include ./common-netgear.mk	# for netgear-uImage

# attention: only zlib compression is allowed for the boot fs
define Build/zyxel-buildkerneljffs
	rm -rf  $(KDIR_TMP)/zyxelnbg6716
	mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
	cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
	$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
		--big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
		-o $@ \
		-d $(KDIR_TMP)/zyxelnbg6716/image
	rm -rf $(KDIR_TMP)/zyxelnbg6716
endef

define Build/zyxel-factory
	let \
		maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
		let size="$$(stat -c%s $@)"; \
		if [ $$size -lt $$maxsize ]; then \
			$(STAGING_DIR_HOST)/bin/mkrasimage \
				-b $(RAS_BOARD) \
				-v $(RAS_VERSION) \
				-r $@ \
				-s $$maxsize \
				-o $@.new \
				-l 131072 \
			&& mv $@.new $@ ; \
		fi
endef

define Device/aerohive_hiveap-121
  ATH_SOC := ar9344
  DEVICE_VENDOR := Aerohive
  DEVICE_MODEL := HiveAP 121
  DEVICE_PACKAGES := kmod-usb2
  BLOCKSIZE := 128k
  PAGESIZE := 2048
  IMAGE_SIZE := 116m
  KERNEL_SIZE := 5120k
  UBINIZE_OPTS := -E 5
  SUPPORTED_DEVICES += hiveap-121
  IMAGES += factory.bin
  IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += aerohive_hiveap-121

define Device/glinet_gl-ar300m-nand
  ATH_SOC := qca9531
  DEVICE_VENDOR := GL.iNet
  DEVICE_MODEL := GL-AR300M
  DEVICE_VARIANT := NAND
  DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport
  KERNEL_SIZE := 2048k
  BLOCKSIZE := 128k
  PAGESIZE := 2048
  VID_HDR_OFFSET := 512
  IMAGES += factory.ubi
  IMAGE/sysupgrade.bin := sysupgrade-tar
  IMAGE/factory.ubi := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
endef
TARGET_DEVICES += glinet_gl-ar300m-nand

# fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff)
define Device/netgear_ath79_nand
  DEVICE_VENDOR := NETGEAR
  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
  KERNEL_SIZE := 2048k
  BLOCKSIZE := 128k
  PAGESIZE := 2048
  IMAGE_SIZE := 25600k
  KERNEL := kernel-bin | append-dtb | lzma -d20 | \
	pad-offset $$(KERNEL_SIZE) 129 | \
	netgear-uImage lzma | append-string -e '\xff' | \
	append-uImage-fakehdr filesystem $$(NETGEAR_KERNEL_MAGIC)
  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
  IMAGES := sysupgrade.bin factory.img
  IMAGE/factory.img := append-kernel | append-ubi | netgear-dni | check-size $$$$(IMAGE_SIZE)
  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size $$$$(IMAGE_SIZE)
  UBINIZE_OPTS := -E 5
endef

define Device/netgear_wndr4300
  ATH_SOC := ar9344
  DEVICE_MODEL := WNDR4300
  NETGEAR_KERNEL_MAGIC := 0x33373033
  NETGEAR_BOARD_ID := WNDR4300
  NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
  SUPPORTED_DEVICES += wndr4300
  $(Device/netgear_ath79_nand)
endef
TARGET_DEVICES += netgear_wndr4300

define Device/zyxel_nbg6716
  ATH_SOC := qca9558
  DEVICE_VENDOR := ZyXEL
  DEVICE_MODEL := NBG6716
  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
  RAS_BOARD := NBG6716
  RAS_ROOTFS_SIZE := 29696k
  RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
  KERNEL_SIZE := 4096k
  BLOCKSIZE := 128k
  PAGESIZE := 2048
  KERNEL := kernel-bin | append-dtb | uImage none | \
	zyxel-buildkerneljffs | check-size 4096k
  IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
  IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
  IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
  IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | zyxel-factory
  UBINIZE_OPTS := -E 5
endef
TARGET_DEVICES += zyxel_nbg6716
DEVICE_VARS += RAS_ROOTFS_SIZE RAS_BOARD RAS_VERSION