From 314a3a062e5e8fe76b3c43a8731ffe4bd58bc1be Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Mon, 5 Nov 2018 17:40:20 +0800 Subject: [PATCH] arm64: dts: nxp: add more thermal zone support To enable all the supported thermal sensors, add sensor id information to thermal zone node. Dts for ls1012a, ls1046a, ls1043a, ls1088a are updated. Signed-off-by: Yuantian Tang --- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 39 ++++------------ arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 61 ++++++++++++-------------- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 57 ++++++++++-------------- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 53 +++++++--------------- 4 files changed, 75 insertions(+), 135 deletions(-) --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -28,7 +28,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; @@ -100,36 +100,7 @@ mask = <0x02>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" soc { compatible = "simple-bus"; @@ -573,3 +544,9 @@ }; }; }; + +&thermal_zones { + thermal-zone0 { + status = "okay"; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -39,7 +39,7 @@ * * Currently supported enable-method is psci v0.2 */ - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; @@ -148,38 +148,7 @@ mask = <0x02>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" timer { compatible = "arm,armv8-timer"; @@ -916,3 +885,29 @@ #include "qoriq-qman-portals.dtsi" #include "qoriq-bman-portals.dtsi" + +&thermal_zones { + thermal-zone0 { + status = "okay"; + }; + + thermal-zone1 { + status = "okay"; + }; + + thermal-zone2 { + status = "okay"; + }; + + thermal-zone3 { + status = "okay"; + }; + + thermal-zone4 { + status = "okay"; + }; + + thermal-zone5 { + status = "okay"; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -34,7 +34,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; @@ -116,38 +116,7 @@ mask = <0x02>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" timer { compatible = "arm,armv8-timer"; @@ -883,3 +852,25 @@ #include "qoriq-qman-portals.dtsi" #include "qoriq-bman-portals.dtsi" + +&thermal_zones { + thermal-zone0 { + status = "okay"; + }; + + thermal-zone1 { + status = "okay"; + }; + + thermal-zone2 { + status = "okay"; + }; + + thermal-zone3 { + status = "okay"; + }; + + thermal-zone4 { + status = "okay"; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -25,7 +25,7 @@ #size-cells = <0>; /* We have 2 clusters having 4 Cortex-A53 cores each */ - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; @@ -61,7 +61,7 @@ #cooling-cells = <2>; }; - cpu4: cpu@100 { + cooling_map1: cpu4: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x100>; @@ -128,42 +128,7 @@ }; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" timer { compatible = "arm,armv8-timer"; @@ -879,3 +844,15 @@ }; }; }; + +#include "fsl-tmu-map1.dtsi" + +&thermal_zones { + thermal-zone0 { + status = "okay"; + }; + + thermal-zone1 { + status = "okay"; + }; +};