From 40b5d2f15c091fa9c854acde91ad2acb504027d7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= Date: Mon, 12 Apr 2021 08:50:31 +0200 Subject: [PATCH] net: dsa: mt7530: Add support for EEE features MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds EEE support. Signed-off-by: René van Dorst Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 43 ++++++++++++++++++++++++++++++++++++++++ drivers/net/dsa/mt7530.h | 14 ++++++++++++- 2 files changed, 56 insertions(+), 1 deletion(-) --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2269,6 +2269,17 @@ static void mt753x_phylink_mac_link_up(s mcr |= PMCR_RX_FC_EN; } + if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) { + switch (speed) { + case SPEED_1000: + mcr |= PMCR_FORCE_EEE1G; + break; + case SPEED_100: + mcr |= PMCR_FORCE_EEE100; + break; + } + } + mt7530_set(priv, MT7530_PMCR_P(port), mcr); } @@ -2499,6 +2510,36 @@ mt753x_phy_write(struct dsa_switch *ds, return priv->info->phy_write(ds, port, regnum, val); } +static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct mt7530_priv *priv = ds->priv; + u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port)); + + e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN); + e->tx_lpi_timer = GET_LPI_THRESH(eeecr); + + return 0; +} + +static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct mt7530_priv *priv = ds->priv; + u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; + + if (e->tx_lpi_timer > 0xFFF) + return -EINVAL; + + set = SET_LPI_THRESH(e->tx_lpi_timer); + if (!e->tx_lpi_enabled) + /* Force LPI Mode without a delay */ + set |= LPI_MODE_EN; + mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set); + + return 0; +} + static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, @@ -2527,6 +2568,8 @@ static const struct dsa_switch_ops mt753 .phylink_mac_an_restart = mt753x_phylink_mac_an_restart, .phylink_mac_link_down = mt753x_phylink_mac_link_down, .phylink_mac_link_up = mt753x_phylink_mac_link_up, + .get_mac_eee = mt753x_get_mac_eee, + .set_mac_eee = mt753x_set_mac_eee, }; static const struct mt753x_info mt753x_table[] = { --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -240,6 +240,8 @@ enum mt7530_vlan_port_attr { #define PMCR_RX_EN BIT(13) #define PMCR_BACKOFF_EN BIT(9) #define PMCR_BACKPR_EN BIT(8) +#define PMCR_FORCE_EEE1G BIT(7) +#define PMCR_FORCE_EEE100 BIT(6) #define PMCR_TX_FC_EN BIT(5) #define PMCR_RX_FC_EN BIT(4) #define PMCR_FORCE_SPEED_1000 BIT(3) @@ -264,7 +266,8 @@ enum mt7530_vlan_port_attr { #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ - PMCR_FORCE_FDX | PMCR_FORCE_LNK) + PMCR_FORCE_FDX | PMCR_FORCE_LNK | \ + PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100) #define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \ PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ @@ -273,6 +276,15 @@ enum mt7530_vlan_port_attr { PMCR_FORCE_SPEED_1000 | \ PMCR_FORCE_FDX | PMCR_FORCE_LNK) +#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100) +#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24) +#define WAKEUP_TIME_100(x) (((x) & 0xFF) << 16) +#define LPI_THRESH_MASK GENMASK(15, 4) +#define LPI_THRESH_SHT 4 +#define SET_LPI_THRESH(x) (((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK) +#define GET_LPI_THRESH(x) (((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT) +#define LPI_MODE_EN BIT(0) + #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) #define PMSR_EEE1G BIT(7) #define PMSR_EEE100M BIT(6)