From patchwork Sat Sep 17 20:27:10 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Golle X-Patchwork-Id: 12979245 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: Date: Sat, 17 Sep 2022 21:27:10 +0100 From: Daniel Golle To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , Helmut Schaa Cc: Kalle Valo , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Johannes Berg Subject: [PATCH v3 04/16] rt2x00: move up and reuse busy wait functions Message-ID: <3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org Move bbp_ready and rf_ready busy wait functions up in the code so they can more easily be used. Allow specifying register mask in rf_ready function which is useful for calibration routines which will be added in follow-up commits. Signed-off-by: Daniel Golle Acked-by: Stanislaw Gruszka --- .../net/wireless/ralink/rt2x00/rt2800lib.c | 99 +++++++++---------- 1 file changed, 46 insertions(+), 53 deletions(-) --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -2143,6 +2143,48 @@ void rt2800_config_erp(struct rt2x00_dev } EXPORT_SYMBOL_GPL(rt2800_config_erp); +static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev, + const struct rt2x00_field32 mask) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); + if (!rt2x00_get_field32(reg, mask)) + return 0; + + udelay(REGISTER_BUSY_DELAY); + } + + rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n"); + return -EACCES; +} + +static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u8 value; + + /* + * BBP was enabled after firmware was loaded, + * but we need to reactivate it now. + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + msleep(1); + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + value = rt2800_bbp_read(rt2x00dev, 0); + if ((value != 0xff) && (value != 0x00)) + return 0; + udelay(REGISTER_BUSY_DELAY); + } + + rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); + return -EACCES; +} + static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev) { u32 reg; @@ -3799,10 +3841,9 @@ static void rt2800_config_alc(struct rt2 struct ieee80211_channel *chan, int power_level) { u16 eeprom, target_power, max_power; - u32 mac_sys_ctrl, mac_status; + u32 mac_sys_ctrl; u32 reg; u8 bbp; - int i; /* hardware unit is 0.5dBm, limited to 23.5dBm */ power_level *= 2; @@ -3838,16 +3879,8 @@ static void rt2800_config_alc(struct rt2 /* Disable Tx/Rx */ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); /* Check MAC Tx/Rx idle */ - for (i = 0; i < 10000; i++) { - mac_status = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); - if (mac_status & 0x3) - usleep_range(50, 200); - else - break; - } - - if (i == 10000) - rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n"); + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) + rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n"); if (chan->center_freq > 2457) { bbp = rt2800_bbp_read(rt2x00dev, 30); @@ -6249,46 +6282,6 @@ static int rt2800_init_registers(struct return 0; } -static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); - if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) - return 0; - - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n"); - return -EACCES; -} - -static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - /* - * BBP was enabled after firmware was loaded, - * but we need to reactivate it now. - */ - rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - msleep(1); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - value = rt2800_bbp_read(rt2x00dev, 0); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev) { @@ -9110,7 +9103,7 @@ int rt2800_enable_radio(struct rt2x00_de /* * Wait BBP/RF to wake up. */ - if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev))) + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) return -EIO; /*