From 04e9ab75267489224364fa510a88ada83e11c325 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 10 Dec 2020 18:23:52 +0100 Subject: [PATCH] dt-bindings: mtd: convert "fixed-partitions" to the json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This standardizes its documentation, allows validating with Makefile checks and helps writing DTS files. Noticeable changes: 1. Dropped "Partitions can be represented by sub-nodes of a flash device." as we also support subpartitions (don't have to be part of flash device node) 2. Dropped "to Linux" as bindings are meant to be os agnostic. Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20201210172352.31632-1-zajec5@gmail.com Signed-off-by: Rob Herring --- .../devicetree/bindings/mtd/partition.txt | 131 +-------------- .../mtd/partitions/fixed-partitions.yaml | 152 ++++++++++++++++++ 2 files changed, 154 insertions(+), 129 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -24,137 +24,10 @@ another partitioning method. Available bindings are listed in the "partitions" subdirectory. -Fixed Partitions -================ - -Partitions can be represented by sub-nodes of a flash device. This can be used -on platforms which have strong conventions about which portions of a flash are -used for what purposes, but which don't use an on-flash partition table such -as RedBoot. - -The partition table should be a subnode of the flash node and should be named -'partitions'. This node should have the following property: -- compatible : (required) must be "fixed-partitions" -Partitions are then defined in subnodes of the partitions node. +Deprecated: partitions defined in flash node +============================================ For backwards compatibility partitions as direct subnodes of the flash device are supported. This use is discouraged. NOTE: also for backwards compatibility, direct subnodes that have a compatible string are not considered partitions, as they may be used for other bindings. - -#address-cells & #size-cells must both be present in the partitions subnode of the -flash device. There are two valid values for both: -<1>: for partitions that require a single 32-bit cell to represent their - size/address (aka the value is below 4 GiB) -<2>: for partitions that require two 32-bit cells to represent their - size/address (aka the value is 4 GiB or greater). - -Required properties: -- reg : The partition's offset and size within the flash - -Optional properties: -- label : The label / name for this partition. If omitted, the label is taken - from the node name (excluding the unit address). -- read-only : This parameter, if present, is a hint to Linux that this - partition should only be mounted read-only. This is usually used for flash - partitions containing early-boot firmware images or data which should not be - clobbered. -- lock : Do not unlock the partition at initialization time (not supported on - all devices) -- slc-mode: This parameter, if present, allows one to emulate SLC mode on a - partition attached to an MLC NAND thus making this partition immune to - paired-pages corruptions - -Examples: - - -flash@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - uimage@100000 { - reg = <0x0100000 0x200000>; - }; - }; -}; - -flash@1 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <2>; - - /* a 4 GiB partition */ - partition@0 { - label = "filesystem"; - reg = <0x00000000 0x1 0x00000000>; - }; - }; -}; - -flash@2 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <2>; - #size-cells = <2>; - - /* an 8 GiB partition */ - partition@0 { - label = "filesystem #1"; - reg = <0x0 0x00000000 0x2 0x00000000>; - }; - - /* a 4 GiB partition */ - partition@200000000 { - label = "filesystem #2"; - reg = <0x2 0x00000000 0x1 0x00000000>; - }; - }; -}; - -flash@3 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bootloader"; - reg = <0x000000 0x100000>; - read-only; - }; - - firmware@100000 { - label = "firmware"; - reg = <0x100000 0xe00000>; - compatible = "brcm,trx"; - }; - - calibration@f00000 { - label = "calibration"; - reg = <0xf00000 0x100000>; - compatible = "fixed-partitions"; - ranges = <0 0xf00000 0x100000>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "wifi0"; - reg = <0x000000 0x080000>; - }; - - partition@80000 { - label = "wifi1"; - reg = <0x080000 0x080000>; - }; - }; - }; -}; --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fixed partitions + +description: | + This binding can be used on platforms which have strong conventions about + which portions of a flash are used for what purposes, but which don't use an + on-flash partition table such as RedBoot. + + The partition table should be a node named "partitions". Partitions are then + defined as subnodes. + +maintainers: + - Rafał Miłecki + +properties: + compatible: + const: fixed-partitions + + "#address-cells": true + + "#size-cells": true + +patternProperties: + "@[0-9a-f]+$": + description: node describing a single flash partition + type: object + + properties: + reg: + description: partition's offset and size within the flash + maxItems: 1 + + label: + description: The label / name for this partition. If omitted, the label + is taken from the node name (excluding the unit address). + + read-only: + description: This parameter, if present, is a hint that this partition + should only be mounted read-only. This is usually used for flash + partitions containing early-boot firmware images or data which should + not be clobbered. + type: boolean + + lock: + description: Do not unlock the partition at initialization time (not + supported on all devices) + type: boolean + + slc-mode: + description: This parameter, if present, allows one to emulate SLC mode + on a partition attached to an MLC NAND thus making this partition + immune to paired-pages corruptions + type: boolean + + required: + - reg + +required: + - "#address-cells" + - "#size-cells" + +additionalProperties: true + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + uimage@100000 { + reg = <0x0100000 0x200000>; + }; + }; + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <2>; + + /* a 4 GiB partition */ + partition@0 { + label = "filesystem"; + reg = <0x00000000 0x1 0x00000000>; + }; + }; + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <2>; + #size-cells = <2>; + + /* an 8 GiB partition */ + partition@0 { + label = "filesystem #1"; + reg = <0x0 0x00000000 0x2 0x00000000>; + }; + + /* a 4 GiB partition */ + partition@200000000 { + label = "filesystem #2"; + reg = <0x2 0x00000000 0x1 0x00000000>; + }; + }; + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x100000>; + read-only; + }; + + firmware@100000 { + compatible = "brcm,trx"; + label = "firmware"; + reg = <0x100000 0xe00000>; + }; + + calibration@f00000 { + compatible = "fixed-partitions"; + label = "calibration"; + reg = <0xf00000 0x100000>; + ranges = <0 0xf00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "wifi0"; + reg = <0x000000 0x080000>; + }; + + partition@80000 { + label = "wifi1"; + reg = <0x080000 0x080000>; + }; + }; + };