * error codes could be added but the defined ones shouldn't be changed/deleted
 * these error codes are exposed to the user code
 * when ever a new error code is added to this list
 * please update errorstring table with the related error string and
 * update osl files with os specific errorcode map
*/

#define BCME_OK				0	/* Success */
#define BCME_ERROR			-1	/* Error generic */
#define BCME_BADARG			-2	/* Bad Argument */
#define BCME_BADOPTION			-3	/* Bad option */
#define BCME_NOTUP			-4	/* Not up */
#define BCME_NOTDOWN			-5	/* Not down */
#define BCME_NOTAP			-6	/* Not AP */
#define BCME_NOTSTA			-7	/* Not STA  */
#define BCME_BADKEYIDX			-8	/* BAD Key Index */
#define BCME_RADIOOFF 			-9	/* Radio Off */
#define BCME_NOTBANDLOCKED		-10	/* Not  band locked */
#define BCME_NOCLK			-11	/* No Clock */
#define BCME_BADRATESET			-12	/* BAD Rate valueset */
#define BCME_BADBAND			-13	/* BAD Band */
#define BCME_BUFTOOSHORT		-14	/* Buffer too short */
#define BCME_BUFTOOLONG			-15	/* Buffer too long */
#define BCME_BUSY			-16	/* Busy */
#define BCME_NOTASSOCIATED		-17	/* Not Associated */
#define BCME_BADSSIDLEN			-18	/* Bad SSID len */
#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel */
#define BCME_BADCHAN			-20	/* Bad Channel */
#define BCME_BADADDR			-21	/* Bad Address */
#define BCME_NORESOURCE			-22	/* Not Enough Resources */
#define BCME_UNSUPPORTED		-23	/* Unsupported */
#define BCME_BADLEN			-24	/* Bad length */
#define BCME_NOTREADY			-25	/* Not Ready */
#define BCME_EPERM			-26	/* Not Permitted */
#define BCME_NOMEM			-27	/* No Memory */
#define BCME_ASSOCIATED			-28	/* Associated */
#define BCME_RANGE			-29	/* Not In Range */
#define BCME_NOTFOUND			-30	/* Not Found */
#define BCME_WME_NOT_ENABLED		-31	/* WME Not Enabled */
#define BCME_TSPEC_NOTFOUND		-32	/* TSPEC Not Found */
#define BCME_ACM_NOTSUPPORTED		-33	/* ACM Not Supported */
#define BCME_NOT_WME_ASSOCIATION	-34	/* Not WME Association */
#define BCME_SDIO_ERROR			-35	/* SDIO Bus Error */
#define BCME_DONGLE_DOWN		-36	/* Dongle Not Accessible */
#define BCME_LAST			BCME_DONGLE_DOWN

/* These are collection of BCME Error strings */
#define BCMERRSTRINGTABLE {		\
	"OK",				\
	"Undefined error",		\
	"Bad Argument",			\
	"Bad Option",			\
	"Not up",			\
	"Not down",			\
	"Not AP",			\
	"Not STA",			\
	"Bad Key Index",		\
	"Radio Off",			\
	"Not band locked",		\
	"No clock",			\
	"Bad Rate valueset",		\
	"Bad Band",			\
	"Buffer too short",		\
	"Buffer too long",		\
	"Busy",				\
	"Not Associated",		\
	"Bad SSID len",			\
	"Out of Range Channel",		\
	"Bad Channel",			\
	"Bad Address",			\
	"Not Enough Resources",		\
	"Unsupported",			\
	"Bad length",			\
	"Not Ready",			\
	"Not Permitted",		\
	"No Memory",			\
	"Associated",			\
	"Not In Range",			\
	"Not Found",			\
	"WME Not Enabled",		\
	"TSPEC Not Found",		\
	"ACM Not Supported",		\
	"Not WME Association",		\
	"SDIO Bus Error",		\
	"Dongle Not Accessible"		\
}

#ifndef ABS
#define	ABS(a)			(((a) < 0)?-(a):(a))
#endif /* ABS */

#ifndef MIN
#define	MIN(a, b)		(((a) < (b))?(a):(b))
#endif /* MIN */

#ifndef MAX
#define	MAX(a, b)		(((a) > (b))?(a):(b))
#endif /* MAX */

#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
#define	ROUNDUP(x, y)		((((x)+((y)-1))/(y))*(y))
#define	ISALIGNED(a, x)		(((a) & ((x)-1)) == 0)
#define	ISPOWEROF2(x)		((((x)-1)&(x)) == 0)
#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
#define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))

/* bit map related macros */
#ifndef setbit
#ifndef NBBY		    /* the BSD family defines NBBY */
#define	NBBY	8	/* 8 bits per byte */
#endif /* #ifndef NBBY */
#define	setbit(a, i)	(((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
#define	clrbit(a, i)	(((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
#define	isset(a, i)	(((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
#define	isclr(a, i)	((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
#endif /* setbit */

#define	NBITS(type)	(sizeof(type) * 8)
#define NBITVAL(nbits)	(1 << (nbits))
#define MAXBITVAL(nbits)	((1 << (nbits)) - 1)
#define	NBITMASK(nbits)	MAXBITVAL(nbits)
#define MAXNBVAL(nbyte)	MAXBITVAL((nbyte) * 8)

/* basic mux operation - can be optimized on several architectures */
#define MUX(pred, true, false) ((pred) ? (true) : (false))

/* modulo inc/dec - assumes x E [0, bound - 1] */
#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)

/* modulo inc/dec, bound = 2^k */
#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))

/* modulo add/sub - assumes x, y E [0, bound - 1] */
#define MODADD(x, y, bound) \
    MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
#define MODSUB(x, y, bound) \
    MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))

/* module add/sub, bound = 2^k */
#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))

/* crc defines */
#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */

/* bcm_format_flags() bit description structure */
typedef struct bcm_bit_desc {
	uint32	bit;
	char*	name;
} bcm_bit_desc_t;

/* tag_ID/length/value_buffer tuple */
typedef struct bcm_tlv {
	uint8	id;
	uint8	len;
	uint8	data[1];
} bcm_tlv_t;

/* Check that bcm_tlv_t fits into the given buflen */
#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))

/* buffer length for ethernet address from bcm_ether_ntoa() */
#define ETHER_ADDR_STR_LEN	18	/* 18-bytes of Ethernet address buffer length */

/* unaligned load and store macros */
#ifdef IL_BIGENDIAN
static INLINE uint32
load32_ua(uint8 *a)
{
	return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
}

static INLINE void
store32_ua(uint8 *a, uint32 v)
{
	a[0] = (v >> 24) & 0xff;
	a[1] = (v >> 16) & 0xff;
	a[2] = (v >> 8) & 0xff;
	a[3] = v & 0xff;
}

static INLINE uint16
load16_ua(uint8 *a)
{
	return ((a[0] << 8) | a[1]);
}

static INLINE void
store16_ua(uint8 *a, uint16 v)
{
	a[0] = (v >> 8) & 0xff;
	a[1] = v & 0xff;
}

#else

static INLINE uint32
load32_ua(uint8 *a)
{
	return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
}

static INLINE void
store32_ua(uint8 *a, uint32 v)
{
	a[3] = (v >> 24) & 0xff;
	a[2] = (v >> 16) & 0xff;
	a[1] = (v >> 8) & 0xff;
	a[0] = v & 0xff;
}

static INLINE uint16
load16_ua(uint8 *a)
{
	return ((a[1] << 8) | a[0]);
}

static INLINE void
store16_ua(uint8 *a, uint16 v)
{
	a[1] = (v >> 8) & 0xff;
	a[0] = v & 0xff;
}

#endif /* IL_BIGENDIAN */

#endif	/* _bcmutils_h_ */