DEVICE_VARS += SENAO_IMGNAME # This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to # sysupgrade, as otherwise it will implant the old configuration from # OEM firmware when writing rootfs from factory.bin define Build/senao-tar-gz -[ -f "$@" ] && \ mkdir -p $@.tmp && \ touch $@.tmp/failsafe.bin && \ echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \ echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \ $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \ $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \ $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \ $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ -C $@.tmp . | gzip -9n > $@ && \ rm -rf $@.tmp endef define Device/senao_loader_okli KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 LOADER_TYPE := bin COMPILE := loader-$(1).bin loader-$(1).uImage COMPILE/loader-$(1).bin := loader-okli-compile COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \ uImage lzma IMAGES += factory.bin IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \ append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \ check-size | senao-tar-gz $$$$(SENAO_IMGNAME) endef