From: Russell King Bcc: linux@mail.armlinux.org.uk Cc: linux-i2c@vger.kernel.org Subject: [PATCH 04/17] i2c: pxa: re-arrange functions to flow better MIME-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="utf-8" Re-arrange the PXA I2C code to avoid forward declarations, and keep similar functionality (e.g. the non-IRQ mode support) together. This improves code readability. Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pxa.c | 325 +++++++++++++++++------------------ 1 file changed, 162 insertions(+), 163 deletions(-) --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -326,7 +326,6 @@ static void i2c_pxa_scream_blue_murder(s #endif /* ifdef DEBUG / else */ static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); -static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) { @@ -697,34 +696,6 @@ static inline void i2c_pxa_stop_message( writel(icr, _ICR(i2c)); } -static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) -{ - /* make timeout the same as for interrupt based functions */ - long timeout = 2 * DEF_TIMEOUT; - - /* - * Wait for the bus to become free. - */ - while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { - udelay(1000); - show_state(i2c); - } - - if (timeout < 0) { - show_state(i2c); - dev_err(&i2c->adap.dev, - "i2c_pxa: timeout waiting for bus free\n"); - return I2C_RETRY; - } - - /* - * Set master mode. - */ - writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); - - return 0; -} - /* * PXA I2C send master code * 1. Load master code to IDBR and send it. @@ -753,140 +724,6 @@ static int i2c_pxa_send_mastercode(struc return (timeout == 0) ? I2C_RETRY : 0; } -static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, - struct i2c_msg *msg, int num) -{ - unsigned long timeout = 500000; /* 5 seconds */ - int ret = 0; - - ret = i2c_pxa_pio_set_master(i2c); - if (ret) - goto out; - - i2c->msg = msg; - i2c->msg_num = num; - i2c->msg_idx = 0; - i2c->msg_ptr = 0; - i2c->irqlogidx = 0; - - i2c_pxa_start_message(i2c); - - while (i2c->msg_num > 0 && --timeout) { - i2c_pxa_handler(0, i2c); - udelay(10); - } - - i2c_pxa_stop_message(i2c); - - /* - * We place the return code in i2c->msg_idx. - */ - ret = i2c->msg_idx; - -out: - if (timeout == 0) { - i2c_pxa_scream_blue_murder(i2c, "timeout"); - ret = I2C_RETRY; - } - - return ret; -} - -/* - * We are protected by the adapter bus mutex. - */ -static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) -{ - long timeout; - int ret; - - /* - * Wait for the bus to become free. - */ - ret = i2c_pxa_wait_bus_not_busy(i2c); - if (ret) { - dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); - goto out; - } - - /* - * Set master mode. - */ - ret = i2c_pxa_set_master(i2c); - if (ret) { - dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); - goto out; - } - - if (i2c->high_mode) { - ret = i2c_pxa_send_mastercode(i2c); - if (ret) { - dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); - goto out; - } - } - - spin_lock_irq(&i2c->lock); - - i2c->msg = msg; - i2c->msg_num = num; - i2c->msg_idx = 0; - i2c->msg_ptr = 0; - i2c->irqlogidx = 0; - - i2c_pxa_start_message(i2c); - - spin_unlock_irq(&i2c->lock); - - /* - * The rest of the processing occurs in the interrupt handler. - */ - timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); - i2c_pxa_stop_message(i2c); - - /* - * We place the return code in i2c->msg_idx. - */ - ret = i2c->msg_idx; - - if (!timeout && i2c->msg_num) { - i2c_pxa_scream_blue_murder(i2c, "timeout"); - ret = I2C_RETRY; - } - - out: - return ret; -} - -static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, - struct i2c_msg msgs[], int num) -{ - struct pxa_i2c *i2c = adap->algo_data; - int ret, i; - - /* If the I2C controller is disabled we need to reset it - (probably due to a suspend/resume destroying state). We do - this here as we can then avoid worrying about resuming the - controller before its users. */ - if (!(readl(_ICR(i2c)) & ICR_IUE)) - i2c_pxa_reset(i2c); - - for (i = adap->retries; i >= 0; i--) { - ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); - if (ret != I2C_RETRY) - goto out; - - if (i2c_debug) - dev_dbg(&adap->dev, "Retrying transmission\n"); - udelay(100); - } - i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); - ret = -EREMOTEIO; - out: - i2c_pxa_set_slave(i2c, ret); - return ret; -} - /* * i2c_pxa_master_complete - complete the message and wake up. */ @@ -1093,6 +930,71 @@ static irqreturn_t i2c_pxa_handler(int t return IRQ_HANDLED; } +/* + * We are protected by the adapter bus mutex. + */ +static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) +{ + long timeout; + int ret; + + /* + * Wait for the bus to become free. + */ + ret = i2c_pxa_wait_bus_not_busy(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); + goto out; + } + + /* + * Set master mode. + */ + ret = i2c_pxa_set_master(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); + goto out; + } + + if (i2c->high_mode) { + ret = i2c_pxa_send_mastercode(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); + goto out; + } + } + + spin_lock_irq(&i2c->lock); + + i2c->msg = msg; + i2c->msg_num = num; + i2c->msg_idx = 0; + i2c->msg_ptr = 0; + i2c->irqlogidx = 0; + + i2c_pxa_start_message(i2c); + + spin_unlock_irq(&i2c->lock); + + /* + * The rest of the processing occurs in the interrupt handler. + */ + timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); + i2c_pxa_stop_message(i2c); + + /* + * We place the return code in i2c->msg_idx. + */ + ret = i2c->msg_idx; + + if (!timeout && i2c->msg_num) { + i2c_pxa_scream_blue_murder(i2c, "timeout"); + ret = I2C_RETRY; + } + + out: + return ret; +} static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { @@ -1126,6 +1028,103 @@ static const struct i2c_algorithm i2c_px .functionality = i2c_pxa_functionality, }; +/* Non-interrupt mode support */ +static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) +{ + /* make timeout the same as for interrupt based functions */ + long timeout = 2 * DEF_TIMEOUT; + + /* + * Wait for the bus to become free. + */ + while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { + udelay(1000); + show_state(i2c); + } + + if (timeout < 0) { + show_state(i2c); + dev_err(&i2c->adap.dev, + "i2c_pxa: timeout waiting for bus free\n"); + return I2C_RETRY; + } + + /* + * Set master mode. + */ + writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); + + return 0; +} + +static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, + struct i2c_msg *msg, int num) +{ + unsigned long timeout = 500000; /* 5 seconds */ + int ret = 0; + + ret = i2c_pxa_pio_set_master(i2c); + if (ret) + goto out; + + i2c->msg = msg; + i2c->msg_num = num; + i2c->msg_idx = 0; + i2c->msg_ptr = 0; + i2c->irqlogidx = 0; + + i2c_pxa_start_message(i2c); + + while (i2c->msg_num > 0 && --timeout) { + i2c_pxa_handler(0, i2c); + udelay(10); + } + + i2c_pxa_stop_message(i2c); + + /* + * We place the return code in i2c->msg_idx. + */ + ret = i2c->msg_idx; + +out: + if (timeout == 0) { + i2c_pxa_scream_blue_murder(i2c, "timeout"); + ret = I2C_RETRY; + } + + return ret; +} + +static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], int num) +{ + struct pxa_i2c *i2c = adap->algo_data; + int ret, i; + + /* If the I2C controller is disabled we need to reset it + (probably due to a suspend/resume destroying state). We do + this here as we can then avoid worrying about resuming the + controller before its users. */ + if (!(readl(_ICR(i2c)) & ICR_IUE)) + i2c_pxa_reset(i2c); + + for (i = adap->retries; i >= 0; i--) { + ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); + if (ret != I2C_RETRY) + goto out; + + if (i2c_debug) + dev_dbg(&adap->dev, "Retrying transmission\n"); + udelay(100); + } + i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); + ret = -EREMOTEIO; + out: + i2c_pxa_set_slave(i2c, ret); + return ret; +} + static const struct i2c_algorithm i2c_pxa_pio_algorithm = { .master_xfer = i2c_pxa_pio_xfer, .functionality = i2c_pxa_functionality,