ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom

ath9k_of_init() function[0] was initially written on the assumption that
if someone had an explicit ath9k OF node that "there must be something
wrong, why would someone add an OF node if everything is fine"[1]
(Quoting Martin Blumenstingl)

"it turns out it's not that simple. with your requirements I'm now aware
of two use-cases where the current code in ath9k_of_init() doesn't work
without modifications"[1]

The "your requirements" Martin speaks of is the result of the fact that I
have a device (PowerCloud Systems CR5000) that uses the EEPROM for
caldata and firmware but for which the MAC address is take from the MTD
"art" partition[2], or more succinctly:

"some cards come with a physical EEPROM chip so "qca,no-eeprom" should not
be set (your use-case). in this case AH_USE_EEPROM should be set (which
is the default when there is no OF node)"[1]

The other use case is:

the firmware on some PowerMac G5 seems to add a OF node for the ath9k
card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP
should be unset (which is the default when there is no OF node). see [3]

After this patch to ath9k_of_init() the new behavior will be:

    if there's no OF node then everything is the same as before
    if there's an empty OF node then ath9k will use the hardware EEPROM
      (before ath9k would fail to initialize because no EEPROM data was
      provided by userspace)
    if there's an OF node with only a MAC address then ath9k will use
      the MAC address and the hardware EEPROM (see the case above)
    with "qca,no-eeprom" EEPROM data from userspace will be requested.
      the behavior here will not change
[1]

Martin provides additional background on EEPROM swapping[1] which I have
included in the patch annotation but not the commit message.

Thanks to Christian Lampartar <chunkeey@gmail.com> for all his help on
troubleshooting this issue and the basis for this patch.

Fixes: 138b41253d9c ("ath9k: parse the device configuration from an OF node")

[0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615
[1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058
[2]https://github.com/openwrt/openwrt/pull/1613
[3]https://patchwork.kernel.org/patch/10241731/

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -642,15 +642,15 @@ static int ath9k_of_init(struct ath_soft
 		ret = ath9k_eeprom_request(sc, eeprom_name);
 		if (ret)
 			return ret;
+
+		ah->ah_flags &= ~AH_USE_EEPROM;
+		ah->ah_flags |= AH_NO_EEP_SWAP;
 	}
 
 	mac = of_get_mac_address(np);
 	if (mac)
 		ether_addr_copy(common->macaddr, mac);
 
-	ah->ah_flags &= ~AH_USE_EEPROM;
-	ah->ah_flags |= AH_NO_EEP_SWAP;
-
 	return 0;
 }