From 572fe7f4e008792e3f14822d5ddddb37c86329fe Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 5 Nov 2020 09:54:33 +0000 Subject: [PATCH] overlays: Complete the sdtweak excision Signed-off-by: Phil Elwell --- arch/arm/boot/dts/overlays/Makefile | 1 - arch/arm/boot/dts/overlays/README | 27 ++++----------------------- 2 files changed, 4 insertions(+), 24 deletions(-) --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -159,7 +159,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ sc16is752-spi1.dtbo \ sdhost.dtbo \ sdio.dtbo \ - sdtweak.dtbo \ sh1106-spi.dtbo \ smi.dtbo \ smi-dev.dtbo \ --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -2407,29 +2407,10 @@ Load: Name: sdtweak -Info: Tunes the bcm2835-sdhost SD/MMC driver - N.B. This functionality is now available via the sd_* dtparams in the - base DTB. -Load: dtoverlay=sdtweak,= -Params: overclock_50 Clock (in MHz) to use when the MMC framework - requests 50MHz - - force_pio Disable DMA support (default off) - - pio_limit Number of blocks above which to use DMA - (default 1) - - debug Enable debug output (default off) - - poll_once Looks for a card once after booting. Useful - for network booting scenarios to avoid the - overhead of continuous polling. N.B. Using - this option restricts the system to using a - single card per boot (or none at all). - (default off) - - enable Set to off to completely disable the interface - (default on) +Info: This overlay is now deprecated. Use the sd_* dtparams in the + base DTB, e.g. "dtoverlay=sdtweak,poll_once" becomes + "dtparam=sd_poll_once". +Load: Name: sh1106-spi