From a8135d0d79e9d0ad3a4ff494fceeaae838becf38 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:40 +0200 Subject: [PATCH 2/3] dmaengine: core: Introduce new, universal API to request a channel The two API function can cover most, if not all current APIs used to request a channel. With minimal effort dmaengine drivers, platforms and dmaengine user drivers can be converted to use the two function. struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); To request any channel matching with the requested capabilities, can be used to request channel for memcpy, memset, xor, etc where no hardware synchronization is needed. struct dma_chan *dma_request_chan(struct device *dev, const char *name); To request a slave channel. The dma_request_chan() will try to find the channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode it will use a filter lookup table and retrieves the needed information from the dma_slave_map provided by the DMA drivers. This legacy mode needs changes in platform code, in dmaengine drivers and finally the dmaengine user drivers can be converted: For each dmaengine driver an array of DMA device, slave and the parameter for the filter function needs to be added: static const struct dma_slave_map da830_edma_map[] = { { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, }; This information is going to be needed by the dmaengine driver, so modification to the platform_data is needed, and the driver map should be added to the pdata of the DMA driver: da8xx_edma0_pdata.slave_map = da830_edma_map; da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); The DMA driver then needs to configure the needed device -> filter_fn mapping before it registers with dma_async_device_register() : ecc->dma_slave.filter_map.map = info->slave_map; ecc->dma_slave.filter_map.mapcnt = info->slavecnt; ecc->dma_slave.filter_map.fn = edma_filter_fn; When neither DT or ACPI lookup is available the dma_request_chan() will try to match the requester's device name with the filter_map's list of device names, when a match found it will use the information from the dma_slave_map to get the channel with the dma_get_channel() internal function. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- Documentation/dmaengine/client.txt | 23 +++------- drivers/dma/dmaengine.c | 89 +++++++++++++++++++++++++++++++++----- include/linux/dmaengine.h | 51 +++++++++++++++++++--- 3 files changed, 127 insertions(+), 36 deletions(-) diff --git a/Documentation/dmaengine/client.txt b/Documentation/dmaengine/client.txt index 11fb87f..4b04d89 100644 --- a/Documentation/dmaengine/client.txt +++ b/Documentation/dmaengine/client.txt @@ -22,25 +22,14 @@ The slave DMA usage consists of following steps: Channel allocation is slightly different in the slave DMA context, client drivers typically need a channel from a particular DMA controller only and even in some cases a specific channel is desired. - To request a channel dma_request_channel() API is used. + To request a channel dma_request_chan() API is used. Interface: - struct dma_chan *dma_request_channel(dma_cap_mask_t mask, - dma_filter_fn filter_fn, - void *filter_param); - where dma_filter_fn is defined as: - typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param); - - The 'filter_fn' parameter is optional, but highly recommended for - slave and cyclic channels as they typically need to obtain a specific - DMA channel. - - When the optional 'filter_fn' parameter is NULL, dma_request_channel() - simply returns the first channel that satisfies the capability mask. - - Otherwise, the 'filter_fn' routine will be called once for each free - channel which has a capability in 'mask'. 'filter_fn' is expected to - return 'true' when the desired DMA channel is found. + struct dma_chan *dma_request_chan(struct device *dev, const char *name); + + Which will find and return the 'name' DMA channel associated with the 'dev' + device. The association is done via DT, ACPI or board file based + dma_slave_map matching table. A channel allocated via this interface is exclusive to the caller, until dma_release_channel() is called. diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 81a36fc..a094dbb 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -43,6 +43,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -665,27 +666,73 @@ struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, } EXPORT_SYMBOL_GPL(__dma_request_channel); +static const struct dma_slave_map *dma_filter_match(struct dma_device *device, + const char *name, + struct device *dev) +{ + int i; + + if (!device->filter.mapcnt) + return NULL; + + for (i = 0; i < device->filter.mapcnt; i++) { + const struct dma_slave_map *map = &device->filter.map[i]; + + if (!strcmp(map->devname, dev_name(dev)) && + !strcmp(map->slave, name)) + return map; + } + + return NULL; +} + /** - * dma_request_slave_channel_reason - try to allocate an exclusive slave channel + * dma_request_chan - try to allocate an exclusive slave channel * @dev: pointer to client device structure * @name: slave channel name * * Returns pointer to appropriate DMA channel on success or an error pointer. */ -struct dma_chan *dma_request_slave_channel_reason(struct device *dev, - const char *name) +struct dma_chan *dma_request_chan(struct device *dev, const char *name) { + struct dma_device *d, *_d; + struct dma_chan *chan = NULL; + /* If device-tree is present get slave info from here */ if (dev->of_node) - return of_dma_request_slave_channel(dev->of_node, name); + chan = of_dma_request_slave_channel(dev->of_node, name); /* If device was enumerated by ACPI get slave info from here */ - if (ACPI_HANDLE(dev)) - return acpi_dma_request_slave_chan_by_name(dev, name); + if (has_acpi_companion(dev) && !chan) + chan = acpi_dma_request_slave_chan_by_name(dev, name); + + if (chan) { + /* Valid channel found or requester need to be deferred */ + if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) + return chan; + } + + /* Try to find the channel via the DMA filter map(s) */ + mutex_lock(&dma_list_mutex); + list_for_each_entry_safe(d, _d, &dma_device_list, global_node) { + dma_cap_mask_t mask; + const struct dma_slave_map *map = dma_filter_match(d, name, dev); + + if (!map) + continue; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - return ERR_PTR(-ENODEV); + chan = find_candidate(d, &mask, d->filter.fn, map->param); + if (!IS_ERR(chan)) + break; + } + mutex_unlock(&dma_list_mutex); + + return chan ? chan : ERR_PTR(-EPROBE_DEFER); } -EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason); +EXPORT_SYMBOL_GPL(dma_request_chan); /** * dma_request_slave_channel - try to allocate an exclusive slave channel @@ -697,17 +744,35 @@ EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { - struct dma_chan *ch = dma_request_slave_channel_reason(dev, name); + struct dma_chan *ch = dma_request_chan(dev, name); if (IS_ERR(ch)) return NULL; - dma_cap_set(DMA_PRIVATE, ch->device->cap_mask); - ch->device->privatecnt++; - return ch; } EXPORT_SYMBOL_GPL(dma_request_slave_channel); +/** + * dma_request_chan_by_mask - allocate a channel satisfying certain capabilities + * @mask: capabilities that the channel must satisfy + * + * Returns pointer to appropriate DMA channel on success or an error pointer. + */ +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask) +{ + struct dma_chan *chan; + + if (!mask) + return ERR_PTR(-ENODEV); + + chan = __dma_request_channel(mask, NULL, NULL); + if (!chan) + chan = ERR_PTR(-ENODEV); + + return chan; +} +EXPORT_SYMBOL_GPL(dma_request_chan_by_mask); + void dma_release_channel(struct dma_chan *chan) { mutex_lock(&dma_list_mutex); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e..d50a6b51 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -607,11 +607,38 @@ enum dmaengine_alignment { }; /** + * struct dma_slave_map - associates slave device and it's slave channel with + * parameter to be used by a filter function + * @devname: name of the device + * @slave: slave channel name + * @param: opaque parameter to pass to struct dma_filter.fn + */ +struct dma_slave_map { + const char *devname; + const char *slave; + void *param; +}; + +/** + * struct dma_filter - information for slave device/channel to filter_fn/param + * mapping + * @fn: filter function callback + * @mapcnt: number of slave device/channel in the map + * @map: array of channel to filter mapping data + */ +struct dma_filter { + dma_filter_fn fn; + int mapcnt; + const struct dma_slave_map *map; +}; + +/** * struct dma_device - info on the entity supplying DMA services * @chancnt: how many DMA channels are supported * @privatecnt: how many DMA channels are requested by dma_request_channel * @channels: the list of struct dma_chan * @global_node: list_head for global dma_device_list + * @filter: information for device/slave to filter function/param mapping * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability * @max_pq: maximum number of PQ sources and PQ-continue capability @@ -666,6 +693,7 @@ struct dma_device { unsigned int privatecnt; struct list_head channels; struct list_head global_node; + struct dma_filter filter; dma_cap_mask_t cap_mask; unsigned short max_xor; unsigned short max_pq; @@ -1140,9 +1168,11 @@ enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); -struct dma_chan *dma_request_slave_channel_reason(struct device *dev, - const char *name); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); + +struct dma_chan *dma_request_chan(struct device *dev, const char *name); +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); + void dma_release_channel(struct dma_chan *chan); int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps); #else @@ -1166,16 +1196,21 @@ static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, { return NULL; } -static inline struct dma_chan *dma_request_slave_channel_reason( - struct device *dev, const char *name) -{ - return ERR_PTR(-ENODEV); -} static inline struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { return NULL; } +static inline struct dma_chan *dma_request_chan(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENODEV); +} +static inline struct dma_chan *dma_request_chan_by_mask( + const dma_cap_mask_t *mask) +{ + return ERR_PTR(-ENODEV); +} static inline void dma_release_channel(struct dma_chan *chan) { } @@ -1186,6 +1221,8 @@ static inline int dma_get_slave_caps(struct dma_chan *chan, } #endif +#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name) + static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx) { struct dma_slave_caps caps; -- 2.8.1