From 060db9ab233a8d887adfbfa0dc4357b620d8182e Mon Sep 17 00:00:00 2001 From: Annaliese McDermond Date: Sat, 8 Jun 2019 10:14:43 -0700 Subject: [PATCH 518/773] i2c: bcm2835: Model Divider in CCF Commit bebff81fb8b9216eb4fba22cf910553621ae3477 upstream. Model the I2C bus clock divider as a part of the Core Clock Framework. Primarily this removes the clk_get_rate() call from each transfer. This call causes problems for slave drivers that themselves have internal clock components that are controlled by an I2C interface. When the slave's internal clock component is prepared, the prepare lock is obtained, and it makes calls to the I2C subsystem to command the hardware to activate the clock. In order to perform the I2C transfer, this driver sets the divider, which requires it to get the parent clock rate, which it does with clk_get_rate(). Unfortunately, this function will try to take the clock prepare lock, which is already held by the slave's internal clock calls creating a deadlock. Modeling the divider in the CCF natively removes this dependency and the divider value is only set upon changing the bus clock frequency or changes in the parent clock that cascade down to this divisor. This obviates the need to set the divider with every transfer and avoids the deadlock described above. It also should provide better clock debugging and save a few cycles on each transfer due to not having to recalcuate the divider value. Signed-off-by: Annaliese McDermond Acked-by: Stefan Wahren Reviewed-by: Eric Anholt Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm2835.c | 145 ++++++++++++++++++++++++------- 1 file changed, 114 insertions(+), 31 deletions(-) --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -12,6 +12,8 @@ */ #include +#include +#include #include #include #include @@ -71,9 +73,7 @@ struct bcm2835_debug { struct bcm2835_i2c_dev { struct device *dev; void __iomem *regs; - struct clk *clk; int irq; - u32 bus_clk_rate; struct i2c_adapter adapter; struct completion completion; struct i2c_msg *curr_msg; @@ -164,12 +164,17 @@ static inline u32 bcm2835_i2c_readl(stru return readl(i2c_dev->regs + reg); } -static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) +#define to_clk_bcm2835_i2c(_hw) container_of(_hw, struct clk_bcm2835_i2c, hw) +struct clk_bcm2835_i2c { + struct clk_hw hw; + struct bcm2835_i2c_dev *i2c_dev; +}; + +static int clk_bcm2835_i2c_calc_divider(unsigned long rate, + unsigned long parent_rate) { - u32 divider, redl, fedl; + u32 divider = DIV_ROUND_UP(parent_rate, rate); - divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), - i2c_dev->bus_clk_rate); /* * Per the datasheet, the register is always interpreted as an even * number, by rounding down. In other words, the LSB is ignored. So, @@ -178,12 +183,23 @@ static int bcm2835_i2c_set_divider(struc if (divider & 1) divider++; if ((divider < BCM2835_I2C_CDIV_MIN) || - (divider > BCM2835_I2C_CDIV_MAX)) { - dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n"); + (divider > BCM2835_I2C_CDIV_MAX)) return -EINVAL; - } - bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); + return divider; +} + +static int clk_bcm2835_i2c_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); + u32 redl, fedl; + u32 divider = clk_bcm2835_i2c_calc_divider(rate, parent_rate); + + if (divider == -EINVAL) + return -EINVAL; + + bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DIV, divider); /* * Number of core clocks to wait after falling edge before @@ -198,12 +214,62 @@ static int bcm2835_i2c_set_divider(struc */ redl = max(divider / 4, 1u); - bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DEL, + bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DEL, (fedl << BCM2835_I2C_FEDL_SHIFT) | (redl << BCM2835_I2C_REDL_SHIFT)); return 0; } +static long clk_bcm2835_i2c_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + u32 divider = clk_bcm2835_i2c_calc_divider(rate, *parent_rate); + + return DIV_ROUND_UP(*parent_rate, divider); +} + +static unsigned long clk_bcm2835_i2c_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); + u32 divider = bcm2835_i2c_readl(div->i2c_dev, BCM2835_I2C_DIV); + + return DIV_ROUND_UP(parent_rate, divider); +} + +static const struct clk_ops clk_bcm2835_i2c_ops = { + .set_rate = clk_bcm2835_i2c_set_rate, + .round_rate = clk_bcm2835_i2c_round_rate, + .recalc_rate = clk_bcm2835_i2c_recalc_rate, +}; + +static struct clk *bcm2835_i2c_register_div(struct device *dev, + const char *mclk_name, + struct bcm2835_i2c_dev *i2c_dev) +{ + struct clk_init_data init; + struct clk_bcm2835_i2c *priv; + char name[32]; + + snprintf(name, sizeof(name), "%s_div", dev_name(dev)); + + init.ops = &clk_bcm2835_i2c_ops; + init.name = name; + init.parent_names = (const char* []) { mclk_name }; + init.num_parents = 1; + init.flags = 0; + + priv = devm_kzalloc(dev, sizeof(struct clk_bcm2835_i2c), GFP_KERNEL); + if (priv == NULL) + return ERR_PTR(-ENOMEM); + + priv->hw.init = &init; + priv->i2c_dev = i2c_dev; + + clk_hw_register_clkdev(&priv->hw, "div", dev_name(dev)); + return devm_clk_register(dev, &priv->hw); +} + static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) { u32 val; @@ -363,7 +429,7 @@ static int bcm2835_i2c_xfer(struct i2c_a { struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); unsigned long time_left; - int i, ret; + int i; if (debug) i2c_dev->debug_num_msgs = num; @@ -379,10 +445,6 @@ static int bcm2835_i2c_xfer(struct i2c_a return -EOPNOTSUPP; } - ret = bcm2835_i2c_set_divider(i2c_dev); - if (ret) - return ret; - i2c_dev->curr_msg = msgs; i2c_dev->num_msgs = num; reinit_completion(&i2c_dev->completion); @@ -443,6 +505,9 @@ static int bcm2835_i2c_probe(struct plat struct resource *mem, *irq; int ret; struct i2c_adapter *adap; + const char *mclk_name; + struct clk *bus_clk; + u32 bus_clk_rate; i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); if (!i2c_dev) @@ -456,21 +521,6 @@ static int bcm2835_i2c_probe(struct plat if (IS_ERR(i2c_dev->regs)) return PTR_ERR(i2c_dev->regs); - i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(i2c_dev->clk)) { - if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER) - dev_err(&pdev->dev, "Could not get clock\n"); - return PTR_ERR(i2c_dev->clk); - } - - ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &i2c_dev->bus_clk_rate); - if (ret < 0) { - dev_warn(&pdev->dev, - "Could not read clock-frequency property\n"); - i2c_dev->bus_clk_rate = 100000; - } - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq) { dev_err(&pdev->dev, "No IRQ resource\n"); @@ -485,6 +535,35 @@ static int bcm2835_i2c_probe(struct plat return -ENODEV; } + mclk_name = of_clk_get_parent_name(pdev->dev.of_node, 0); + + bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk_name, i2c_dev); + + if (IS_ERR(bus_clk)) { + dev_err(&pdev->dev, "Could not register clock\n"); + return PTR_ERR(bus_clk); + } + + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &bus_clk_rate); + if (ret < 0) { + dev_warn(&pdev->dev, + "Could not read clock-frequency property\n"); + bus_clk_rate = 100000; + } + + ret = clk_set_rate_exclusive(bus_clk, bus_clk_rate); + if (ret < 0) { + dev_err(&pdev->dev, "Could not set clock frequency\n"); + return ret; + } + + ret = clk_prepare_enable(bus_clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't prepare clock"); + return ret; + } + adap = &i2c_dev->adapter; i2c_set_adapdata(adap, i2c_dev); adap->owner = THIS_MODULE; @@ -507,6 +586,10 @@ static int bcm2835_i2c_probe(struct plat static int bcm2835_i2c_remove(struct platform_device *pdev) { struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + struct clk *bus_clk = devm_clk_get(i2c_dev->dev, "div"); + + clk_rate_exclusive_put(bus_clk); + clk_disable_unprepare(bus_clk); free_irq(i2c_dev->irq, i2c_dev); i2c_del_adapter(&i2c_dev->adapter);