From 104dcc1aff0ae5509ad9875c11e3e0d8c290709d Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Tue, 2 Jun 2020 17:19:51 +0100 Subject: [PATCH] ARM: dts: Add bcm2711-rpi-cm4.dts Add initial DTS file for Compute Module 4. Signed-off-by: Phil Elwell --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 586 ++++++++++++++++++++++++++ arch/arm/boot/dts/overlays/README | 6 + 3 files changed, 594 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dts --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -12,7 +12,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2710-rpi-3-b.dtb \ bcm2711-rpi-4-b.dtb \ bcm2710-rpi-3-b-plus.dtb \ - bcm2710-rpi-cm3.dtb + bcm2710-rpi-cm3.dtb \ + bcm2711-rpi-cm4.dtb dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts @@ -0,0 +1,586 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; + model = "Raspberry Pi Compute Module 4"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0>; + }; + + aliases { + ethernet0 = &genet; + }; + + leds { + act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + status = "okay"; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "ANT1", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + "ANT2"; + status = "okay"; + + ant1: ant1 { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; + output-high; + }; + + ant2: ant2 { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; + status = "okay"; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* EMMC2 is used to drive the SD card */ +&emmc2 { + vqmmc-supply = <&sd_io_1v8_reg>; + broken-cd; + status = "okay"; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@1 { + /* No PHY interrupt */ + reg = <0x1>; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&vchiq { + interrupts = ; +}; + +&vc4 { + status = "okay"; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve3 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&ddc0 { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + +// ============================================= +// Downstream rpi- changes + +#include "bcm270x.dtsi" + +/ { + soc { + /delete-node/ pixelvalve@7e807000; + /delete-node/ hdmi@7e902000; + }; +}; + +#include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-csi1-2lane.dtsi" +#include "bcm283x-rpi-i2c0mux_0_44.dtsi" + +/delete-node/ &emmc2; + +/ { + chosen { + bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1"; + }; + + aliases { + serial0 = &uart1; + serial1 = &uart0; + mmc0 = &emmc2; + mmc1 = &mmcnr; + mmc2 = &sdhost; + /delete-property/ i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + /delete-property/ ethernet; + /delete-property/ intc; + pcie0 = &pcie0; + emmc2bus = &emmc2bus; + }; + + emmc2bus: emmc2bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; + dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; + + emmc2: emmc2@7e340000 { + compatible = "brcm,bcm2711-emmc2"; + status = "okay"; + interrupts = ; + clocks = <&clocks BCM2711_CLOCK_EMMC2>; + reg = <0x0 0x7e340000 0x100>; + vqmmc-supply = <&sd_io_1v8_reg>; + broken-cd; + }; + }; + + /delete-node/ wifi-pwrseq; +}; + +&mmcnr { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins &bt_pins>; + status = "okay"; + + /delete-node/ bluetooth; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins &spi0_cs_pins>; + cs-gpios = <&gpio 8 1>, <&gpio 7 1>; + + spidev0: spidev@0{ + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + }; + + spidev1: spidev@1{ + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + }; +}; + +&gpio { + spi0_pins: spi0_pins { + brcm,pins = <9 10 11>; + brcm,function = ; + }; + + spi0_cs_pins: spi0_cs_pins { + brcm,pins = <8 7>; + brcm,function = ; + }; + + spi3_pins: spi3_pins { + brcm,pins = <1 2 3>; + brcm,function = ; + }; + + spi3_cs_pins: spi3_cs_pins { + brcm,pins = <0 24>; + brcm,function = ; + }; + + spi4_pins: spi4_pins { + brcm,pins = <5 6 7>; + brcm,function = ; + }; + + spi4_cs_pins: spi4_cs_pins { + brcm,pins = <4 25>; + brcm,function = ; + }; + + spi5_pins: spi5_pins { + brcm,pins = <13 14 15>; + brcm,function = ; + }; + + spi5_cs_pins: spi5_cs_pins { + brcm,pins = <12 26>; + brcm,function = ; + }; + + spi6_pins: spi6_pins { + brcm,pins = <19 20 21>; + brcm,function = ; + }; + + spi6_cs_pins: spi6_cs_pins { + brcm,pins = <18 27>; + brcm,function = ; + }; + + i2c0_pins: i2c0 { + brcm,pins = <0 1>; + brcm,function = ; + brcm,pull = ; + }; + + i2c1_pins: i2c1 { + brcm,pins = <2 3>; + brcm,function = ; + brcm,pull = ; + }; + + i2c3_pins: i2c3 { + brcm,pins = <4 5>; + brcm,function = ; + brcm,pull = ; + }; + + i2c4_pins: i2c4 { + brcm,pins = <8 9>; + brcm,function = ; + brcm,pull = ; + }; + + i2c5_pins: i2c5 { + brcm,pins = <12 13>; + brcm,function = ; + brcm,pull = ; + }; + + i2c6_pins: i2c6 { + brcm,pins = <22 23>; + brcm,function = ; + brcm,pull = ; + }; + + i2s_pins: i2s { + brcm,pins = <18 19 20 21>; + brcm,function = ; + }; + + sdio_pins: sdio_pins { + brcm,pins = <34 35 36 37 38 39>; + brcm,function = ; // alt3 = SD1 + brcm,pull = <0 2 2 2 2 2>; + }; + + bt_pins: bt_pins { + brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 + // to fool pinctrl + brcm,function = <0>; + brcm,pull = <2>; + }; + + uart0_pins: uart0_pins { + brcm,pins = <32 33>; + brcm,function = ; + brcm,pull = <0 2>; + }; + + uart1_pins: uart1_pins { + brcm,pins; + brcm,function; + brcm,pull; + }; + + uart2_pins: uart2_pins { + brcm,pins = <0 1>; + brcm,function = ; + brcm,pull = <0 2>; + }; + + uart3_pins: uart3_pins { + brcm,pins = <4 5>; + brcm,function = ; + brcm,pull = <0 2>; + }; + + uart4_pins: uart4_pins { + brcm,pins = <8 9>; + brcm,function = ; + brcm,pull = <0 2>; + }; + + uart5_pins: uart5_pins { + brcm,pins = <12 13>; + brcm,function = ; + brcm,pull = <0 2>; + }; +}; + +&i2c0if { + clock-frequency = <100000>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&i2s_pins>; +}; + +/ { + __overrides__ { + /delete-property/ i2c2_baudrate; + /delete-property/ i2c2_iknowwhatimdoing; + }; +}; + +// ============================================= +// Board specific stuff here + +/ { + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&sdhost { + status = "disabled"; +}; + +&emmc2 { + vmmc-supply = <&sd_vcc_reg>; + bus-width = <8>; +}; + +&phy1 { + led-modes = <0x00 0x08>; /* link/activity link */ +}; + +&gpio { + audio_pins: audio_pins { + brcm,pins = <40 41>; + brcm,function = <4>; + }; +}; + +&leds { + act_led: act { + label = "led0"; + linux,default-trigger = "mmc0"; + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + pwr_led: pwr { + label = "led1"; + linux,default-trigger = "default-on"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; +}; + +&pwm1 { + status = "disabled"; +}; + +&audio { + pinctrl-names = "default"; + pinctrl-0 = <&audio_pins>; +}; + +&vc4 { + status = "disabled"; +}; + +&pixelvalve0 { + status = "disabled"; +}; + +&pixelvalve1 { + status = "disabled"; +}; + +&pixelvalve2 { + status = "disabled"; +}; + +&pixelvalve3 { + status = "disabled"; +}; + +&pixelvalve4 { + status = "disabled"; +}; + +&hdmi0 { + status = "disabled"; +}; + +&ddc0 { + status = "disabled"; +}; + +&hdmi1 { + status = "disabled"; +}; + +&ddc1 { + status = "disabled"; +}; + +/ { + __overrides__ { + act_led_gpio = <&act_led>,"gpios:4"; + act_led_activelow = <&act_led>,"gpios:8"; + act_led_trigger = <&act_led>,"linux,default-trigger"; + + pwr_led_gpio = <&pwr_led>,"gpios:4"; + pwr_led_activelow = <&pwr_led>,"gpios:8"; + pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; + + eth_led0 = <&phy1>,"led-modes:0"; + eth_led1 = <&phy1>,"led-modes:4"; + + ant1 = <&ant1>,"output-high?=on", + <&ant1>, "output-low?=off", + <&ant2>, "output-high?=off", + <&ant2>, "output-low?=on"; + ant2 = <&ant1>,"output-high?=off", + <&ant1>, "output-low?=on", + <&ant2>, "output-high?=on", + <&ant2>, "output-low?=off"; + noant = <&ant1>,"output-high?=off", + <&ant1>, "output-low?=on", + <&ant2>, "output-high?=off", + <&ant2>, "output-low?=on"; + + spi_dma4 = <&spi0>, "dmas:0=", <&dma40>, + <&spi0>, "dmas:8=", <&dma40>; + }; +}; --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -92,6 +92,12 @@ Name: Info: Configures the base Raspberry Pi hardware Load: Params: + ant1 Select antenna 1 (default). CM4 only. + + ant2 Select antenna 2. CM4 only. + + noant Disable both antennas. CM4 only. + audio Set to "on" to enable the onboard ALSA audio interface (default "off")