From b1e290ec968186530ec59479adfba89d2cfe21c8 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean <olteanv@gmail.com> Date: Sun, 24 Mar 2019 00:18:46 +0200 Subject: [PATCH] net: phy: bcm54xx: Encode link speed and activity into LEDs Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- drivers/net/phy/broadcom.c | 13 +++++++++++++ include/linux/brcmphy.h | 16 ++++++++++++++++ 2 files changed, 29 insertions(+) --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -345,6 +345,19 @@ static int bcm54xx_config_init(struct ph bcm54xx_phydsp_config(phydev); + /* Encode link speed into LED1 and LED3 pair (green/amber). + * Also flash these two LEDs on activity. This means configuring + * them for MULTICOLOR and encoding link/activity into them. + */ + val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) | + BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1); + bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val); + + val = BCM_LED_MULTICOLOR_IN_PHASE | + BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) | + BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT); + bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val); + return 0; } --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -148,6 +148,22 @@ #define BCM_LED_SRC_OFF 0xe /* Tied high */ #define BCM_LED_SRC_ON 0xf /* Tied low */ +/* + * Broadcom Multicolor LED configurations (expansion register 4) + */ +#define BCM_EXP_MULTICOLOR (MII_BCM54XX_EXP_SEL_ER + 0x04) +#define BCM_LED_MULTICOLOR_IN_PHASE BIT(8) +#define BCM_LED_MULTICOLOR_LINK_ACT 0x0 +#define BCM_LED_MULTICOLOR_SPEED 0x1 +#define BCM_LED_MULTICOLOR_ACT_FLASH 0x2 +#define BCM_LED_MULTICOLOR_FDX 0x3 +#define BCM_LED_MULTICOLOR_OFF 0x4 +#define BCM_LED_MULTICOLOR_ON 0x5 +#define BCM_LED_MULTICOLOR_ALT 0x6 +#define BCM_LED_MULTICOLOR_FLASH 0x7 +#define BCM_LED_MULTICOLOR_LINK 0x8 +#define BCM_LED_MULTICOLOR_ACT 0x9 +#define BCM_LED_MULTICOLOR_PROGRAM 0xa /* * BCM5482: Shadow registers