From 05ba3df09751ff516de5d862c98f5a979b51bb56 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Thu, 25 Jun 2020 16:52:14 +0100 Subject: [PATCH] media: dt-bindings: media: i2c: Add mono version to IMX290 bindings The IMX290 module is available as either monochrome or colour and the variant is not detectable at runtime. Add a new compatible string for the monochrome version. Signed-off-by: Dave Stevenson --- Documentation/devicetree/bindings/media/i2c/imx290.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- a/Documentation/devicetree/bindings/media/i2c/imx290.txt +++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt @@ -1,13 +1,14 @@ * Sony IMX290 1/2.8-Inch CMOS Image Sensor The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with -Square Pixel for Color Cameras. It is programmable through I2C and 4-wire -interfaces. The sensor output is available via CMOS logic parallel SDR output, +Square Pixel for Color or Monochrome Cameras. It is programmable through I2C +and 4-wire interfaces. +The sensor output is available via CMOS logic parallel SDR output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default. No bindings have been defined for the other busses. Required Properties: -- compatible: Should be "sony,imx290" +- compatible: Should be "sony,imx290", or "sony,imx290-mono" - reg: I2C bus address of the device - clocks: Reference to the xclk clock. - clock-names: Should be "xclk".